toluène

7,99 €

🔒 Mode démo — cet article n'est pas à vendre.

Substance légale. dhscientific.com est une démonstration de la plateforme MOL-GOD — nous ne vendons rien et aucune commande n'est traitée. Les substances interdites sont bloquées ici automatiquement à partir du canon réglementaire (comparez p. ex. l'heptachlore).

Audit de votre FDS — gratuit → · Contact

MolGod_SDSCARD_1
REACH 2020/878
v33 · 21.07.2026
🧬 Visualiseur de molécule 3D
Chargement de la molécule...
Modèle 3D Toluen, CAS 108-88-3, formule brute C₇H₈, masse molaire 92.14 g/mol
Aperçu chimique: ToluenMolGod_OVERVIEW_1
Formule bruteC₇H₈
Masse moléculaire92.14 g/mol
Point de fusion-94.95 °C
Point d'ébullition110.63 °C
Densité0.8669 g/cm³
LogP (lipophilie)2.73
SMILESCc1ccccc1

Synonymes: Toluene · Methylbenzene

Sources des données : PubChem (NLM/NIH), Reid, Prausnitz, Poling 4th ed. (1987)
Dernière mise à jour : 2026-11-10

RECHERCHE SCIENTIFIQUE

[1]PubMed2025
Zhou W; Feng F; Zhang J; Cao S; Zhou Y; Li Y. 2025. "pH-Sensitive Porphyrin Metal-Organic Frameworks for Controlled Delivery of Para-Toluenesulfonamide and Photodynamic Cancer Therapy." Drug design, d
Beijing Hospital
[2]PubMed2025
Wei Z; Ni W; Mele G; Lü XF; Wang W; Jiang ZY. 2025. "Recyclable magnetic composites prepared by a novel reverse encapsulation reaction to increase benzene rings reactive sites for enhanced removal of
Chang'an University
📊 Propriétés physicochimiques

Aperçu rapide

Formule : C7H8
MW : 92.14 g/mol
CAS : 108-88-3
Aspect : Colorless liquid
Odeur : Sweet, pungent, benzene-like odor
Odeur : Sweet, pungent, benzene-like odor

Propriétés détaillées

Propriété Valeur Unité Conditions Source
Masse volumique (ρ) 0.8669 g/cm³ 20 °C (68 °F) Reid, Prausnitz, Poling 4th ed. (1987)
Point de fusion (mp) -94.95 °C (-138.9 °F) 1 atm Reid, Prausnitz, Poling 4th ed. (1987)
Point d'ébullition (bp) 231.1 °F at 760 mmHg (NTP, 1992) PubChem (NIH/NLM) ↗
Point d'éclair 40 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Pression de vapeur 10 mmHg at 43.5 °F ; 20 mmHg at 65.1 °F; 40 mmHg at 89.2 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Solubilité dans l'eau less than 1 mg/mL at 64 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Viscosité (η) 1.165 mPa-s at -25 °C (-13 °F); 0.778 mPa-s at 0 °C (32 °F); 0.560 mPa-s at 25 °C (77 °F); 0.424 mPa-s at 50 °C (122 °F); 0.333 mPa-s at 75 °C (167 °F); 0.270 mPa-s at 100 °C (212 °F) PubChem (NIH/NLM) ↗
Indice de réfraction (nD) 1.4961 20 °C (68 °F), D-line Reid, Prausnitz, Poling 4th ed. (1987)
🔬 Propriétés avancées
Tension superficielle 27.900 mN/m 20°C
Constante diélectrique (ε) 2.380 25°C
Capacité thermique (Cp) 1.700 J/(g·K) 25°C

Identifiants chimiques

SMILES: Cc1ccccc1
InChI: InChI=1S/C7H8/c1-7-5-3-2-4-6-7/h2-6H,1H3
InChIKey: YXFVVABEGXRONW-UHFFFAOYSA-N

Sources des données : PubChem, NIST Chemistry WebBook, CRC Handbook of Chemistry and Physics (103rd ed.)

Dernière mise à jour : 2026-06-09

Statut réglementaire de la substance
Cette substance est soumise à des exigences réglementaires : gestion des déchets dangereux (BDO); transport de marchandises dangereuses (ADR/RID/IMDG); précurseurs / substances psychotropes (registre GIS). Détails dans la section « Statut réglementaire (REACH/ECHA/CLP) » et sur la FDS. Information réglementaire — ne restreint pas l'achat dans la boutique.
🧮 Calculateur stœchiométriqueMolGod_STOICH_1
🔍 Identifiants externesMolGod_EXTID_1
14 sur 16 systèmes d'ID88%
Base de donnéesIdentifiantActions
CAS Registry Number108-88-3Ouvrir →
PubChem CID1140Ouvrir →
InChIKeyYXFVVABEGXRONW-UHFFFAOYSA-NOuvrir →
InChIInChI=1S/C7H8/c1-7-5-3-2-4-6-7/h2-6H,1H3
SMILESCc1ccccc1
EC Number203-625-9Ouvrir →
DrugBankDB11558Ouvrir →
KEGG CompoundC01455Ouvrir →
HMDBHMDB0034168Ouvrir →
ChemSpider1108Ouvrir →
MeSH UID (NLM)D014050Ouvrir →
UNII (FDA)3FPU23BG52Ouvrir →
NSC Number (NCI)406333Ouvrir →
WikiData QIDQ15779Ouvrir →

Sources : PubChem (NIH), Wikidata SPARQL, KEGG, ChEMBL (EBI), CompTox CTX (EPA).

📡 Spectroscopie — CAS 108-88-3MolGod_SPECHUB_MAIN
📊 Spectres (NMR, IR, MS, UV-Vis) (1)

Types de spectres disponibles : IR

Spectre IR (KBr, 4000-400 cm⁻¹)

440 points de données · Source : NIST WebBook · NIST ↗ · 📥 JCAMP-DX
📋 Tableau des pics (peak assignment)
Type Position Intensité Attribution
IR 450 1239 —
IR 452 1342 —
IR 454 923 —
IR 456 604 —
IR 458 387 —
IR 490 144 —
IR 492 94 —
IR 494 166 —
IR 496 202 —
IR 498 299 —
IR 530 186 —
IR 532 89 —
IR 534 52 —
IR 536 100 —
IR 538 142 —
IR 570 108 —
IR 572 69 —
IR 574 100 —
IR 576 265 —
IR 578 105 —
🎓 Guide d'interprétation des spectres (pour étudiants)
Comment lire un spectre IR
  • 3200-3600 cm⁻¹ — élongation O-H (pic large = liaison hydrogène)
  • 2850-3000 cm⁻¹ — élongation C-H (sp³)
  • 1650-1750 cm⁻¹ — élongation C=O (cétones, aldéhydes, esters)
  • 1400-1600 cm⁻¹ — vibrations du cycle aromatique
  • 1000-1300 cm⁻¹ — élongation C-O (éthers, alcools)
  • Aucune absorption = aucun groupe fonctionnel → comparer avec une référence

Sources : LibreTexts ↗, Silverstein (Spectrometric ID) ↗

📚 Références scientifiques (Chicago Author-Date) (9 sources)

📚 La bibliographie des ouvrages est en attente de génération. Des manuels généraux sélectionnés sont disponibles ci-dessous ; les ouvrages Google Books spécifiques au CAS peuvent être récupérés depuis le panneau d'administration.

  1. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  2. Spectral Database for Organic Structure Determination (SDBS). 2024. National Institute of Advanced Industrial Science and Technology (AIST), Japan. Accessed 2025-01-01. ↗
  3. Ulrich, Eldon L., Hideo Akutsu, John F. Doreleijers, Yoko Harano, Yannis E. Ioannidis, Jundong Lin, Miron Livny, et al. 2008. "BioMagResBank." Nucleic Acids Research 36 (D1): D402–D408. [DOI ↗]
  4. Horai, Hisayuki, Masanori Arita, Shigehiko Kanaya, Yoshito Nihei, Tasuku Ikeda, Kazuhiro Suwa, Yuya Ojima, et al. 2010. "MassBank: A Public Repository for Sharing Mass Spectral Data for Life Sciences." Journal of Mass Spectrometry 45 (7): 703–714. [DOI ↗]
  5. Linstrom, P.J., and W.G. Mallard, eds. 2024. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. ↗
  6. McDonald, M. Shane, Mike McAvoy, and Ajit Bhalerao. 1988. "JCAMP-DX: A Standard Form for Exchange of Infrared Spectra in Computer Readable Form." Applied Spectroscopy 42 (1): 151–162. [DOI ↗]
  7. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
📐 Propriétés physico-chimiques (base de données) 25 champs Score MolGod : Primaire
Propriété Valeur Unité Conditions Source
Point de fusion -94.95 [4][6][11] °C 1 atm Reid, Prausnitz, Poling 4th ed. (1987)
Point d'ébullition 110.63 [4][6][11] °C 760 mmHg Reid, Prausnitz, Poling 4th ed. (1987)
Solubilité dans l'eau 0.526 [4] g/L 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Masse volumique (ρ) 0.8669 [4] g/cm³ 20°C Reid, Prausnitz, Poling 4th ed. (1987)
Indice de réfraction (n_D) 1.4961 [4] — 20°C, sodium D Reid, Prausnitz, Poling 4th ed. (1987)
Viscosité (η) 0.560 [4] cP 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Pression de vapeur 28.400 [4] mmHg 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Point d'éclair 4.00 [4] °C closed cup Reid, Prausnitz, Poling 4th ed. (1987)
Température d'auto-inflammation 535.00 [4] °C in air Reid, Prausnitz, Poling 4th ed. (1987)
UV λmax 261 [4][2] nm water/MeOH Reid, Prausnitz, Poling 4th ed. (1987)
UV εmax 225 [4][2] M⁻¹·cm⁻¹ at λmax Reid, Prausnitz, Poling 4th ed. (1987)
UV λmax (alt) 208 [4][2] nm cyclohexane (E1 band) Reid, Prausnitz, Poling 4th ed. (1987)
logP (octanol/eau) 2.730 [4][8][9] — 25°C Reid, Prausnitz, Poling 4th ed. (1987)
logD (pH 7) 2.730 [4][8][9] — pH 7.4 Reid, Prausnitz, Poling 4th ed. (1987)
Constante diélectrique (ε) 2.380 [4] — 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Tension superficielle 27.900 [4] mN/m 20°C Reid, Prausnitz, Poling 4th ed. (1987)
Chaleur spécifique (cp) 1.700 [4] J/(g·K) 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Conductivité thermique (k) 0.1310 [4] W/(m·K) 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Moment dipolaire (μ) 0.360 [4] D gas phase Reid, Prausnitz, Poling 4th ed. (1987)
ΔH de vaporisation 38.060 [4] kJ/mol NBP Reid, Prausnitz, Poling 4th ed. (1987)
ΔH de fusion 6.640 [4] kJ/mol at mp Reid, Prausnitz, Poling 4th ed. (1987)
Température critique (Tc) 318.60 [4] °C critical point Reid, Prausnitz, Poling 4th ed. (1987)
Pression critique (Pc) 41.100 [4] bar critical point Reid, Prausnitz, Poling 4th ed. (1987)
Facteur acentrique (ω) 0.2630 [4] — Pitzer Reid, Prausnitz, Poling 4th ed. (1987)
Solubilité dans l'éthanol miscible [4] g/L 25°C Reid, Prausnitz, Poling 4th ed. (1987)
📚 Références scientifiques (Chicago Author-Date) (12 sources)
  1. Haynes, William M., ed. 2024. CRC Handbook of Chemistry and Physics. 105th ed. Boca Raton: CRC Press/Taylor & Francis. ISBN 978-1-032-55554-4. ↗
  2. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  3. Yaws, Carl L. 2014. The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals. 2nd ed. Oxford: Gulf Professional Publishing.
  4. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
  5. Marrero, J., and R. Gani. 2001. "Group-Contribution Based Estimation of Pure Component Properties." Fluid Phase Equilibria 183–184: 183–208. ↗
  6. Joback, K. G., and R. C. Reid. 1987. "Estimation of Pure-Component Properties from Group-Contributions." Chemical Engineering Communications 57 (1–6): 233–243. ↗
  7. Sangster, J. 1997. Octanol-Water Partition Coefficients: Fundamentals and Physical Chemistry. Chichester: Wiley. ISBN 978-0-471-97397-3.
  8. Mannhold, Raimund, and Han van de Waterbeemd. 2001. "Substructure and Whole Molecule Approaches for Calculating Log P." Journal of Computer-Aided Molecular Design 15 (4): 337–354. ↗
  9. Perrin, Ditlev D., Boyd Dempsey, and E. P. Serjeant. 1981. pKa Prediction for Organic Acids and Bases. London: Chapman and Hall. ISBN 0-412-21090-5.
  10. Constantinou, Leonidas, and Rafiqul Gani. 1994. "New Group Contribution Method for Estimating Properties of Pure Compounds." AIChE Journal 40 (10): 1697–1710. ↗
  11. Ertl, Peter, Bernhard Rohde, and Paul Selzer. 2000. "Fast Calculation of Molecular Polar Surface Area as a Sum of Fragment-Based Contributions and Its Application to the Prediction of Drug Transport Properties." Journal of Medicinal Chemistry 43 (20): 3714–3717. ↗
🔄 Convertisseur d'unités de concentration LIVE MolGod_UNITCONV_1

Saisissez la concentration Toluen dans n'importe quelle unité — le reste sera calculé automatiquement.

MW : 92.14 g/mol · IUPAC Gold Book ↗

⚗️ Formules de conversion + citations (par formule)
ConversionFormulePrécisionSource
% (w/v) ↔ molarityc (mol/L) = (% × 10) / MW±0.5% rel. when density ≈ 1.0 g/mLIUPAC (2019)
millimolar ↔ molarc (mol/L) = mM × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
molarity (mol/L)c = n/V = (m/MW)/V±0.1% (depends on MW precision)IUPAC (2019)
parts per million (mg/L) ↔ molarityc (mol/L) = ppm / (1000 × MW); equivalently ppm = mg/L for dilute aqueous±1% (density-independent for dilute solutions)IUPAC (2019)
mg/mL ↔ molarityc (mol/L) = (mg/mL × 1000) / MW / 1000 = mg/mL / MW × 1±0.2%Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
g/L ↔ molarityc (mol/L) = (g/L) / MW±0.1% (depends on MW precision)Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
mmol/L ↔ molarityc (mol/L) = mmol/L × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
Celsius ↔ KelvinT(K) = t(°C) + 273.15±0.01 K (ITS-90 scale)BIPM (Bureau International des Poids et Mesures) (2019)
Celsius ↔ FahrenheitT(°F) = T(°C) × 9/5 + 32±0.1 °FThompson A, Taylor BN (2008)
density-corrected % ↔ molarityc (mol/L) = (%w/w × ρ × 10) / MW, ρ in g/mL±0.1% when ρ known to 3 decimalsCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
📚 Bibliographie (8 sources faisant autorité)
  1. Thompson A, Taylor BN (2008). Guide for the Use of the International System of Units (SI). NIST Special Publication 811 · DOI: 10.6028/NIST.SP.811-2008
    → Primary SI standard for US scientific usage
  2. Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007). Quantities, Units and Symbols in Physical Chemistry — The IUPAC Green Book. RSC Publishing, 3rd ed. · DOI: 10.1039/9781847557889 · ISBN: 978-0-85404-433-7
    → Canonical IUPAC guide for chemistry quantities/units
  3. BIPM (Bureau International des Poids et Mesures) (2019). The International System of Units (SI), 9th edition. BIPM · ↗
    → International SI definitions (incl. redefined kilogram 2019)
  4. ISO/IEC (2022). Quantities and units — Part 1: General. International Organization for Standardization — ISO 80000-1:2022 · ↗
    → General rules for physical quantities and units
  5. ISO/IEC (2019). Quantities and units — Part 9: Physical chemistry and molecular physics. International Organization for Standardization — ISO 80000-9:2019 · ↗
    → Concentration / molality / amount-of-substance conventions
  6. Tiesinga E, Mohr PJ, Newell DB, Taylor BN (2021). CODATA recommended values of the fundamental physical constants: 2018. Rev. Mod. Phys. 93(2):025010 · DOI: 10.1103/RevModPhys.93.025010
    → Avogadro, gas constant, molar volume (2019 SI revision)
  7. IUPAC (2019). Compendium of Chemical Terminology — the IUPAC Gold Book (online). IUPAC · DOI: 10.1351/goldbook
    → Definitions of mass fraction, molality, normality, ppm, activity
  8. Mills IM, Cvitaš T, Homann K, Kallay N, Kuchitsu K (1988). Quantities, Units and Symbols in Physical Chemistry. Blackwell Scientific Publications, 1st ed. · ISBN: 0-632-01773-5
    → Historical predecessor of IUPAC Green Book
🧪 Assistant de préparation de solution WIZARD MolGod_PREP_1
① Sélectionnez la concentration
② Volume cible
③ Solvant

Calculs selon : IUPAC Gold Book ↗, Merck ↗

Compatibilité avec les solvantsMolGod_SOLV_1

Estimation basée sur la solubilité dans l'eau et le logP. Données indicatives — ne remplacent pas les études expérimentales.

SolvantCompatibilitéRemarquesRéférences
Water- Faiblele logP suggère une lipophilie
EtOH~ ModéréeSolubilité partielle
Acetone~ ModéréePartiellement compatible
DCM+ BonneDCM — bon pour les composés apolaires
DMSO~ ModéréeLe DMSO dissout la plupart des composés organiques
THF+ BonneTHF — large gamme de solubilité
Hexane+ BonneHexane — idéal pour les composés apolaires
CHCl3+ BonneCHCl3 — bon pour les composés moyennement polaires et apolaires

Sources des données pour logP/solubilité : logP: 2.73

📚 Références scientifiques pour les solvants (Chicago Author-Date) — cliquer pour développer

Chaque solvant dispose de 5 sources scientifiques indépendantes (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/GESTIS). Citations complètes ci-dessous.

Water · NIST CAS lookup ↗
  1. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  2. International Association for the Properties of Water and Steam (IAPWS). 1997. "Release on the Static Dielectric Constant of Ordinary Water Substance." IAPWS R8-97. [link ↗]
  3. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  4. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. https://doi.org/10.1201/9781420006834. [link ↗]
  5. IFA. n.d. "Water." GESTIS Substance Database. Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung. Accessed April 25, 2026. [link ↗]
EtOH · NIST CAS lookup ↗
  1. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  2. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  3. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. https://doi.org/10.1002/9780470508183. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. https://doi.org/10.1016/B978-0-340-64578-9.X5000-9. [link ↗]
  5. IFA. n.d. "Ethanol." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Acetone · NIST CAS lookup ↗
  1. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. [link ↗]
  5. IFA. n.d. "Acetone." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
DCM · NIST CAS lookup ↗
  1. National Institute of Standards and Technology. n.d. "Methane, dichloro- (CAS 75-09-2)." NIST Chemistry WebBook, SRD 69. Accessed April 25, 2026. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. International Agency for Research on Cancer. 1999. "Dichloromethane." IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 71: 251–315. [link ↗]
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  5. IFA. n.d. "Dichloromethane." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
DMSO · NIST CAS lookup ↗
  1. Wypych, George. 2019. Handbook of Solvents. Volume 1: Properties. 3rd ed. Toronto: ChemTec Publishing. https://doi.org/10.1016/C2018-0-02235-3. [link ↗]
  2. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  3. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  4. National Institute of Standards and Technology. n.d. "Methane, sulfinylbis- (CAS 67-68-5)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  5. IFA. n.d. "Dimethyl sulfoxide." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
THF · NIST CAS lookup ↗
  1. Armarego, Wilfred L. F., and Christina Li Lin Chai. 2009. Purification of Laboratory Chemicals. 6th ed. Oxford: Butterworth-Heinemann. https://doi.org/10.1016/B978-1-85617-567-8.50003-3. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. National Institute of Standards and Technology. n.d. "Furan, tetrahydro- (CAS 109-99-9)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. [link ↗]
  5. IFA. n.d. "Tetrahydrofuran." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Hexane · NIST CAS lookup ↗
  1. National Institute of Standards and Technology. n.d. "Hexane (CAS 110-54-3)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. [link ↗]
  4. Agency for Toxic Substances and Disease Registry. 1999. Toxicological Profile for n-Hexane. Atlanta, GA: U.S. Department of Health and Human Services. [link ↗]
  5. IFA. n.d. "n-Hexane." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
CHCl3 · NIST CAS lookup ↗
  1. International Agency for Research on Cancer. 1999. "Chloroform." IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 73: 131–182. [link ↗]
  2. National Institute of Standards and Technology. n.d. "Methane, trichloro- (CAS 67-66-3)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  3. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  5. IFA. n.d. "Chloroform." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Théorie de la solubilité (appliquée à la prédiction de la compatibilité) :
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. https://doi.org/10.1201/9781420006834 — Triplet HSP (dD, dP, dH) + formule Ra.
  3. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solwatochromia.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  5. PubChem Compound Database — CAS 108-88-3 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Bibliographie complète dans l'accordéon RÉFÉRENCES (en bas de la page) — Chicago Manual of Style 17th ed., Author-Date.

🔬 Guide de contrôle de la pureté Contrôle qualité

Vérifiez la pureté du réactif à l'aide de méthodes analytiques normalisées. Sélectionnez une méthode d'essai ci-dessous et saisissez vos résultats de mesure pour un calcul automatisé.

🛡️ Sécurité — CAS 108-88-3MolGod_SAFEHUB_MAIN
Avis sur les limitations des données. Les informations de sécurité figurant sur cette page sont fournies à titre indicatif et ne remplacent pas une fiche de données de sécurité (SDS) complète. Avant d'utiliser le produit, consultez la fiche de données de sécurité actuelle du fabricant ainsi que les directives GHS/CLP. La classification CLP s'applique à la substance pure en vrac, et non aux préparations commerciales.

Classification GHS/CLP — Règlement (CE) n° 1272/2008 + UN GHS Rev. 9 (2021).

⚠️ Danger
GHS02 — Inflammable
GHS02 Inflammable
GHS07 — Irritant / nocif
GHS07 Irritant / nocif
GHS08 — Danger pour la santé
GHS08 Danger pour la santé

🚨 Mentions de danger (H)

  • H225 — Liquide et vapeurs très inflammables.
  • H361d — Susceptible de nuire au fœtus.
  • H304 — Peut être mortel en cas d'ingestion et de pénétration dans les voies respiratoires.
  • H336 — Peut provoquer somnolence ou vertiges.
  • H373 — Risque présumé d'effets graves pour les organes à la suite d'expositions répétées ou d'une exposition prolongée.
  • H315 — Provoque une irritation cutanée.

🛡 Conseils de prudence (P)

  • P201 — Se procurer les instructions spéciales avant utilisation.
  • P210 — Tenir à l'écart de la chaleur, des surfaces chaudes, des étincelles, des flammes nues et de toute autre source d'inflammation. Ne pas fumer.
  • P261 — Éviter de respirer les poussières/fumées/gaz/brouillards/vapeurs/aérosols.
  • P280 — Porter des gants de protection/des vêtements de protection/un équipement de protection des yeux/du visage.

✓ Classification harmonisée conformément à l'annexe VI du règlement CLP (CE) 1272/2008 (classification officielle, contraignante). Numéro d'index : 601-021-00-3.

Référence (Chicago) : European Chemicals Agency. "toluene, Index No. 601-021-00-3." In Table 3 of Annex VI to Regulation (EC) No 1272/2008 (CLP Regulation), 23rd Adaptation to Technical Progress. Helsinki: European Chemicals Agency, 2026. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp.

⚠ IARC — Groupe 3: inclassable quant à sa cancérogénicité pour l'homme (évalué par l'IARC). (Évaluation indépendante des preuves de cancérogénicité par l'IARC/OMS — complète la classification CLP ci-dessus.)
Référence (Chicago) : IARC. 2026. IARC Monographs on the Identification of Carcinogenic Hazards to Humans: CAS 108-88-3. Lyon, France: International Agency for Research on Cancer, World Health Organization. https://monographs.iarc.who.int/list-of-classifications/. (Accessed 2026-11-12.)
Classification issue de la liste locale MOL-GOD (snapshot) — non vérifiée par rapport à la liste IARC actuelle. Vérifier

Traductions : Règlement CLP (CE) 1272/2008, Annexe III et IV. Données : PubChem/NLM.

📚 Références scientifiques consolidées — Chicago auteur-date 10 sources

Références collectées dans tous les onglets du Safety Hub. CAS : 108-88-3 · PubChem ↗

  1. Parlament Europejski i Rada UE. 2008. "Rozporządzenie (WE) nr 1272/2008 w sprawie klasyfikacji, oznakowania i pakowania substancji (CLP)." Dz.Urz. UE L 353. [↗] GHS, Réglementations
  2. United Nations Economic Commission for Europe (UNECE). 2021. "Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Ninth Revised Edition." United Nations, Geneva. [↗] GHS
  3. Goldfrank, Lewis R., Robert S. Hoffman, Mary Ann Howland, et al.. 2019. "Goldfrank's Toxicologic Emergencies, 11th ed.." McGraw-Hill Education, New York. ISBN 978-1-25-985961-8. Pierwsza pomoc, Toksykologia
  4. National Institute for Occupational Safety and Health (NIOSH). 2023. "NIOSH Pocket Guide to Chemical Hazards (DHHS Publ. 2005-149)." U.S. Department of Health and Human Services / CDC, Cincinnati, OH. [↗] Pierwsza pomoc, PPE, Toksykologia
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms." CEN, Brussels. [↗] PPE
  6. UNECE. 2023. "European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." United Nations, Geneva. [↗] Utylizacja, Regulacje
  7. National Fire Protection Association (NFPA). 2022. "NFPA 400 — Hazardous Materials Code." NFPA, Quincy, MA. [↗] Magazynowanie
  8. Urben, P.G. (ed.). 2017. "Bretherick's Handbook of Reactive Chemical Hazards, 8th ed.." Butterworth-Heinemann / Elsevier, Oxford. [↗] Magazynowanie
  9. Ministerstwo Klimatu i Środowiska RP. 2023. "Baza danych o produktach i opakowaniach oraz o gospodarce odpadami (BDO)." Ministerstwo Klimatu i Środowiska, Warszawa. [↗] Utylizacja
  10. International Agency for Research on Cancer (IARC / WHO). 2024. "IARC Monographs on the Identification of Carcinogenic Hazards to Humans — List of Classifications." WHO, Lyon. [↗] Toksykologia

Les onglets possédant leurs propres références (Emergency, PPE, Storage, Waste) contiennent des entrées bibliographiques supplémentaires au sein de leurs sections respectives.

📈 Statistiques analytiques (test t · RSD · Grubbs · Q-Dixon) ICH Q2

Collez une série de mesures répétées (CSV ou un nombre par ligne). Le calculateur calculera la moyenne, l'écart-type, l'IC à 95 %, et détectera les valeurs aberrantes (Grubbs + Dixon Q).

Séparateur : virgule, espace, tabulation, nouvelle ligne. Min. 3 mesures.
📐 Formules statistiques
  • x̄ = Σxᵢ / n — moyenne arithmétique
  • s² = Σ(xᵢ - x̄)² / (n-1) — variance de l'échantillon
  • s = √s² — écart-type
  • RSD% = (s / x̄) × 100% — écart-type relatif
  • CI₉₅ = x̄ ± t(0.05, n-1) × s / √n — Student's t
  • G = |xᵢ - x̄| / s — test de Grubbs
  • Q = |xsuspect - xnearest| / |xmax - xmin| — Dixon Q-test

Source : ICH Q2(R2) Validation of Analytical Procedures · ICH PDF ↗

🧪 Calculateur de recettes de tampons UNIQUE
Références : Valeurs de pKa issues de Goldberg NIST 81 · CRC Handbook 100th ed. · Stoll & Blanchard 1990 (DOI)

Choisissez un tampon dans la liste de 20 systèmes courants → saisissez le pH cible → vous obtiendrez une recette exacte avec les masses à peser.

Étape 1 : Choisissez un système tampon

📜 Historique des recettes (10 dernières)
🚚 Classification pour le transport (ADR / IATA / IMDG) UN1294
Numéro UN
UN1294
TOLUENE
Flammable

🛣️ ADR Transport routier

Classe:
3
Groupe d'emballage:
II
Désignation d'expédition:
TOLUENE
Code tunnel:
(D/E)
Limited Quantity (L):
1
Excepted Quantity:
E2

✈️ IATA Transport aérien

Classe:
3
Instructions d'emballage:
353 / 364
Quantité max (PAX):
5 L
Quantité max (CAO):
60 L

🚢 IMDG Transport maritime

Classe:
3
EmS Code:
F-E, S-D
🔬 Méthodes HPLC/GC (3 metod)
📄
The application of untargeted metabolomics coupled with chemometrics for the analysis of agitation effects on the sensory profiles of matcha tea
GC-MSCurrent Research in Food Science202490% ✓OAResearch method (specificity, robustness)
Colonne : C7, 6.5 μm
Phase : mobile phase B was acetonitrile
Détection : MS
Débit : 2.00 mL/min
Temp. : 20.0 °C
Inj.: 500 μL
Gradient: elution was as followed: 5% B, 0–2 min; 5–13% B, 2–8 min;…
Li S, Tian H, Zhu G, Wei Z. The application of untargeted metabolomics coupled with chemometrics for the analysis of agitation effects on the sensory profiles of matcha tea. Current Research in Food Science. 2024;9:100843. doi:10.1016/j.crfs.2024.100843
In the study, the effects of agitating parameters (different agitating rates and time) on the aroma and taste profiles of matcha tea were systematically investigated by the combination of untargeted metabolomics and chemometrics. The aroma profiles of matcha tea agitated at low rates (500 rpm) and for 30 s were more richness than that agitated with other parameters by sensory analysis and gas chromatography-ion mobility spectrometry. The key aroma compounds contributed to the sensory differences of matcha tea agitated at different rates and time were analyzed by gas chromatography-mass spectrometry and partial least square-discriminate analysis (PLS-DA), which were further verified by the triangle test. Thereinto, 2,4-decadienal associated with the sweet, brown and seaweed aroma significantly affected the aroma profiles of matcha tea with different agitating rates and time. The levels of bitterness and astringency were also higher in matcha tea with low agitating rates and time by sensory evaluation, which were attributed to the variations of phenolic compounds. Flavonol glycosides, gallic acid and (−)-gallocatechin were determined the key compound to the taste differences of matcha tea with different agitating parameters by the analysis of PLS-DA based on the results of high performance liquid chromatography and the sensory verification. And flavonol glycosides were mainly contributed to the bitterness and astringency, and gallic acid and (−)-gallocatechin influenced the umami and sweetness of matcha tea. Consequently, agitation has the potential to affect the sensory profiles of matcha tea by changing aroma and taste substances.
Matcha teaAgitationSensory panel testFlavor substancePartial least square-discriminate analysis
📄
Peel of Traditional Apple Varieties as a Great Source of Bioactive Compounds: Extraction by Micro-Matrix Solid-Phase Dispersion
HPLC-PDAFoods202088% ✓CC-BYResearch method (specificity, robustness)
Colonne : C18, 300 μm
Phase : mobile phase consists of A (water containing 1% formic acid) to B…
Détection : UV 600 nm
Débit : 1.00 mL/min
Temp. : 20.0 °C
Gradient: system (Millipore, Bedford, MA, USA) and the formic acid was…
Lončarić A, Matanović K, Ferrer P, Kovač T, Šarkanj B, Skendrović Babojelić M, et al. Peel of Traditional Apple Varieties as a Great Source of Bioactive Compounds: Extraction by Micro-Matrix Solid-Phase Dispersion. Foods. 2020;9:80. doi:10.3390/foods9010080
Micro matrix solid phase dispersion (micro-MSPD) was optimized by response surface methodology for the extraction of polyphenols from the peel of twelve traditional and eight commercial apple varieties grown in Croatia. The optimized micro-MSPD procedure includes the use of 0.2 g of sample, 0.8 g of dispersant, a 57% solution of methanol in water as the solvent and 5 mL of extract volume. The total polyphenolic index (TPI) and antioxidant activity (AA) were measured by spectrophotometric assays. Eighteen polyphenolic compounds were identified in all investigated apples by HPLC-DAD and LC-(ESI)-MS. The peel of traditional apple varieties had higher contents of all investigated polyphenols. Calculated relative contribution of polyphenol groups indicated non-flavonoids (28.6%) and flavanols (46.2%) as the major contributors to the total polyphenolic content in traditional and commercial apple varieties, respectively. The most abundant polyphenol in traditional apple peel was chlorogenic acid, procyanidin B2 and epicatechin (1143 ± 755 µg/g dw, 954 ± 343 µg/g dw and 560 ± 362 µg/g dw, respectively). The peel of varieties ‘Apistar’, ‘Bobovac’ and ‘Božićnica’ could be highlighted as an important source of polyphenols.
polyphenolsmatrix solid-phase dispersionapple peelexperimental design
📄
Comparative study of volatile and non-volatile flavor substances in squid from multiple origins
HPLCFood Chemistry: X202590% ✓OAResearch method (specificity, robustness)
Colonne : C5, 1 μm
Phase : mobile phases were mixed buffer of sodium citrate and citric acid (pH 3
Détection : MS
Débit : 2.00 mL/min
Temp. : 60.0 °C
Inj.: 2400 μL
Han M, Jiang X, Gui M, Liang Q, Gu Y, Song X, et al. Comparative study of volatile and non-volatile flavor substances in squid from multiple origins. Food Chemistry: X. 2025;27:102429. doi:10.1016/j.fochx.2025.102429
This study compared and analyzed the similarities and differences in odor and taste between Japanese flying squid and Equatorial, Indian Ocean, and Peruvian squid. Headspace gas chromatography-ion mobility spectrometry (HS-GC-IMS) and headspace solid-phase microextraction gas chromatography–mass spectrometry (HS-SPME-GC–MS), respectively, identified 52 and 43 volatile compounds, with aldehydes and alcohols being the main volatile substances. Cluster analyses showed that Equatorial squid were closest in odor to Japanese flying squid. A total of 16 free amino acids, 6 flavor nucleotides and 3 organic acids were identified from the four squid species by HPLC. There was no significant difference between Japanese flying squid and Peruvian squid in umami intensity. Hierarchical cluster analysis classified the flavors of the four squids into three categories, that was Equatorial squid and Japanese flying squid, Indian Ocean squid, Peruvian squid, which will provide a reference for raw material substitution of Japanese flying squid.
SquidFlavorDifferent originsTasteVolatile compounds
📈 Validation de la méthode (ICH Q2)

Aucune donnée de validation. Contactez l'auteur de la méthode.

Paramètres selon : ICH Q2(R2) ↗

📋 Comparaison des méthodes
Technique Colonne Temps d'analyse Détection Phase mobile Source
GC-MS C7 — MS mobile phase B was acetonitrile DOI ↗
HPLC-PDA C18 — UV 600 nm mobile phase consists of A (water containing 1%… DOI ↗
HPLC C5 — MS mobile phases were mixed buffer of sodium citrate… DOI ↗
🔧 Dépannage HPLC/GC
Pics larges / traînée
Causes : Colonne usée, mauvais pH de la phase, surcharge de la colonne, volume mort
Solution : Remplacer la colonne, vérifier le pH du tampon (±0.2), réduire le volume d'injection, vérifier les raccords
Dérive de la ligne de base
Causes : Phase mobile contaminée, gradient, température instable
Solution : Dégazer la phase, filtrer à 0.22 µm, stabiliser la température de la colonne, rincer le système
Aucun pic
Causes : Mauvaise longueur d'onde, la substance n'élue pas, décomposition thermique, mauvaise phase
Solution : Vérifiez λmax, allongez le gradient, abaissez la température, changez la phase mobile
Pics fantômes (ghost peaks)
Causes : Contamination du système, effet mémoire (carry-over), flacons contaminés
Solution : Nettoyer le système (MeOH/H₂O), utiliser des flacons neufs, injecter un blanc
Faible récupération
Causes : Adsorption sur les parois, extraction insuffisante, décomposition
Solution : Ajoutez un IS, silanisez la verrerie, optimisez l'extraction, vérifiez la stabilité

Sources : Snyder, Kirkland & Dolan ↗, Waters ↗

📊 Validation de la méthode HPLC (ICH Q2(R1)) PARTIAL

3 metrics need experimental data

Paramètre Valeur Unité Critère ICH Q2 Status
Linéarité (R²) aucune donnée unitless R² ≥ 0.999 (≥0.99 pour la bioanalytique) —
LOD (S/N = 3:1) aucune donnée ng/mL S/N ≥ 3:1 (concentration détectable la plus basse) —
LOQ (S/N = 10:1) aucune donnée ng/mL S/N ≥ 10:1 (LOQ ≥ 3×LOD typiquement) —
Précision (RSD intraday, n=6) aucune donnée % RSD RSD ≤ 2% (intraday) / ≤ 3% (interday) pour l'API —
Justesse (récupération, 3 niveaux) aucune donnée % (target 100±2%) Recovery 98-102% (target 100%) —
Plage de linéarité aucune donnée p. ex. 0.1-100 ng/mL Min. 80-120% de la concentration nominale —
Sélectivité/Spécificité aucune donnée qualitative Aucune interférence — pic d'analyte entièrement résolu (Rs ≥ 2.0) —
Robustesse (robustness) aucune donnée RSD < 2% à ±5% de variation RSD < 2% avec de petites variations de paramètres —
Légende : ✓ PASS ⚠ CAUTION ✗ FAIL — NO_DATA
📚 Références scientifiques (Chicago Author-Date) — cliquez pour développer

Normes de validation des méthodes analytiques — 4 sources indépendantes (ICH + USP + AOAC + Snyder).

  1. International Conference on Harmonisation (ICH). 2005. Validation of Analytical Procedures: Text and Methodology Q2(R1). ICH Expert Working Group. [link ↗] — Gold-standard ICH guideline — accepted by EMA, FDA, MHLW, NMPA
  2. United States Pharmacopeia (USP) Convention. 2024. USP General Chapter <621> Chromatography. USP-NF 2024 ed. USP. [link ↗]
  3. AOAC International. 2016. Appendix F: Guidelines for Standard Method Performance Requirements. AOAC INTERNATIONAL. [link ↗] — AOAC SMPR — alternative to ICH Q2 for food/dietary supplements
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. John Wiley & Sons. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗] — Industry standard textbook — Chapter 11 covers method validation
  5. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. Practical HPLC Method Development. 2nd ed. Wiley. ISBN 978-0-471-00703-6. — Classic method-development reference (DryLab heritage).
  6. Rozet, Eric, et al.. 2013. Analysis of recent pharmaceutical regulatory documents on analytical method validation. https://doi.org/10.1016/j.chroma.2007.03.111 [link ↗] — Comparison of FDA / EMA / ICH validation expectations — used for ICH Q2(R1) interpretation.
  7. Heyden, Yvan Vander, et al.. 2009. Robustness of pharmaceutical liquid chromatographic methods. https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗] — Plackett-Burman design for robustness — basis of ICH Q2 §3.7.
  8. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗] — Modern (UHPLC) update of validation chapter — practical RSD/LOD examples.
  9. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. 5th ed. Wiley. ISBN 978-0-470-68218-0. — European pharmacopeial perspective — complements USP/AOAC.
  10. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. HPLC for Pharmaceutical Scientists. Wiley-Interscience. ISBN 978-0-471-68162-4. https://doi.org/10.1002/9780470087954 [link ↗] — Pharma-focused validation case studies (specificity, robustness).
  11. European Medicines Agency (EMA). 2011. Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009. EMA Committee for Medicinal Products for Human Use. [link ↗] — EMA bioanalytical companion to ICH Q2(R1) for clinical samples.

· ⚠ Avertissements réglementaires SVHC/REACH ↑

🔧 Dépannage HPLC — arbre de décision 6 problèmes courants

Diagnostic des 12 problèmes HPLC les plus courants avec un arbre de décision (5 étapes par problème). Source : Snyder/Kirkland/Dolan 3rd ed. Chapter 17 + LCGC LC Troubleshooting columns 1989-2024.

Pics élargis (broad peaks) medium

Symptôme : Tous les pics du chromatogramme sont plus larges que prévu (FWHM > 2× la normale)

🔍 Arbre diagnostique :
  1. 1. Vérifiez si tous les pics sont élargis ou seulement certains
    → OUI : Tous → problème instrumental (colonne ou système)
    → NON : Seulement certains → problème de chimie (interaction avec la colonne pour des analytes spécifiques)
  2. 2. Remplacez par une colonne de test — le problème disparaît-il ?
    → OUI : COLONNE usée — garnissage endommagé, void dans les premiers mm. Remplacez-la.
    → NON : Problème dans le système LC
  3. 3. Vérifiez le volume mort (dead volume) — boucle d'injection, connexions, détecteur
    → OUI : Boucle > 100 µL pour une colonne de 4.6 mm ou connexions desserrées → remplacez les ferrules, raccourcissez les tubes
    → NON : Continuer le diagnostic
  4. 4. Test de température : augmentez la colonne de 25°C à 40°C
    → OUI : Pics plus étroits → cinétique de transfert de masse trop lente (augmentez T)
    → NON : Continue
  5. 5. Vérifiez le débit par rapport à l'optimum de van Deemter pour cette colonne
    → OUI : Optimum pour 4.6mm/5µm = 1.0 mL/min, pour 2.1mm/3µm = 0.4 mL/min
    → NON : Continue
⚠️ Causes courantes :
  • Colonne usée (>2000 injections sans précolonne)
  • Volume mort du système > 100 µL (mauvaise boucle, tubes longs, ferrules desserrées)
  • Température trop basse (cinétique de transfert de masse)
  • Débit hors de l'optimum de van Deemter
  • Solvant d'échantillon plus fort que la phase A
✓ Solutions :
  • ✓ Remplacez la colonne (si >2000 injections)
  • ✓ Vérifiez toutes les connexions — tubes aussi courts que possible
  • ✓ Augmentez la T de la colonne à 40°C (si la substance est stable)
  • ✓ Réduisez le débit à l'optimum de van Deemter
  • ✓ Dissolvez l'échantillon dans la phase A (pas dans un solvant organique pur)
Traînée des pics (tailing, T > 1.5) high

Symptôme : Les pics présentent une "traînée" allongée du côté de l'élution tardive (asymétrie T = b/a > 1.5 selon l'USP)

🔍 Arbre diagnostique :
  1. 1. La substance contient-elle des groupes basiques (amino, pyridine) ?
    → OUI : Oui → interactions silanol ! Ajoutez 0.1% de TFA ou 5-10 mM de TEA à la phase A.
    → NON : Continue
  2. 2. Vérifiez le pH de la phase mobile par rapport au pKa de la substance
    → OUI : pH = pKa ± 1 → ionisation partielle, peak split. Placez le pH à ≥ 2 unités du pKa.
    → NON : Continue
  3. 3. Vérifiez l'âge de la colonne (>1500 injections ?)
    → OUI : Oui → silanols exposés (column bleed). Remplacez par une colonne à endcapping supérieur (XTerra, Symmetry).
    → NON : Continue
  4. 4. L'échantillon contient-il des métaux (Fe, Cu provenant des flacons en verre) ?
    → OUI : Oui → utilisez des flacons incolores de type II ou en PFA. EDTA 0.1mM dans l'échantillon.
    → NON : Continue
⚠️ Causes courantes :
  • Interactions silanol (analyte basique + silanols libres du gel de silice)
  • pH à la limite du pKa de l'analyte (peak split)
  • Colonne ancienne (column bleed, activité silanol élevée)
  • Métaux dans l'échantillon (chélation → traînée)
  • Surcharge de la colonne (>50 µg sur une colonne de 4.6mm)
✓ Solutions :
  • ✓ Ajoutez 0.1% de TFA (UV) ou 0.1% d'acide formique (LC-MS) à la phase A
  • ✓ Choisissez une colonne à endcapping haute pureté : Waters XBridge BEH, Phenomenex Kinetex
  • ✓ Travaillez à un pH ≥ 2 unités du pKa
  • ✓ EDTA 0.1mM dans l'échantillon (chélation Fe/Cu)
  • ✓ Réduisez le volume d'injection à ≤ 20 µL pour une colonne de 4.6mm
Dérive de la ligne de base (baseline drift) medium

Symptôme : La ligne de base monte ou descend systématiquement pendant >5 minutes

🔍 Arbre diagnostique :
  1. 1. Utilisez-vous un gradient (B% augmente) ?
    → OUI : Oui → absorption différente des phases A vs B à dλ. Changement de solvant dans la coupure UV. Vérifiez l'absorbance UV du % d'organique.
    → NON : Continuer (isocratique)
  2. 2. Vérifiez la température de la colonne — est-elle stable à ±0.5°C ?
    → OUI : Oui (stable) → continuer
    → NON : Instable → activez le thermostat de colonne (>25°C contrôlé)
  3. 3. Test : coupez l'échantillonneur automatique, faites fonctionner seuls pompe+colonne+détecteur
    → OUI : La dérive disparaît → contamination de l'échantillonneur automatique (nettoyage de l'aiguille, septum)
    → NON : Continue
  4. 4. Vérifiez l'âge de la lampe (D2 pour UV)
    → OUI : Oui (>1500 heures) → remplacez la lampe
    → NON : Continue
⚠️ Causes courantes :
  • Élution en gradient avec coupure UV différente des phases
  • T de colonne instable
  • Contamination de l'aiguille/septum de l'échantillonneur automatique
  • Lampe UV ancienne (>1500h)
  • Cellule à circulation du détecteur encrassée
  • Colonne non équilibrée (<10 volumes de colonne)
✓ Solutions :
  • ✓ Pré-équilibrez la colonne sur 10-15 volumes de colonne à 100% A
  • ✓ Thermostat de colonne activé, T 30-40°C stable
  • ✓ Nettoyez la cellule à circulation du détecteur avec une solution 50:50 ACN:H2O
  • ✓ Remplacez la lampe D2 si >1500h
  • ✓ Utilisez la soustraction de ligne de base (Chromeleon, fonction native d'Empower)
Absence de pic / pic perdu (no peak) critical

Symptôme : Le pic d'analyte attendu n'apparaît pas sur le chromatogramme

🔍 Arbre diagnostique :
  1. 1. L'injection a-t-elle réellement eu lieu ?
    → OUI : Vérifiez le journal du passeur d'échantillons, la pression des pompes (elle devrait chuter lors de l'injection)
    → NON : Problème de passeur d'échantillons → vérifiez la boucle, l'aiguille, l'échantillon dans le flacon
  2. 2. L'échantillon est-il dans le flacon (volume correct, non évaporé) ?
    → OUI : Continue
    → NON : Pas d'échantillon — repipetez
  3. 3. Stabilité de l'échantillon — préparé il y a >24h ?
    → OUI : Oui → dégradation. Préparez un nouvel échantillon frais.
    → NON : Continue
  4. 4. Vérifiez la longueur d'onde de détection par rapport au λmax de la substance
    → OUI : La détection à λ ne correspond PAS au λmax → pas de signal. Scannez le DAD 200-400nm.
    → NON : Continue
  5. 5. Test : injectez un étalon pur (de concentration connue, frais)
    → OUI : L'étalon donne un pic → problème avec l'échantillon (matrice, dérivatisation)
    → NON : Pas de pic même avec l'étalon → problème du système (colonne, phase, gradient)
⚠️ Causes courantes :
  • Échantillon non prélevé du flacon (bug du passeur d'échantillons)
  • Échantillon dégradé (>24h pH/temp/lumière)
  • Détection à la mauvaise longueur d'onde
  • Phase mobile incorrecte (p. ex. TFA oublié)
  • Colonne inversée / phase stationnaire incorrecte
  • La substance est éluée au front (V0) → non retenue, non visible
✓ Solutions :
  • ✓ Préparez un nouvel échantillon frais selon le protocole exact
  • ✓ Scan UV-Vis DAD 200-400nm + recherche du λmax
  • ✓ Vérifiez la composition de la phase mobile — le TFA a-t-il été ajouté ?
  • ✓ Testez le sens inverse de la colonne (prudemment !)
  • ✓ Pour une rétention <1 min — abaissez le % B, MeOH au lieu d'ACN
  • ✓ Vérifiez la table "expected_rt" dans wp_molgod_hplc_methods
Pression trop élevée (pressure too high) critical

Symptôme : Pression des pompes > 80% du maximum de la colonne ou arrêt du système avec une erreur de haute pression

🔍 Arbre diagnostique :
  1. 1. Vérifiez que la colonne est raccordée correctement (sens de la flèche)
    → OUI : OK
    → NON : Colonne inversée → retournez-la (ne jamais l'utiliser "à l'envers")
  2. 2. Test : retirez la colonne du système, faites tourner la pompe+le détecteur seuls
    → OUI : La pression chute à <50 bar → problème dans la colonne (bouchée)
    → NON : La pression reste élevée → filtre en ligne bouché, fritte encrassée
  3. 3. Vérifiez le filtre de pré-colonne (fritte en ligne)
    → OUI : Encrassé et brun → remplacez-le
    → NON : Continue
  4. 4. Rincez la colonne à contre-courant avec 50:50 ACN:H2O sans la colonne — cela disparaît-il ?
    → OUI : Particules coincées dans le premier mm — un rinçage de 30 min peut la récupérer
    → NON : Remplacez la colonne
⚠️ Causes courantes :
  • Filtre en ligne (fritte) bouché par des particules
  • Relargage du tampon (précipitation à un % B élevé)
  • L'échantillon contient des matières en suspension (filtrer à 0.22 µm avant l'injection)
  • Colonne bouchée (column bed compaction)
  • Gradient avec phase tampon + beaucoup d'organique → précipitation de sel
✓ Solutions :
  • ✓ Filtrez TOUJOURS l'échantillon à 0.22 µm PVDF avant l'injection
  • ✓ Remplacez le filtre en ligne toutes les 100 injections (ou lorsque la pression augmente de >20%)
  • ✓ N'utilisez PAS >20mM de tampon phosphate + >70% d'ACN (le sel précipite)
  • ✓ Rincez la colonne 30 min avec 50:50 ACN:H2O en sens inverse (lorsque le fabricant l'autorise)
  • ✓ Pré-colonne 4×3mm pour protéger la colonne principale
Pics fantômes (ghost peaks) high

Symptôme : Pics inexpliqués sur le chromatogramme, absents de la calibration

🔍 Arbre diagnostique :
  1. 1. Test : injection à blanc (solvant pur de l'échantillon)
    → OUI : Un pic fantôme apparaît → contamination du système ou des éluants
    → NON : Apparaît uniquement avec l'échantillon → matrice
  2. 2. Le pic fantôme croît-il avec le gradient (élue à % B élevé) ?
    → OUI : Oui → colonne surchargée ou composé fortement retenu d'un cycle précédent
    → NON : Indépendant du gradient → effet mémoire (carryover) du passeur d'échantillons
  3. 3. Increase carryover wash (between injections)
    → OUI : Cela aide → l'effet mémoire (carryover) était en cause. Protocole de lavage plus puissant.
    → NON : Continue
  4. 4. Injection d'eau pure — y a-t-il un pic ?
    → OUI : Oui → contamination de la source d'eau (organiques provenant du système DI)
    → NON : Continue
⚠️ Causes courantes :
  • Effet mémoire (carryover) dans l'aiguille/la boucle du passeur d'échantillons
  • Contamination de l'éluant (même de qualité HPLC)
  • Composants fortement retenus de cycles précédents
  • Plastique dans les flacons (phtalates, PEG des capuchons)
  • Eau DI insuffisamment purifiée
✓ Solutions :
  • ✓ Renforcez le protocole de lavage : 100% B → 100% A → 50:50 (3 cycles)
  • ✓ Lavage puissant : DMSO 100% ou MeOH 100% avant la calibration
  • ✓ Filtrez les éluants à 0.22 µm PTFE en cas de doute
  • ✓ Utilisez du verre ambré + des capuchons à revêtement Téflon pour les échantillons
  • ✓ Rampe de gradient périodique jusqu'à 100% B pendant 10 min (nettoyage)
📚 Références scientifiques (Chicago Author-Date) — cliquez pour développer
  1. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. John Wiley & Sons. Chapter 17 (Troubleshooting) pp. 559-616. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗]
  2. Dolan, John W.. 2014. LC Troubleshooting (monthly column 1989-2024). LCGC North America. [link ↗] — John Dolan 35-letnia seria miesięcznych artykułów problemowych
  3. Kromidas, Stavros. 2017. HPLC Made to Measure: A Practical Handbook for Optimization. 2nd ed. Wiley-VCH. ISBN 978-3-527-31377-1. — Praktyczny przewodnik problem-solving dla labs analitycznych
  4. Dolan, John W.. 2013. When to Modify Method Conditions. 192-199. [link ↗] — Decision flow for changing flow rate / temperature / %B vs swapping columns.
  5. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗] — Chapter 9 covers troubleshooting modern UHPLC systems (sub-2 µm particles).
  6. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. 5th ed. Wiley. ISBN 978-0-470-68218-0. — Solid step-by-step problem isolation chapter (eluents, columns, instruments).
  7. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. Practical HPLC Method Development. 2nd ed. Wiley. ISBN 978-0-471-00703-6. — Method-development companion volume with troubleshooting cross-refs.
  8. Carr, Peter W.. 2009. The new physical chemistry of HPLC. 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗] — Theoretical basis for diagnosing efficiency losses (mass-transfer, eddy diffusion).
  9. Heyden, Yvan Vander, et al.. 2009. Robustness of pharmaceutical liquid chromatographic methods. 2120-2129. https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗] — How to diagnose method failures vs. system failures (Plackett-Burman).
  10. Engelhardt, Heinz. 2014. 100 Years of Chromatography. 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5. — Historical context for ghost-peak phenomenology (silica chemistry).
  11. Stoll, Dwight R., and Peter W. Carr. 2017. Two-Dimensional Liquid Chromatography: A State of the Art Tutorial. 519-531. https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. The new physical chemistry of HPLC. 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations. 1167-1182. https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. 100 Years of Chromatography. 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. Probabilistic approach to peak deconvolution in chromatography. 8525-8531. https://doi.org/10.1021/ac101742z [link ↗]
🧪 Solubilité et compatibilité avec les solvants MolGod_SOLUB_1
Molécule
Toluen
Formule
C₇H₈
logP
2.70
Masse (g/mol)
92.14
Polarité
Hydrophobe (apolaire)

⚠️ Estimation HSP (littérature / contribution de groupes). Données indicatives — ne remplacent pas les études expérimentales.

Solvant Compat. Ra Visuel GC-MS HPLC Applications Références
Water (H₂O)− Faible43.2
✗ NieA (aqueous) (RP)
tamponculture cellulaireanalytiqueextraction (hydrophile)
Ethanol (EtOH)− Faible19.4
✗ NieA/B modifier (RP/NP)
extractionspectroscopie (UV-Vis)synthèsemodificateur HPLC
Methanol (MeOH)− Faible23.8
✗ NieA/B (RP) (RP)
HPLC (eluent)LC-MSKarl FischerUV-transparent do 205 nm
Acetone− Faible11.4
✗ NieB modifier (NP)
GC headspacecristallisationdégraissagesynthèse
Acetonitrile (ACN)− Faible17.9
✗ NieB (RP) (RP)
éluant HPLC (référence absolue)LC-MS (wolny cut-off UV 190 nm)analyse des peptides
DMSO− Faible17.1
✗ NieN/A (N/A)
NMR (d6-DMSO)biologie cellulaire (cryoconservation)administration de médicamentssynthèse
THF~ Moy.7.8
✗ NieB (NP) (NP)
GPC/SEC (analyse des polymères)synthèse de Grignardorganométalliques
DCM (CH₂Cl₂)+ Bonne6.4
✓ TakB (NP) (NP)
extractionNP-HPLCGC-MScristallisation (anti-solvant)
Chloroform (CHCl₃)+ Bonne4.1
✓ TakN/A (toxic) (N/A)
NMR (CDCl3)extraction des lipides (méthode de Folch)NP-TLC
Hexane+ Bonne6.7
✓ TakA (NP) (NP)
NP-HPLCextraction des huiles (lipides)GC-MSTLC (NP)
Toluene+ Bonne0.0
✓ TakB (NP) (NP)
NMR (d8-toluene)synthèseséchage azéotropique Dean-Stark
📚 Références scientifiques pour les solvants (Chicago Author-Date) — cliquez pour développer

11 solvants × 5 sources scientifiques indépendantes (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/Wypych/Armarego/Snyder/GESTIS). 55+ citations complètes ci-dessous.

Water (H₂O)
  1. NIST — NIST Chemistry WebBook — Water (CAS 7732-18-5)
  2. CRC — CRC Handbook of Chemistry and Physics, 104th ed., Sec. 8 (Properties of Water)
  3. IAPWS — IAPWS Release on Static Dielectric Constant of Water
  4. Reichardt 2011 — Solvents and Solvent Effects in Organic Chemistry
  5. GESTIS — GESTIS Substance Database — Water
Ethanol (EtOH)
  1. NIST — NIST Chemistry WebBook — Ethanol (CAS 64-17-5)
  2. CRC — CRC Handbook — Ethanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — Ethanol eluotropic
  4. Smallwood — Handbook of Organic Solvent Properties — Ethanol
  5. GESTIS — GESTIS Substance Database — Ethanol
Methanol (MeOH)
  1. NIST — NIST Chemistry WebBook — Methanol (CAS 67-56-1)
  2. CRC — CRC Handbook — Methanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — MeOH eluotropic, eo=0.95
  4. GESTIS — GESTIS Substance Database — Methanol
Acetone
  1. NIST — NIST Chemistry WebBook — Acetone (CAS 67-64-1)
  2. CRC — CRC Handbook — Acetone physical & thermodynamic constants
  3. Hansen 2007 — Hansen Solubility Parameters — Acetone (dD=15.5, dP=10.4, dH=7.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Acetone
  5. GESTIS — GESTIS Substance Database — Acetone
Acetonitrile (ACN)
  1. NIST — NIST Chemistry WebBook — Acetonitrile (CAS 75-05-8)
  2. CRC — CRC Handbook — Acetonitrile constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — ACN gold-standard HPLC eluent
  4. Reichardt 2011 — Solvents and Solvent Effects — ACN dipolar aprotic
  5. GESTIS — GESTIS Substance Database — Acetonitrile
DMSO
  1. NIST — NIST Chemistry WebBook — DMSO (CAS 67-68-5)
  2. Wypych 2019 — Handbook of Solvents Vol. 1 — DMSO comprehensive properties
  3. Hansen 2007 — HSP — DMSO (dD=18.4, dP=16.4, dH=10.2)
  4. Reichardt 2011 — Solvents and Solvent Effects — DMSO E_T(30)=45.1, dipolar aprotic
  5. GESTIS — GESTIS Substance Database — DMSO
THF
  1. NIST — NIST Chemistry WebBook — THF (CAS 109-99-9)
  2. Armarego 2009 — Purification of Laboratory Chemicals — THF drying & peroxide test
  3. Hansen 2007 — Hansen Solubility Parameters — THF (dD=16.8, dP=5.7, dH=8.0)
  4. Smallwood — Handbook of Organic Solvent Properties — THF
  5. GESTIS — GESTIS Substance Database — Tetrahydrofuran
DCM (CH₂Cl₂)
  1. NIST — NIST Chemistry WebBook — Dichloromethane (CAS 75-09-2)
  2. IARC 71 — IARC Monograph 71 — DCM (Group 2A carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — DCM (dD=18.2, dP=6.3, dH=6.1)
  4. Reichardt 2011 — Solvents and Solvent Effects — DCM polarity index
  5. GESTIS — GESTIS Substance Database — Dichloromethane
Chloroform (CHCl₃)
  1. NIST — NIST Chemistry WebBook — Chloroform (CAS 67-66-3)
  2. IARC 73 — IARC Monograph 73 — Chloroform (Group 2B carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — CHCl3 (dD=17.8, dP=3.1, dH=5.7)
  4. Reichardt 2011 — Solvents and Solvent Effects — CHCl3 H-bond donor strength
  5. GESTIS — GESTIS Substance Database — Chloroform
n-Hexane
  1. NIST — NIST Chemistry WebBook — n-Hexane (CAS 110-54-3)
  2. ATSDR n-Hexane — ATSDR Toxicological Profile for n-Hexane — neuropatia obwodowa (n-Heksan NIE jest kancerogenem IARC)
  3. Hansen 2007 — Hansen Solubility Parameters — n-Hexane (dD=14.9, dP=0, dH=0)
  4. Snyder & Kirkland — Modern Liquid Chromatography — n-Hexane NP standard, eo=0.00
  5. GESTIS — GESTIS Substance Database — n-Hexane
Toluene
  1. NIST — NIST Chemistry WebBook — Toluene (CAS 108-88-3)
  2. IARC 71 — IARC Monograph 71 — Toluene
  3. Hansen 2007 — Hansen Solubility Parameters — Toluene (dD=18.0, dP=1.4, dH=2.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Toluene
  5. GESTIS — GESTIS Substance Database — Toluene
Théorie de la solubilité (appliquée à la prédiction de la compatibilité) :
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. CRC Press. https://doi.org/10.1201/9781420006834 — Triplet HSP (dD, dP, dH) + formule Ra.
  3. Stefanis, E., and C. Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." Int J Thermophys 29: 568–585. https://doi.org/10.1007/s10765-008-0415-z
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solwatochromia.
  5. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  6. Van Krevelen, D. W., and K. Te Nijenhuis. 2009. Properties of Polymers. 4th ed. Elsevier. https://doi.org/10.1016/B978-0-08-054819-7.X0001-5 — Hoftyzer–Van Krevelen group contribution dla dD/dP/dH z SMILES.
  7. Marcus, Yizhak. 1998. The Properties of Solvents. Wiley Series in Solution Chemistry, Vol. 4. ISBN 9780471983699 — Ensemble tabulaire complet de 250+ solvants (ε, μ, donicité, nombres accepteurs).
  8. PubChem Compound Database — CAS 108-88-3 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Bibliographie complète dans l'accordéon RÉFÉRENCES (en bas de la page) — Chicago Manual of Style 17th ed., Author-Date.

📚 FAQ technique — Toluen (5) MolGod_TECHFAQ_1
❓ Jak przygotować roztwór standardowy toluenu o stężeniu 10 mg/ml?
Aby przygotować roztwór standardowy toluenu o stężeniu 10 mg/ml, należy odważyć dokładnie 10 mg czystego toluenu (CAS 108-88-3) i rozpuścić w 1 ml rozpuszczalnika (np. heksanu lub dichlorometanu). Masa molowa toluenu wynosi 92.14 g/mol, więc 10 mg to około 0.108 mmol. Roztwór należy dokładnie wymieszać i przechowywać zgodnie z zaleceniami dotyczącymi przechowywania toluenu.
Utile ?
❓ W jakich warunkach należy przechowywać toluen 100ml czysty odczynnik CAS 108-88-3?
Toluen należy przechowywać w szczelnie zamkniętym pojemniku, w temperaturze poniżej 25°C, z dala od bezpośredniego światła słonecznego i źródeł ciepła. Wilgotność powietrza nie powinna przekraczać 60%. Przechowywanie w warunkach chłodniczych (4-8°C) jest zalecane dla długotrwałego przechowywania.
Utile ?
❓ Jaka metoda analityczna jest najbardziej odpowiednia do analizy toluenu o masie molowej 92.14 g/mol i logP około 0.5?
Dla toluenu o masie molowej 92.14 g/mol i logP około 0.5, najbardziej odpowiednią metodą analityczną jest chromatografia gazowa (GC) z detektorem płomieniowo-jonizacyjnym (FID). Metoda ta jest preferowana ze względu na niską polarność i lotność toluenu, co pozwala na efektywne rozdzielenie i analizę próbki.
Utile ?
❓ Jakie są potencjalne reakcje i niezgodności chemiczne toluenu z innymi substancjami?
Toluen może reagować z silnymi utleniaczami, takimi jak nadmanganian potasu (KMnO4) lub dichromian potasu (K2Cr2O7), prowadząc do jego utlenienia. Nie należy mieszać toluenu z kwasami Lewisa, takimi jak chlorek glinu (AlCl3) czy fluorek boru (BF3), ponieważ może to prowadzić do niepożądanych reakcji. Toluen jest również niezgodny z wodą i innymi polarnymi rozpuszczalnikami, tworząc mieszaniny o ograniczonej stabilności.
Utile ?
❓ W jakich praktycznych zastosowaniach laboratoryjnych wykorzystuje się toluen 100ml czysty odczynnik CAS 108-88-3?
Toluen jest szeroko stosowany jako rozpuszczalnik w syntezie organicznej, np. do rozpuszczania tłuszczów, olejów i żywic. Jest również używany jako reagent w reakcjach alkilacji i acylacji. W laboratoriach analitycznych toluen jest wykorzystywany jako standard w chromatografii gazowej (GC) oraz jako rozpuszczalnik w przygotowaniu próbek do analizy.
Utile ?
🧮 Calculateurs de laboratoire (8) MolGod_LABCALC_1
Dilution (C₁V₁=C₂V₂)
Molarité (M=n/V)
Tampon pH (Henderson-Hasselbalch)
Beer-Lambert (A=εcl)
Masse → Moles
Concentration % → M
ppm → mg/L
Température C↔F↔K

Formules vérifiées : IUPAC Gold Book ↗, DOI ↗

📊 Bases de spectres spectroscopiques MolGod_SPECDB_3
📋 Générateur de protocole de laboratoire MolGod_PROTOCOL_1

Protocole généré à partir de : GHS SDS, Aldrich Lab Guide ↗

🏷️ Générateur d'étiquette (QR) MolGod_LABEL_1
Toluène• Toluene / Methylbenzene• CAS: 108-88-3• Formule: C7H8• Masse: 92.14 g/molDANGERMENTIONS DE DANGER GHS :H225: Liquide et vapeurs très inflammables.H304: Peut être mortel en cas d'ingestion et de pénétration dans les voies respiratoires.H336: Peut provoquer somnolence ou vertiges.H373: Risque présumé d'effets graves pour les organes à la suite d'expositionsDH ScientificScience first. Commerce as consequence.N° de lot: Masse nette: Fabr.:
ADMET — Profil pharmacologique
Chargement des prédictions ADMET…
⏳ Conseiller de stabilité & durée de conservation Arrhenius
Méthodologie : Arrhenius equation k = A·exp(-Ea/RT). Citation : Connors KA et al. 1986 · ICH Q1A(R2)

Saisissez les conditions de stockage → l'algorithme d'Arrhenius prédira la concentration restante, la demi-vie et une recommandation d'utilisation.

Signes visuels de dégradation :
❄️ Recommandations de conservation
Temperature:
15-25°C
Light:
Ambient
Container:
HDPE/glass
Incompatible:
Strong oxidizers
🧪 Assistant de préparation de solution (Smart Prep) MolGod_PREP_2

Saisissez ce que vous souhaitez préparer — je générerai un SOP

Exemples ci-dessous — cliquez pour insérer :
Recettes prédéfinies :
📚 Aperçu de la littérature scientifique — CAS 108-88-3MolGod_LITHUB_MAIN
⭐ Principales découvertes (littérature scientifique) 6 publications
🏆 CAS 108-88-3 — multi-criteria ranking (W12): 30% citations · 20% actualité · 20% thème · 15% historique · 15% open access.
  1. #1
    Friedel, C.; Crafts, J.M. (review) (1979) · Organic Reactions
    Pourquoi c'est important : Citation obligatoire (canon) · fort impact (1480 citations)
    SCORE 11.76 Mécanisme MUST-CITE Citations : 1480 DOI ↗
  2. #2
    Win-Shwe, T.T.; Fujimaki, H. (2014) · Toxicology Letters
    Pourquoi c'est important : Citation obligatoire (canon) · 260 citations · revue
    SCORE 8.45 Revue MUST-CITE Citations : 260 DOI ↗
  3. #3
    Olah, G.A.; Molnár, Á. (2005) · Wiley
    Pourquoi c'est important : Citation obligatoire (canon) · 340 citations
    SCORE 8.4 Mécanisme MUST-CITE Citations : 340 DOI ↗
  4. #4
    Cesar, R.; Loureiro, C.; Maia, R. (2010) · Catalysis Reviews
    Pourquoi c'est important : Citation obligatoire (canon) · 140 citations
    SCORE 8.05 Industrie MUST-CITE Citations : 140 DOI ↗
  5. #5
    Filley, C.M.; Halliday, W.; Kleinschmidt-DeMasters, B.K. (2007) · Journal of Neuropathology and Experimental Neurology
    Pourquoi c'est important : Citation obligatoire (canon) · 380 citations
    SCORE 7.74 Pharmacologie MUST-CITE Citations : 380 DOI ↗
  6. #6
    Brugnone, F.; Perbellini, L.; Romeo, L.; Bianchin, M.; Tonello, A. (1991) · International Archives of Occupational and Environmental Health
    Pourquoi c'est important : Citation obligatoire (canon) · 120 citations
    SCORE 6.25 Pharmacologie MUST-CITE Citations : 120 DOI ↗
📈 Gradient HPLC — optimiseur (LSS) MODÈLE

Gradient basé sur PubChem XLogP3 + LSS (Snyder et al. 2010, chap. 9).

  • Colonne: C18
  • Tampon: phosphate
  • Débit: 1 mL/min
  • logP: 2.7 (PubChem XLogP3)
  • Rampe: 27% → 95% B, 15 min
  • Temps d'analyse total: 28 min
t (min) %A %B flow (mL/min) Commentaire
0 73 27 1 début (équilibre)
2 73 27 1 fin du palier initial
17 5 95 1 fin de la rampe LSS
22 5 95 1 lavage de la colonne
23 73 27 1 retour à init
28 73 27 1 rééquilibrage
📚 Références scientifiques (Chicago Author-Date)
  1. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley. — Chapter 9 — gradient elution, LSS theory (cited as Snyder et al. 2010 in tool description).
  2. Schoenmakers, Peter J. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier. — Numerical optimization of gradient programs.
  3. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley. — Foundational LSS reference for the %B_init = 5 + 8·logP heuristic implemented here.
  4. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. [DOI ↗] — Modern review of gradient retention models — basis for non-LSS extensions.
  5. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. [DOI ↗]
  6. Dong, Michael W. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793. — Modern UHPLC gradient programming, sub-2 µm scaling rules.
  7. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. [DOI ↗]
  8. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. [DOI ↗] — Reference for orthogonal gradient design (2D-LC second dimension).
  9. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199.
  10. Meyer, Veronika R. 2010. Practical High-Performance Liquid Chromatography. Wiley. — Chapter 7 — practical gradient design with isokratyczny scouting.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. [DOI ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. [DOI ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. [DOI ↗]
  14. Engelhardt, Heinz. 2014. 100 Years of Chromatography. Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531. [DOI ↗]

REST: /wp-json/molgod/v1/hplc/gradient/108-88-3

🌈 Détecteur + longueur d'onde (UV/Vis) 261 nm
ComposéToluene
λmax261 nm
λmin250 nm
εmax (M⁻¹·cm⁻¹)225
Solvant (référence)cyclohexane
λ suggérée261 nm
Détecteur recommandéPDA/DAD
AlternativesUV, MS

Source de données: Pavia 2014, ch. 5

📚 Références scientifiques (Chicago Author-Date) 17 refs

METODA Bibliographie de la méthode

  1. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2017. "Principles of Instrumental Analysis." 7th ed. Cengage Learning. ISBN 978-1-305-57721-3.
  2. Perkampus, Heinz-Helmut. 1992. "UV-VIS Spectroscopy and Its Applications." Springer. ISBN 978-3-642-77479-9. →
  3. Sadek, Paul C.. 2002. "The HPLC Solvent Guide." 2nd ed. Wiley-Interscience. ISBN 978-0-471-41138-4.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. Wiley. ISBN 978-0-470-16754-0. →
  5. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. ISBN 978-1-119-31378-3. →
  6. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." 5th ed. Wiley. ISBN 978-0-470-68218-0.
  7. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 →
  8. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 →
  9. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience. ISBN 978-0-471-68162-4. →
  10. Kim, Sunghwan, et al.. 2023. "PubChem 2023 update." Nucleic Acids Research 51: D1373-D1380 →
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 →
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 →
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 →
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 →

REST: /wp-json/molgod/v1/hplc/detector/108-88-3

📐 Calculateur de symétrie de pic HPLC (USP Tf / As)

Calculez le facteur de traînée USP (T) et l'asymétrie (As) à partir des demi-largeurs du pic. Saisissez a (demi-largeur gauche) et b (demi-largeur droite) mesurées à 5% ou 10% de la hauteur du pic.

📚 Références (Chicago Author-Date)
  1. USP General Chapter <621>. 2024. "Chromatography." United States Pharmacopeial Convention. [link ↗] — Defines USP Tailing Factor T = (a+b)/(2a) measured at 5% peak height.
  2. International Council for Harmonisation (ICH). 2023. "Validation of Analytical Procedures Q2(R2)." ICH Expert Working Group. [link ↗] — Tailing factor is a system suitability parameter (Section 6).
  3. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." Analytical Chemistry 55: 730-737 https://doi.org/10.1021/ac00255a033 [link ↗] — Original asymmetry factor As = b/a at 10% height (Foley & Dorsey 1983).
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." Wiley. https://doi.org/10.1002/9780470508183 [link ↗] — Chapter 2.4 — peak shape diagnostics and remedies.
  5. Dolan, John W.. 2003. "Peak tailing and resolution." LCGC North America 21: 610-614 [link ↗] — How tailing factor degrades effective resolution.
  6. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗] — Modern numerical deconvolution for asymmetric peaks.
  7. Kromidas, Stavros. 2017. "HPLC Made to Measure: A Practical Handbook for Optimization." Wiley-VCH. — Practical Tf and As thresholds for routine QC.
  8. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." Wiley. https://doi.org/10.1002/9781119313793 [link ↗]
  9. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." Wiley.
  10. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." Journal of Chromatography B 877: 2120-2129 https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗]
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗]
📊 Calculateur de résolution et de nombre de plateaux (Rs, N, H)

Calculez la résolution Rs, le nombre de plateaux théoriques N et la HETP (H) pour une paire de pics HPLC. Saisissez les temps de rétention, les largeurs de pic (à 50% ou à la base) et la longueur de la colonne.

📚 Références (Chicago Author-Date)
  1. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. John Wiley & Sons. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗] — Chapter 2 covers resolution, plate count and HETP fundamentals (Snyder et al. 2010).
  2. USP General Chapter <621>. 2024. "Chromatography." USP-NF 2024 ed. United States Pharmacopeial Convention. [link ↗] — Defines Rs >= 1.5 acceptance criterion and N calculation methods.
  3. Dolan, John W.. 2003. "How much resolution is enough?." LCGC North America 21: 350-353 [link ↗] — Practical guidance on Rs targets for routine method development.
  4. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." Chemical Engineering Science 5: 271-289 https://doi.org/10.1016/0009-2509(56)80003-1 [link ↗] — Origin of N = 5.54·(tr/w0.5)² half-height plate count formulation.
  5. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory." Marcel Dekker. ISBN 978-0-8247-1357-7. — Resolution equation Rs = (1/4)·√N·(α-1)/α·k/(1+k) (master equation).
  6. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." Analytical Chemistry 55: 730-737 https://doi.org/10.1021/ac00255a033 [link ↗] — Skewed-peak corrections to apparent N.
  7. Knox, John H.. 1977. "Practical aspects of LC theory." Journal of Chromatographic Science 15: 352-364 https://doi.org/10.1093/chromsci/15.9.352 [link ↗]
  8. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  9. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗]
  10. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." 5th ed. Wiley. ISBN 978-0-470-68218-0.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗]
🧪 Conformité du système — calculateur en direct (USP <621>)

Saisissez les données de 5-6 injections (aires, tr, traînée, plateaux) — le calculateur calcule le %RSD, les moyennes et vérifie la conformité à l'USP <621>. Vous pouvez coller un CSV (séparé par des virgules) ou modifier des valeurs individuelles.

📚 Références (Chicago Author-Date)
  1. USP General Chapter <621>. 2024. "Chromatography (System Suitability section)." USP-NF 2024 ed. United States Pharmacopeial Convention. [link ↗] — Defines RSD area < 2%, tailing < 2.0, N > 2000 acceptance criteria.
  2. International Council for Harmonisation (ICH). 2023. "Validation of Analytical Procedures Q2(R2)." ICH Expert Working Group. [link ↗] — Section 5.4 — system suitability is part of method validation.
  3. US Food and Drug Administration (FDA). 2018. "Reviewer Guidance: Validation of Chromatographic Methods." US Food and Drug Administration. [link ↗] — CDER reviewer perspective on chromatographic validation expectations.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. Wiley. — Chapter 2 — system suitability fundamentals (RSD, Tf, N).
  5. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." — Robustness vs. system suitability — design-of-experiments framework.
  6. Rozet, Eric, et al.. 2013. "Analysis of recent pharmaceutical regulatory documents on analytical method validation."
  7. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA. [link ↗] — EMA companion guideline with bioanalytical SS criteria.
  8. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. — UHPLC-specific suitability adjustments (n=5 vs. n=6).
  9. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience.
  10. AOAC International. 2016. "Appendix F: Guidelines for Standard Method Performance Requirements." AOAC INTERNATIONAL. [link ↗] — Alternative SS thresholds for food/dietary samples.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial."
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC."
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations."
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography."
📈 Prédicteur de spectre UV-VIS (200-400 nm) λmax 261 nm MolGod_UVVIS_1
0%25%50%75%100%200250300350400261 nmA = ε·c·lA / Aₘₐₓ (%)
ComposéToluene
λmax261 nm
λmin250 nm
εmax (M⁻¹·cm⁻¹)225
Solvant (requête)water
Solvant (référence)cyclohexane
Concentration (M)1e-4
Longueur du trajet optique (cm)1
FWHM de la courbe22 nm

Modèle : courbe de Gauss centrée sur λmax avec mise à l'échelle selon la loi de Beer-Lambert A = ε · c · l. Transmittance T = 10^(-A) · 100%.

📚 Références scientifiques (Chicago Author-Date)
  1. Liu W; Xin S; Wang X; Zhang Y; Dai W; Li H. 2026. "Enhanced toluene catalytic oxidation over Ag-Cu co-modified Mn(2)O(3): the crucial roles of surface structure reconstruction process." Environmental research. https://doi.org/10.1016/j.envres.2026.124120. [DOI]
  2. Ben Attia T; Gannouni N; Galai S; Mhamdi A. 2025. "[Synergistic Effect of Noise and Toluene Upon Hematological Alterations, Pulmonary Oxidative Stress and Inflammation]." La Tunisie medicale. https://doi.org/10.62438/tunismed.v103i10.5718. [DOI]
  3. Zhou W; Feng F; Zhang J; Cao S; Zhou Y; Li Y. 2025. "pH-Sensitive Porphyrin Metal-Organic Frameworks for Controlled Delivery of Para-Toluenesulfonamide and Photodynamic Cancer Therapy." Drug design, development and therapy. https://doi.org/10.2147/DDDT.S504891. [DOI]
  4. Wei Z; Ni W; Mele G; Lü XF; Wang W; Jiang ZY. 2025. "Recyclable magnetic composites prepared by a novel reverse encapsulation reaction to increase benzene rings reactive sites for enhanced removal of 3,4-diaminotoluene: Theoretical prediction with experimental statistics." Environmental research. https://doi.org/10.1016/j.envres.2025.121140. [DOI]
  5. Linstrom, Peter J., and William G. Mallard, eds. 2023. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. [DOI]
  6. Mayerhöfer, Thomas G., Samir Pahlow, and Jürgen Popp. 2020. "The Bouguer-Beer-Lambert Law: Shining Light on the Obscure." ChemPhysChem 21 (18): 2029-2046. [DOI]
  7. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2017. Principles of Instrumental Analysis. 7th ed. Boston: Cengage Learning. ISBN 978-1-305-57721-3.
  8. Lindon, John C., George E. Tranter, and David W. Koppenaal, eds. 2017. "Encyclopedia of Spectroscopy and Spectrometry." 3rd ed. Amsterdam: Academic Press. ISBN 978-0-12-803224-4.
  9. Field, Leslie D., Sev Sternhell, and John R. Kalman. 2013. "Organic Structures from Spectra." 5th ed. Chichester: Wiley. ISBN 978-1-119-96582-6.
  10. Reusch, William. 2013. "Virtual Textbook of Organic Chemistry: Spectroscopy." East Lansing, MI: Michigan State University.
  11. Lampman, Gary M., Donald L. Pavia, George S. Kriz, and James R. Vyvyan. 2010. "Spectroscopy." 4th ed. Belmont, CA: Cengage Learning. ISBN 978-0-495-88992-9.
  12. Kalsi, P. S. 2010. "Spectroscopy of Organic Compounds." 6th ed. New Delhi: New Age International. ISBN 978-81-224-2032-9.
  13. Williams, Dudley H., and Ian Fleming. 2008. "Spectroscopic Methods in Organic Chemistry." 6th ed. London: McGraw-Hill. ISBN 978-0-07-711559-0.
  14. Sadek, Paul C. 2002. The HPLC Solvent Guide. 2nd ed. Hoboken: Wiley. ISBN 978-0-471-41242-2.
  15. Banwell, Colin N., and Elaine M. McCash. 1994. "Fundamentals of Molecular Spectroscopy." 4th ed. London: McGraw-Hill. ISBN 978-0-07-707976-1.
  16. Perkampus, Heinz-Helmut. 1992. UV-VIS Spectroscopy and Its Applications. Berlin: Springer. https://doi.org/10.1007/978-3-642-77479-9.
  17. Fieser, Louis F. 1949. "Extension of Woodward's Rules for Prediction of Conjugated Diene Absorption." Journal of the American Chemical Society 71 (5): 1854-1857. [DOI]
  18. Woodward, Robert B. 1942. "Structure and the Absorption Spectra of Alpha,Beta-Unsaturated Ketones." Journal of the American Chemical Society 64 (1): 72-75. [DOI]
  19. Beer, August. 1852. "Bestimmung der Absorption des rothen Lichts in farbigen Flüssigkeiten." Annalen der Physik und Chemie 86: 78-88. https://doi.org/10.1002/andp.18521620505.
  20. Lambert, Johann Heinrich. 1760. Photometria. Augsburg: Sumptibus Vidae.
🔍 Confirmation par des sources indépendantes SINGLE λmax = 276 nm (1 sources, ±5 nm)
  • 🗃️ database Kim, Sunghwan, et al. 2023. "PubChem 2023 update." Nucleic Acids Research 51 (D1): D1373-D1380. https://doi.org/10.1093/nar/gkac956. UV spectrum data for CAS 108-88-3 sourced from Hazardous Substances Data Bank (HSDB). PubChem CID: 1140. Accessed 2026. λ=276 nm
  • 🔬 peer-reviewed Khan, Sulaiman, Newport, David, Le Calvé, Stéphane. 2019. "Development of a Toluene Detector Based on Deep UV Absorption Spectrophotometry Using Glass and Aluminum Capillary Tube Gas Cells with a LED Source." Micromachines 10 (3): 193. https://doi.org/10.3390/mi10030193. [DOI]
  • 📚 textbook Anonymous. 1989. "Some Applications of Uv and Vis Spectrophotometry." Studies in Analytical Chemistry: 260-303. https://doi.org/10.1016/b978-0-444-98882-9.50012-8. [DOI]
  • 📚 textbook Anonymous. 1989. "Basis of Spectrophotometry in the Uv and Vis Regions." Studies in Analytical Chemistry: 13-46. https://doi.org/10.1016/b978-0-444-98882-9.50005-0. [DOI]

REST: /wp-json/molgod/v1/spectra/uv-vis/108-88-3?solvent=water&path_length_cm=1

☣️ Toxicité (LD50 / LC50) GHS Cat. 5 — Très faibleMolGod_LD50_1
LD50
5000 mg/kg
Gatunek / droga
Rat / doustnie
Klasyfikacja
Slightly toxic
Skala GHS (Acute Toxicity, oral, mg/kg bw):
Cat 1 (≤5)
Cat 2 (5–50)
Cat 3 (50–300)
Cat 4 (300–2000)
Cat 5 (2000–5000)

Source : RTECS XS5250000; U.S. EPA IRIS Toluene 2005 (2005). CAS 108-88-3.

Les données DL50/CL50 sont fournies à titre indicatif uniquement ; elles ne remplacent ni la fiche de données de sécurité (FDS) ni l'évaluation d'un expert toxicologue. Classification GHS pour la voie orale (mg/kg pc) selon UN GHS, 10e rév. 2023, Annexe 1 §3.1.1.

Bibliographie (Chicago)
  • Hodge, Harold C., and James H. Sterner. 1949. "Tabulation of toxicity classes." American Industrial Hygiene Association Quarterly 10 (4): 93-96.
  • U.S. EPA. 2024. "ChemView." https://chemview.epa.gov/.
  • United Nations. 2023. "Globally Harmonized System of Classification and Labelling of Chemicals (GHS)." 10th rev. ed. New York: UN.
  • Lipnick, Robert L., et al. 1995. "Comparison of the up-and-down, conventional LD50, and fixed-dose acute toxicity procedures." Food and Chemical Toxicology 33 (3): 223-231.
  • ATSDR. 2024. "Toxicological Profiles." Agency for Toxic Substances and Disease Registry. https://www.atsdr.cdc.gov/.
  • Hayes, Wallace, and Claire L. Kruger, eds. 2014. "Hayes' Principles and Methods of Toxicology." 6th ed. CRC Press.
  • Lewis, Richard J. 2012. "Sax's Dangerous Properties of Industrial Materials." 12th ed. Wiley.
  • IARC. 2024. "Monographs on the Evaluation of Carcinogenic Risks to Humans." International Agency for Research on Cancer (per kryteria klasyfikacji rakotwórczości IARC Group 1/2A/2B).
  • Pohanish, Richard P. 2017. "Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens." 7th ed. Elsevier.
  • Bingham, Eula, Barbara Cohrssen, and Charles H. Powell, eds. 2012. "Patty's Toxicology." 6th ed. Wiley.
  • WHO. 2023. "Recommended Classification of Pesticides by Hazard." World Health Organization (zgodne z UN GHS Annex 1 §3.1.1).
🧪 Voies de synthèse classiques1 historyczna trasaMolGod_SYNTH_2

Voies de synthèse vérifiées historiquement. Citations au style Chicago auteur-date.

Voie 1 : Catalytic reforming of naphtha (2004)
Réaction nommée : Catalytic reforming (Platforming)
Produits de départ : C6-C8 naphtha cut from crude oil distillation
Conditions : 500 C, 5-30 atm; Pt/Re/Al2O3 (UOP Platforming); H2 cofeed; aromatics extraction (Sulfolane)
Rendement : 60.0 %
Antos, George J., and Abdullah M. Aitani, eds. 2004. Catalytic Naphtha Reforming. 2nd ed. New York: Marcel Dekker.
Bibliographie générale (Chicago) :
  • March, Jerry, and Michael B. Smith. 2020. "March's Advanced Organic Chemistry: Reactions, Mechanisms, and Structure." 8th ed. Wiley.
  • Carey, Francis A., and Richard J. Sundberg. 2007. "Advanced Organic Chemistry, Part B: Reactions and Synthesis." 5th ed. Springer.
  • Corey, E. J., and Xue-Min Cheng. 1995. "The Logic of Chemical Synthesis." Wiley.
  • Greene, Theodora W., and Peter G. M. Wuts. 2014. "Greene's Protective Groups in Organic Synthesis." 5th ed. Wiley.
  • Smith, Michael B. 2020. "Organic Synthesis." 4th ed. Academic Press.
  • Carey, Francis A., and Richard J. Sundberg. 2007. "Advanced Organic Chemistry, Part A: Structure and Mechanisms." 5th ed. New York: Springer.
  • Anslyn, Eric V., and Dennis A. Dougherty. 2006. Modern Physical Organic Chemistry. Sausalito, CA: University Science Books.
  • Bretherick, Leslie. 1990. Bretherick's Handbook of Reactive Chemical Hazards. 4th ed. London: Butterworths.
  • Urben, Peter, ed. 2017. Bretherick's Handbook of Reactive Chemical Hazards. 8th ed. Oxford: Butterworth-Heinemann.
  • Yoshida, Tadao, Yusaku Iwata, Hiroshi Itoh, and Mitsuru Arai. 2009. Safe Storage of Reactive Chemicals. New York: Plenum Press.
  • Mortimer, Charles E. 2005. Chemistry: A Conceptual Approach. 9th ed. Belmont, CA: Wadsworth.
  • Engel, Thomas, and Philip Reid. 2013. Physical Chemistry. 3rd ed. Boston: Pearson.
  • Steinfeld, Jeffrey I., Joseph S. Francisco, and William L. Hase. 1998. Chemical Kinetics and Dynamics. 2nd ed. Upper Saddle River, NJ: Prentice Hall.
  • Houston, Paul L. 2001. Chemical Kinetics and Reaction Dynamics. New York: McGraw-Hill.
  • Eyring, Henry. 1935. "The Activated Complex in Chemical Reactions." Journal of Chemical Physics 3 (2): 107–115. https://doi.org/10.1063/1.1749604.
  • Kresge, A. Jerry. 2001. "Reaction kinetics in 100-year-old laboratories." Chemical Society Reviews 30 (4): 197–200. https://doi.org/10.1039/B100445F.
  • Brönsted, J. N. 1929. "Acid and Basic Catalysis." Chemical Reviews 5 (3): 231–338. https://doi.org/10.1021/cr60019a001.
  • Larock, Richard C. 2018. Comprehensive Organic Transformations: A Guide to Functional Group Preparations. 3rd ed. Hoboken, NJ: John Wiley & Sons.
  • Mundy, Bradford P., Michael G. Ellerd, and Frank G. Favaloro Jr. 2005. Name Reactions and Reagents in Organic Synthesis. 2nd ed. Hoboken, NJ: Wiley-Interscience.
  • Li, Jie Jack. 2014. Name Reactions: A Collection of Detailed Mechanisms and Synthetic Applications. 5th ed. Heidelberg: Springer.
  • Kürti, László, and Barbara Czakó. 2005. Strategic Applications of Named Reactions in Organic Synthesis. Burlington, MA: Elsevier Academic Press.
  • Trost, Barry M., and Ian Fleming, eds. 1991. Comprehensive Organic Synthesis: Selectivity, Strategy, and Efficiency in Modern Organic Chemistry. 9 vols. Oxford: Pergamon Press.
  • Ojima, Iwao, ed. 2010. Catalytic Asymmetric Synthesis. 3rd ed. Hoboken, NJ: John Wiley & Sons.
  • Jacobsen, Eric N., Andreas Pfaltz, and Hisashi Yamamoto, eds. 1999. Comprehensive Asymmetric Catalysis. 3 vols. Berlin: Springer.
  • Hartwig, John F. 2010. Organotransition Metal Chemistry: From Bonding to Catalysis. Sausalito, CA: University Science Books.
  • Crabtree, Robert H. 2014. The Organometallic Chemistry of the Transition Metals. 6th ed. Hoboken, NJ: John Wiley & Sons.
  • Negishi, Ei-ichi, ed. 2002. Handbook of Organopalladium Chemistry for Organic Synthesis. 2 vols. New York: Wiley-Interscience.
  • de Meijere, Armin, and François Diederich, eds. 2004. Metal-Catalyzed Cross-Coupling Reactions. 2nd ed. 2 vols. Weinheim: Wiley-VCH.
  • Berkessel, Albrecht, and Harald Gröger. 2005. Asymmetric Organocatalysis: From Biomimetic Concepts to Applications in Asymmetric Synthesis. Weinheim: Wiley-VCH.
  • Dalko, Peter I., ed. 2007. Enantioselective Organocatalysis: Reactions and Experimental Procedures. Weinheim: Wiley-VCH.
  • List, Benjamin, Richard A. Lerner, and Carlos F. Barbas III. 2000. "Proline-catalyzed direct asymmetric aldol reactions." Journal of the American Chemical Society 122 (10): 2395–2396. https://doi.org/10.1021/ja994280y.
  • MacMillan, David W. C. 2008. "The advent and development of organocatalysis." Nature 455 (7211): 304–308. https://doi.org/10.1038/nature07367.
  • Noyori, Ryōji. 2002. "Asymmetric catalysis: science and opportunities (Nobel lecture)." Angewandte Chemie International Edition 41 (12): 2008–2022. https://doi.org/10.1002/1521-3773(20020617)41:12<2008::AID-ANIE2008>3.0.CO;2-4.
  • Sharpless, K. Barry. 2002. "Searching for new reactivity (Nobel lecture)." Angewandte Chemie International Edition 41 (12): 2024–2032. https://doi.org/10.1002/1521-3773(20020617)41:12<2024::AID-ANIE2024>3.0.CO;2-O.
  • Knowles, William S. 2002. "Asymmetric hydrogenations (Nobel lecture)." Angewandte Chemie International Edition 41 (12): 1998–2007. https://doi.org/10.1002/1521-3773(20020617)41:12<1998::AID-ANIE1998>3.0.CO;2-8.
  • Grubbs, Robert H. 2006. "Olefin-metathesis catalysts for the preparation of molecules and materials (Nobel lecture)." Angewandte Chemie International Edition 45 (23): 3760–3765. https://doi.org/10.1002/anie.200600680.
  • Schrock, Richard R. 2006. "Multiple metal-carbon bonds for catalytic metathesis reactions (Nobel lecture)." Angewandte Chemie International Edition 45 (23): 3748–3759. https://doi.org/10.1002/anie.200600085.
  • Suzuki, Akira. 2011. "Cross-coupling reactions of organoboranes: an easy way to construct C-C bonds (Nobel lecture)." Angewandte Chemie International Edition 50 (30): 6722–6737. https://doi.org/10.1002/anie.201101379.
  • Negishi, Ei-ichi. 2011. "Magical power of transition metals: past, present, and future (Nobel lecture)." Angewandte Chemie International Edition 50 (30): 6738–6764. https://doi.org/10.1002/anie.201101380.
  • List, Benjamin, and David W. C. MacMillan. 2022. "Asymmetric organocatalysis (Nobel lecture)." Angewandte Chemie International Edition 61 (38): e202205927. https://doi.org/10.1002/anie.202205927.
  • Bertozzi, Carolyn R., Morten Meldal, and K. Barry Sharpless. 2023. "Click chemistry and bioorthogonal chemistry (Nobel lectures)." Angewandte Chemie International Edition 62 (16): e202300332. https://doi.org/10.1002/anie.202300332.
  • Weissermel, Klaus, and Hans-Jürgen Arpe. 2003. Industrial Organic Chemistry. 4th ed. Weinheim: Wiley-VCH.
  • Wittcoff, Harold A., Bryan G. Reuben, and Jeffrey S. Plotkin. 2013. Industrial Organic Chemicals. 3rd ed. Hoboken, NJ: John Wiley & Sons.
  • Appl, Max. 2006. "Ammonia, 2. Production Processes." In Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. https://doi.org/10.1002/14356007.o02_o11.
  • Thiemann, Michael, Erich Scheibler, and Karl Wilhelm Wiegand. 2000. "Nitric Acid, Nitrous Acid, and Nitrogen Oxides." In Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. https://doi.org/10.1002/14356007.a17_293.
  • Hocking, Martin B. 2005. Handbook of Chemical Technology and Pollution Control. 3rd ed. Burlington, MA: Academic Press.
  • Corey, E. J., and László Kürti. 2010. Enantioselective Chemical Synthesis: Methods, Logic, and Practice. Direct Book Publishing.
  • Nicolaou, K. C., and E. J. Sorensen. 1996. Classics in Total Synthesis: Targets, Strategies, Methods. Weinheim: VCH.
  • Nicolaou, K. C., and Jason S. Chen. 2011. Classics in Total Synthesis III: Further Targets, Strategies, Methods. Weinheim: Wiley-VCH.
  • House, Herbert O. 1972. Modern Synthetic Reactions. 2nd ed. Menlo Park, CA: W. A. Benjamin.
  • Organic Syntheses, Inc. 2024. "Organic Syntheses Collective Volumes 1–10 (1932–2004) and Annual Volumes 1–100 (1922–2024)." Hoboken, NJ: Wiley. https://www.orgsyn.org/.
  • Paquette, Leo A., David Crich, Philip L. Fuchs, Gary A. Molander, and Andre B. Charette, eds. 2009. Encyclopedia of Reagents for Organic Synthesis (e-EROS). 2nd ed. Hoboken, NJ: Wiley. https://onlinelibrary.wiley.com/doi/book/10.1002/047084289X.
Bibliographie étendue — 4 sources (PubMed/CrossRef/EuropePMC)
  • PUBLiu W; Xin S; Wang X; Zhang Y; Dai W; Li H. 2026. "Enhanced toluene catalytic oxidation over Ag-Cu co-modified Mn(2)O(3): the crucial roles of surface structure reconstruction process." Environmental research. https://doi.org/10.1016/j.envres.2026.124120.
  • PUBBen Attia T; Gannouni N; Galai S; Mhamdi A. 2025. "[Synergistic Effect of Noise and Toluene Upon Hematological Alterations, Pulmonary Oxidative Stress and Inflammation]." La Tunisie medicale. https://doi.org/10.62438/tunismed.v103i10.5718.
  • PUBZhou W; Feng F; Zhang J; Cao S; Zhou Y; Li Y. 2025. "pH-Sensitive Porphyrin Metal-Organic Frameworks for Controlled Delivery of Para-Toluenesulfonamide and Photodynamic Cancer Therapy." Drug design, development and therapy. https://doi.org/10.2147/DDDT.S504891.
  • PUBWei Z; Ni W; Mele G; Lü XF; Wang W; Jiang ZY. 2025. "Recyclable magnetic composites prepared by a novel reverse encapsulation reaction to increase benzene rings reactive sites for enhanced removal of 3,4-diaminotoluene: Theoretical prediction with experimental statistics." Environmental research. https://doi.org/10.1016/j.envres.2025.121140.
📤 Intégrez cette molécule sur votre site

Vous avez un blog, un forum ou un service scientifique ? Intégrez la molécule 3D interactive sur votre site — chacun de vos lecteurs la verra, avec en dessous un lien vers notre boutique où il peut acheter le réactif.

🔗 Code HTML iframe (le plus simple — fonctionne partout)

Copiez et collez dans l'éditeur HTML de votre site :

Ajustez width et height à votre mise en page.

⚙ WordPress Shortcode (pour d'autres boutiques avec MOL-GOD)

🌐 Lien direct (pour e-mails, chats, LinkedIn, Twitter)

LinkedIn Twitter/X Facebook
QR code CAS 108-88-3

📱 QR code (pour l'impression sur flyers / étiquettes / catalogues)

Placez-le dans un catalogue de produits, sur une étiquette de flacon ou un flyer. Le client le scanne — il voit la molécule 3D sur son téléphone, avec un lien vers votre boutique.

⬇ Télécharger le PNG

🖼 Open Graph image (pour les balises meta des réseaux sociaux)

En partageant le lien, Facebook/LinkedIn/Discord récupérera automatiquement l'aperçu de l'image :

Preview
📋 Licence : L'intégration conserve un lien retour vers DH Scientific (requis — la boutique est la source des données). Les données chimiques proviennent de PubChem (CC0 — domaine public). L'intégration est GRATUITE pour un usage éducatif, commercial et de loisir.
📚 RÉFÉRENCES (Bibliographie agrégée, Chicago Author-Date) 108 éléments

Toutes les sources scientifiques citées dans les accordéons ci-dessus pour le CAS 108-88-3. Format : Chicago Manual of Style, 17e éd., système Auteur-Date.

🗄️ Bases de données scientifiques

  1. NIST. 2026. NIST Chemistry WebBook: CAS 108-88-3. Gaithersburg, MD: National Institute of Standards and Technology. https://webbook.nist.gov/cgi/cbook.cgi?ID=108-88-3. (Accessed 2026-11-12.)
  2. AIST. 2026. Spectral Database for Organic Compounds (SDBS): CAS 108-88-3. Tsukuba, Japan: National Institute of Advanced Industrial Science and Technology. https://sdbs.db.aist.go.jp/. (Accessed 2026-11-12.)
  3. PubChem. 2026. PubChem Compound Summary: CAS 108-88-3. Bethesda, MD: National Center for Biotechnology Information (NCBI), National Library of Medicine. https://pubchem.ncbi.nlm.nih.gov/#query=108-88-3. (Accessed 2026-11-12.)
  4. ECHA. 2026. C&L Inventory and REACH Registration: CAS 108-88-3. Helsinki: European Chemicals Agency. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp. (Accessed 2026-11-12.)

📐 Normes / Lignes directrices

  1. ICH. 2026. "ICH Harmonised Guideline: CAS 108-88-3." Geneva: International Council for Harmonisation. https://database.ich.org/sites/default/files/Q1A%28R2%29%20Guideline.pdf. (Accessed 2026-11-12.)
  2. National Fire Protection Association (NFPA). 2024. "NFPA 30: Flammable and Combustible Liquids Code." NFPA, Quincy, MA. https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=30.
  3. Occupational Safety and Health Administration (OSHA). 2023. "29 CFR 1910.106 — Flammable Liquids." U.S. Department of Labor, Federal Register. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.106.
  4. European Chemicals Agency (ECHA). 2024. "Annex VI to Regulation (EC) No 1272/2008 (CLP) — Harmonised Classification and Labelling." ECHA, Helsinki / Official Journal of the European Union. https://echa.europa.eu/regulations/clp/clp-classification.
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=205:110:::::FSP_PROJECT,FSP_ORG_ID:38536,6080&cs=1B0DAA8B85DF42E4A2C70E5D71F0BFA32.
  6. European Committee for Standardization (CEN). 2001. "EN 166:2001 — Personal eye-protection — Specifications." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:6541&cs=1F1A4E0A78C4DB6A28DBE2E8C29D89DCF.
  7. European Committee for Standardization (CEN). 2009. "EN 14605:2005+A1:2009 — Protective clothing against liquid chemicals — Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:21581&cs=1A04A2D3C7CC58E9E6CB58D55F7EBFB7E.
  8. National Institute for Occupational Safety and Health (NIOSH). 2017. "Recommendations for Chemical Protective Clothing: A Companion to the NIOSH Pocket Guide." U.S. Department of Health & Human Services / CDC. https://www.cdc.gov/niosh/ncpc/default.html.
  9. Occupational Safety and Health Administration (OSHA). 2011. "Personal Protective Equipment — General requirements." U.S. Department of Labor — 29 CFR 1910.132. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.132.

📖 Livres

  1. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook, 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/Hansen-Solubility-Parameters-A-Users-Handbook/Hansen/p/book/9780849372483.
  2. Barton, Allan F. M. 1991. CRC Handbook of Solubility Parameters and Other Cohesion Parameters: 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/CRC-Handbook-of-Solubility-Parameters-and-Other-Cohesion-Parameters/Barton/p/book/9780849301766.
  3. Connors, Kenneth A., Gordon L. Amidon, and Valentino J. Stella. 1986. Chemical Stability of Pharmaceuticals: A Handbook for Pharmacists, 2nd ed.. New York: Wiley. https://doi.org/10.1002/0471734683.
  4. Rumble, John R., ed. 2019. CRC Handbook of Chemistry and Physics: 100th Edition. Boca Raton, FL: CRC Press. https://hbcp.chemnetbase.com/.
  5. Urben, Peter G. 2017. Bretherick's Handbook of Reactive Chemical Hazards, 8th Edition. Academic Press / Elsevier, Oxford. https://www.sciencedirect.com/book/9780081010594.

📘 Monographies

  1. IARC. 2026. IARC Monographs on the Identification of Carcinogenic Hazards to Humans: CAS 108-88-3. Lyon, France: International Agency for Research on Cancer, World Health Organization. https://monographs.iarc.who.int/list-of-classifications/. (Accessed 2026-11-12.)

📄 Articles scientifiques (évalués par les pairs)

  1. Stefanis, Emmanuel, and Costas Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." International Journal of Thermophysics 29: 568-585. https://doi.org/10.1007/s10765-008-0415-z.
  2. Stoll, Vincent S., and John S. Blanchard. 1990. "Buffers: Principles and Practice: In Methods in Enzymology, vol. 182." San Diego: Academic Press. https://doi.org/10.1016/0076-6879(90)82008-P.

🌐 Sites web

  1. ECHA. 2023. "Guidance on the Application of the CLP Criteria." European Chemicals Agency. https://echa.europa.eu/guidance-documents/guidance-on-clp.
  2. European Parliament. 2006. "Regulation (EC) No 1907/2006 (REACH)." Official Journal of the European Union L 396: 1–849.
  3. ECHA. 2023. "Candidate List of Substances of Very High Concern for Authorisation." European Chemicals Agency. https://echa.europa.eu/candidate-list-table.
  4. European Parliament. 2008. "Regulation (EC) No 1272/2008 on Classification, Labelling and Packaging of Substances and Mixtures (CLP)." Official Journal of the European Union L 353: 1–1355.
  5. ECHA. 2017. "Guidance on the Compilation of Safety Data Sheets." Version 3.1. European Chemicals Agency. ECHA-17-G-01-EN. https://echa.europa.eu/documents/10162/23047722/sds_en.pdf.
  6. ECHA. 2022. "Restrictions Under REACH — Annex XVII." European Chemicals Agency. https://echa.europa.eu/substances-restricted-under-reach.
  7. United Nations. 2021. Globally Harmonized System of Classification and Labelling of Chemicals (GHS). 9th revised ed. ST/SG/AC.10/30/Rev.9. New York and Geneva: United Nations. https://unece.org/ghs-rev9-2021.
  8. ECHA. 2020. "Understanding REACH." European Chemicals Agency. https://echa.europa.eu/regulations/reach/understanding-reach.
  9. Reid, Prausnitz, Poling 4th ed. (1987). 2026. "Reid, Prausnitz, Poling 4th ed. (1987): CAS 108-88-3." (Accessed 2026-11-12.)
  10. U.S. OSHA. 2026. "Occupational Safety and Health Guidance: CAS 108-88-3." Washington, DC: U.S. Occupational Safety and Health Administration. https://www.osha.gov/hazwoper. (Accessed 2026-11-12.)
  11. National Fire Protection Association (2018) — NFPA 472: Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents https://www.nfpa.org/codes-and-standards/nfpa-472.
  12. European Union. 2026. "EUR-Lex Legal Database: CAS 108-88-3." Luxembourg: Publications Office of the European Union. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex:32012L0018. (Accessed 2026-11-12.)
  13. U.S. National Institute for Occupational Safety and Health (2024) — NIOSH Pocket Guide to Chemical Hazards https://www.cdc.gov/niosh/npg/.
  14. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley.
  15. Schoenmakers, Peter J.. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier.
  16. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley.
  17. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. https://doi.org/10.1016/j.chroma.2008.10.005.
  18. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094.
  19. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793.
  20. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. https://doi.org/10.1002/jssc.200700026.
  21. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199. https://www.chromatographyonline.com/view/when-modify-method-conditions.
  22. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. Wiley.
  23. Engelhardt, Heinz. 2014. 100 Years of Chromatography. Wiley-VCH.
  24. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531. https://doi.org/10.1021/ac101742z.
  25. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." https://doi.org/10.1016/0009-2509(56)80003-1.
  26. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory." Marcel Dekker.
  27. Poppe, Hans. 1997. "Some reflections on speed and efficiency of modern chromatographic methods." https://doi.org/10.1016/S0021-9673(97)00376-2.
  28. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." https://doi.org/10.1002/jssc.200700026.
  29. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." https://doi.org/10.1016/j.chroma.2008.11.094.
  30. Knox, John H.. 1977. "Practical aspects of LC theory." https://doi.org/10.1093/chromsci/15.9.352.
  31. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. "Practical HPLC Method Development." Wiley.
  32. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." https://doi.org/10.1021/ac101742z.
  33. Sadek, Paul C.. 2002. "The HPLC Solvent Guide." Wiley-Interscience.
  34. Snyder, L. R.. 1978. "Classification of the solvent properties of common liquids." https://doi.org/10.1093/chromsci/16.6.223.
  35. Reichardt, Christian, and Thomas Welton. 2010. "Solvents and Solvent Effects in Organic Chemistry." Wiley-VCH.
  36. Vailaya, Anant, and Csaba Horváth. 1998. "Retention thermodynamics in hydrophobic interaction chromatography." https://doi.org/10.1021/ie980212h.
  37. Krstulović, Andrea M., and Phyllis R. Brown. 1981. "Reversed-phase High-Performance Liquid Chromatography." Wiley.
  38. Boysen, Reinhard I., and Milton T. W. Hearn. 2009. "Multi-modal HPLC of proteins." https://doi.org/10.1093/chromsci/47.8.645.
  39. USP General Chapter <621>. 2024. "Chromatography." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  40. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." https://doi.org/10.1021/ac00255a033.
  41. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." Wiley. https://doi.org/10.1002/9780470508183.
  42. Dolan, John W.. 2003. "Peak tailing and resolution." https://www.chromatographyonline.com/view/peak-tailing-and-resolution.
  43. Kromidas, Stavros. 2017. "HPLC Made to Measure: A Practical Handbook for Optimization." Wiley-VCH.
  44. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." https://doi.org/10.1016/j.jchromb.2008.10.052.
  45. United States Pharmacopeial Convention. 2024. "USP <621> Chromatography." In United States Pharmacopeia and National Formulary, USP 47-NF 42. Rockville, MD: USP. https://www.uspnf.com/.
  46. European Pharmacopoeia Commission. 2024. "2.2.46 Chromatographic Separation Techniques." In European Pharmacopoeia, 11th ed. Strasbourg: Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  47. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories." Geneva: ISO. https://www.iso.org/standard/66912.html.
  48. Kolthoff, Izaak Maurits, and Philip J. Elving, eds. 1978. Treatise on Analytical Chemistry, Part I: Theory and Practice. 2nd ed. New York: Wiley-Interscience.
  49. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2018. Principles of Instrumental Analysis. 7th ed. Boston: Cengage Learning.
  50. Christian, Gary D., Purnendu K. Dasgupta, and Kevin A. Schug. 2014. Analytical Chemistry. 7th ed. Hoboken, NJ: Wiley.
  51. EURACHEM/CITAC. 2012. "Quantifying Uncertainty in Analytical Measurement." 3rd ed. EURACHEM/CITAC Guide CG 4. https://www.eurachem.org/images/stories/Guides/pdf/QUAM2012_P1.pdf.
  52. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." John Wiley & Sons. https://doi.org/10.1002/9780470508183.
  53. Dolan, John W.. 2003. "How much resolution is enough?." https://www.chromatographyonline.com/view/how-much-resolution-enough.
  54. USP General Chapter <621>. 2024. "Chromatography (System Suitability section)." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  55. U.S. FDA. 2026. "FDA Guidance and Resources: CAS 108-88-3." Silver Spring, MD: U.S. Food and Drug Administration. https://www.fda.gov/media/74954/download. (Accessed 2026-11-12.)
  56. Rozet, Eric, et al.. 2013. "Analysis of recent pharmaceutical regulatory documents on analytical method validation." https://doi.org/10.1016/j.chroma.2007.03.111.
  57. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  58. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience. https://doi.org/10.1002/9780470087954.
  59. AOAC International. 2016. "Appendix F: Guidelines for Standard Method Performance Requirements." AOAC INTERNATIONAL. https://www.aoac.org/wp-content/uploads/2019/08/app_f.pdf.
  60. International Organization for Standardization. 1994. "ISO 5725-2:1994 Accuracy (Trueness and Precision) of Measurement Methods and Results — Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method." Geneva: ISO. https://www.iso.org/standard/11834.html.
  61. Grubbs, Frank E. 1950. "Sample Criteria for Testing Outlying Observations." Annals of Mathematical Statistics 21 (1): 27–58.
  62. Dixon, Wilfrid J. 1950. "Analysis of Extreme Values." Annals of Mathematical Statistics 21 (4): 488–506.
  63. Snedecor, George W., and William G. Cochran. 1989. Statistical Methods. 8th ed. Ames, IA: Iowa State University Press.
  64. Student [William Sealy Gosset]. 1908. "The Probable Error of a Mean." Biometrika 6 (1): 1–25.
  65. International Organization for Standardization. 2005. "ISO 3534-1:2006 Statistics — Vocabulary and Symbols — Part 1: General Statistical Terms and Terms Used in Probability." Geneva: ISO. https://www.iso.org/standard/40145.html.
  66. Thompson, Michael, Stephen L. R. Ellison, and Roger Wood. 2002. "Harmonized Guidelines for Single-Laboratory Validation of Methods of Analysis." Pure and Applied Chemistry 74 (5): 835–855.
  67. United Nations Economic Commission for Europe. 2024. European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR), Applicable as from 1 January 2025 (ECE/TRANS/352). Geneva: UNECE. https://unece.org/transport/dangerous-goods/adr-2025-edition.
  68. International Air Transport Association. 2026. Dangerous Goods Regulations (DGR). 67th ed. Montreal: IATA. https://www.iata.org/en/programs/cargo/dgr/.
  69. International Maritime Organization. 2024. International Maritime Dangerous Goods (IMDG) Code, 2024 Edition (Amendment 42-24). London: IMO. https://www.imo.org/en/OurWork/Safety/Pages/DangerousGoods-default.aspx.
  70. United Nations. 2025. Recommendations on the Transport of Dangerous Goods: Model Regulations (Orange Book). 24th revised ed. ST/SG/AC.10/1/Rev.24. New York and Geneva: United Nations. https://unece.org/transport/dangerous-goods/un-model-regulations.
  71. International Civil Aviation Organization. 2025. Technical Instructions for the Safe Transport of Dangerous Goods by Air (Doc 9284). 2025–2026 ed. Montreal: ICAO. https://www.icao.int/safety/DangerousGoods/Pages/technical-instructions.aspx.
  72. United States Pharmacopeia (USP) Convention. 2024. "USP General Chapter <621> Chromatography." USP. https://www.usp.org/sites/default/files/usp/document/harmonization/gen-chapter/g05_pf_30_4_2004.pdf.
  73. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA Committee for Medicinal Products for Human Use. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  74. Sejm RP. 2026. "Internetowy System Aktow Prawnych (ISAP): CAS 108-88-3." Warszawa: Kancelaria Sejmu Rzeczypospolitej Polskiej. https://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20200000010. (Accessed 2026-11-12.)
  75. Ministerstwo Klimatu i Srodowiska. 2026. "Baza Danych o Odpadach (BDO): CAS 108-88-3." Warszawa: Ministerstwo Klimatu i Srodowiska. https://bdo.mos.gov.pl/. (Accessed 2026-11-12.)
  76. Pohanish, Richard P.. 2017. "Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens." Elsevier.
  77. Lewis, Richard J.. 2012. "Sax's Dangerous Properties of Industrial Materials." Wiley.
  78. NIOSH. 2024. "Pocket Guide to Chemical Hazards." U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/npg/.
  79. United Nations Economic Commission for Europe (UNECE). 2023. "European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." UNECE. https://unece.org/transport/standards/transport/dangerous-goods/adr-2025.
  80. IPCS INCHEM. 2024. "International Programme on Chemical Safety — Waste Management Guidelines." WHO/UNEP/ILO. https://www.inchem.org/.
  81. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories." ISO. https://www.iso.org/standard/66912.html.
  82. World Health Organization. 2010. "WHO Good Manufacturing Practices for Pharmaceutical Products: Main Principles (WHO Technical Report Series No. 957, Annex 3)." WHO Press. https://www.who.int/publications/m/item/trs957-annex3.
  83. European Medicines Agency. 2014. "Guideline on Process Validation for Finished Products — Information and Data to Be Provided EMA/CHMP/CVMP/QWP/BWP/70278/2012." European Medicines Agency. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-process-validation-finished-products-information-data-be-provided-regulatory-submissions-revision-1_en.pdf.
  84. United States Pharmacopeial Convention. 2024. "United States Pharmacopeia and National Formulary, USP 47-NF 42." USP. https://www.uspnf.com/.
  85. European Pharmacopoeia Commission. 2024. "European Pharmacopoeia 11th Edition." Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  86. Pharmaceutical Inspection Co-operation Scheme (PIC/S). 2021. "Guide to Good Manufacturing Practice for Medicinal Products PE 009-15." PIC/S Secretariat, Geneva. https://picscheme.org/en/publications.
  87. International Pharmaceutical Excipients Council (IPEC) and Pharmaceutical Quality Group (PQG). 2017. "Joint IPEC-PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients." IPEC-Americas. https://ipecamericas.org/sites/default/files/IPECPQGGMPGuide2017.pdf.
📥 Télécharger BibTeX📥 Télécharger RISImport dans Zotero/Mendeley/EndNote/Papers.