Toluol — Etikett CAS 108-88-3

Toluol

7,99 €

🔒 Demomodus — dieser Artikel steht nicht zum Verkauf.

Legale Substanz. dhscientific.com ist eine Demonstration der MOL-GOD-Plattform — wir verkaufen nichts und es werden keine Bestellungen ausgeführt. Verbotene Substanzen werden hier automatisch anhand des regulatorischen Kanons blockiert (vgl. z. B. Heptachlor).

Prüfung Ihres Sicherheitsdatenblatts — kostenlos → · Kontakt

MolGod_SDSCARD_1
REACH 2020/878
v54 · 21.07.2026
Category:
🧬 3D-Molekül-Visualisierer
Molekül wird geladen...
3D-Modell Toluen, CAS 108-88-3, Summenformel C₇H₈, molare Masse 92.14 g/mol
Chemische Übersicht: ToluenMolGod_OVERVIEW_1
SummenformelC₇H₈
Molekulargewicht92.14 g/mol
Schmelzpunkt-94.95 °C
Siedepunkt110.63 °C
Dichte0.8669 g/cm³
LogP (Lipophilie)2.73
SMILESCc1ccccc1

Synonyme: Toluene · Methylbenzene

Datenquellen: PubChem (NLM/NIH), Reid, Prausnitz, Poling 4th ed. (1987)
Zuletzt aktualisiert: 2026-11-10

🎓 Badania akademickie: Toluen

#1🎓School of Science📅 2026
Enhanced toluene catalytic oxidation over Ag-Cu co-modified Mn(2)O(3): the crucial roles of surface structure reconstruction process
Liu W; Xin S; Wang X; Zhang Y; Dai W; Li H.
Vollständiger LAB-Bericht →
#2🎓Faculty of Medicine of Tunis📅 2025
[Synergistic Effect of Noise and Toluene Upon Hematological Alterations, Pulmonary Oxidative Stress and Inflammation]
Ben Attia T; Gannouni N; Galai S; Mhamdi A.
Vollständiger LAB-Bericht →

WISSENSCHAFTLICHE FORSCHUNG

[1]PubMed2025
pH-Sensitive Porphyrin Metal-Organic Frameworks for Controlled Delivery of Para-Toluenesulfonamide and Photodynamic Cancer Therapy
Zhou W; Feng F; Zhang J; Cao S; Zhou Y; Li Y. 2025. "pH-Sensitive Porphyrin Metal-Organic Frameworks for Controlled Delivery of Para-Toluenesulfonamide and Photodynamic Cancer Therapy." Drug design, d
Beijing Hospital
Zur vollständigen Studie ↗
[2]PubMed2025
Recyclable magnetic composites prepared by a novel reverse encapsulation reaction to increase benzene rings reactive sites for enhanced…
Wei Z; Ni W; Mele G; Lü XF; Wang W; Jiang ZY. 2025. "Recyclable magnetic composites prepared by a novel reverse encapsulation reaction to increase benzene rings reactive sites for enhanced removal of
Chang'an University
Zur vollständigen Studie ↗
📊 Physikochemische Eigenschaften

Kurzübersicht

Formel: C7H8
MW: 92.14 g/mol
CAS: 108-88-3
Aussehen: Colorless liquid
Geruch: Sweet, pungent, benzene-like odor
Geruch: Sweet, pungent, benzene-like odor

Detaillierte Eigenschaften

Eigenschaft Wert Einheit Bedingungen Quelle
Dichte (ρ) 0.8669 g/cm³ 20 °C (68 °F) Reid, Prausnitz, Poling 4th ed. (1987)
Schmelzpunkt (mp) -94.95 °C (-138.9 °F) 1 atm Reid, Prausnitz, Poling 4th ed. (1987)
Siedepunkt (bp) 231.1 °F at 760 mmHg (NTP, 1992) PubChem (NIH/NLM) ↗
Flammpunkt 40 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Dampfdruck 10 mmHg at 43.5 °F ; 20 mmHg at 65.1 °F; 40 mmHg at 89.2 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Wasserlöslichkeit less than 1 mg/mL at 64 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Viskosität (η) 1.165 mPa-s at -25 °C (-13 °F); 0.778 mPa-s at 0 °C (32 °F); 0.560 mPa-s at 25 °C (77 °F); 0.424 mPa-s at 50 °C (122 °F); 0.333 mPa-s at 75 °C (167 °F); 0.270 mPa-s at 100 °C (212 °F) PubChem (NIH/NLM) ↗
Brechungsindex (nD) 1.4961 20 °C (68 °F), D-line Reid, Prausnitz, Poling 4th ed. (1987)
🔬 Erweiterte Eigenschaften
Oberflächenspannung 27.900 mN/m 20°C
Dielektrizitätskonstante (ε) 2.380 25°C
Wärmekapazität (Cp) 1.700 J/(g·K) 25°C

Chemische Kennungen

SMILES: Cc1ccccc1
InChI: InChI=1S/C7H8/c1-7-5-3-2-4-6-7/h2-6H,1H3
InChIKey: YXFVVABEGXRONW-UHFFFAOYSA-N

Datenquellen: PubChem, NIST Chemistry WebBook, CRC Handbook of Chemistry and Physics (103rd ed.)

Zuletzt aktualisiert: 2026-06-09

Regulatorischer Status der Substanz
Diese Substanz unterliegt regulatorischen Anforderungen: Bewirtschaftung gefährlicher Abfälle (BDO-Register); Transport gefährlicher Güter (ADR/RID/IMDG); Präkursoren / Psychotropika (GIS-Register). Details im Abschnitt "Regulatorischer Status (REACH/ECHA/CLP)" und im SDS. Regulatorische Information — schränkt den Kauf in diesem Shop nicht ein.
🧮 Stöchiometrie-RechnerMolGod_STOICH_1
🔍 Externe IdentifikatorenMolGod_EXTID_1
14 von 16 ID-Systemen88%
DatenbankIdentifikatorAktionen
CAS Registry Number108-88-3Öffnen →
PubChem CID1140Öffnen →
InChIKeyYXFVVABEGXRONW-UHFFFAOYSA-NÖffnen →
InChIInChI=1S/C7H8/c1-7-5-3-2-4-6-7/h2-6H,1H3
SMILESCc1ccccc1
EC Number203-625-9Öffnen →
DrugBankDB11558Öffnen →
KEGG CompoundC01455Öffnen →
HMDBHMDB0034168Öffnen →
ChemSpider1108Öffnen →
MeSH UID (NLM)D014050Öffnen →
UNII (FDA)3FPU23BG52Öffnen →
NSC Number (NCI)406333Öffnen →
WikiData QIDQ15779Öffnen →

Quellen: PubChem (NIH), Wikidata SPARQL, KEGG, ChEMBL (EBI), CompTox CTX (EPA).

📡 Spektroskopie — CAS 108-88-3MolGod_SPECHUB_MAIN
📊 Spektren (NMR, IR, MS, UV-Vis) (1)

Verfügbare Spektrentypen: IR

IR-Spektrum (KBr, 4000-400 cm⁻¹)

440 Datenpunkte · Quelle: NIST WebBook · NIST ↗ · 📥 JCAMP-DX
📋 Peak-Tabelle (Peak Assignment)
Type Position Intensität Zuordnung
IR 450 1239 —
IR 452 1342 —
IR 454 923 —
IR 456 604 —
IR 458 387 —
IR 490 144 —
IR 492 94 —
IR 494 166 —
IR 496 202 —
IR 498 299 —
IR 530 186 —
IR 532 89 —
IR 534 52 —
IR 536 100 —
IR 538 142 —
IR 570 108 —
IR 572 69 —
IR 574 100 —
IR 576 265 —
IR 578 105 —
🎓 Leitfaden zur Spektreninterpretation (für Studierende)
Wie man ein IR-Spektrum liest
  • 3200-3600 cm⁻¹ — O-H-Streckschwingung (breiter Peak = Wasserstoffbrücke)
  • 2850-3000 cm⁻¹ — C-H-Streckschwingung (sp³)
  • 1650-1750 cm⁻¹ — C=O-Streckschwingung (Ketone, Aldehyde, Ester)
  • 1400-1600 cm⁻¹ — Schwingungen des aromatischen Rings
  • 1000-1300 cm⁻¹ — C-O-Streckschwingung (Ether, Alkohole)
  • Keine Absorption = keine funktionelle Gruppe → mit einer Referenz vergleichen

Quellen: LibreTexts ↗, Silverstein (Spectrometric ID) ↗

📚 Wissenschaftliche Referenzen (Chicago Author-Date) (9 Quellen)

📚 Die Buch-Bibliografie wartet auf ihre Erstellung. Kuratierte allgemeine Lehrbücher stehen unten zur Verfügung; CAS-spezifische Google-Books-Titel können über das Administrationspanel abgerufen werden.

  1. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  2. Spectral Database for Organic Structure Determination (SDBS). 2024. National Institute of Advanced Industrial Science and Technology (AIST), Japan. Accessed 2025-01-01. ↗
  3. Ulrich, Eldon L., Hideo Akutsu, John F. Doreleijers, Yoko Harano, Yannis E. Ioannidis, Jundong Lin, Miron Livny, et al. 2008. "BioMagResBank." Nucleic Acids Research 36 (D1): D402–D408. [DOI ↗]
  4. Horai, Hisayuki, Masanori Arita, Shigehiko Kanaya, Yoshito Nihei, Tasuku Ikeda, Kazuhiro Suwa, Yuya Ojima, et al. 2010. "MassBank: A Public Repository for Sharing Mass Spectral Data for Life Sciences." Journal of Mass Spectrometry 45 (7): 703–714. [DOI ↗]
  5. Linstrom, P.J., and W.G. Mallard, eds. 2024. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. ↗
  6. McDonald, M. Shane, Mike McAvoy, and Ajit Bhalerao. 1988. "JCAMP-DX: A Standard Form for Exchange of Infrared Spectra in Computer Readable Form." Applied Spectroscopy 42 (1): 151–162. [DOI ↗]
  7. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
📐 Physikalisch-chemische Eigenschaften (DB) 25 Felder MolGod-Score: Primär
Eigenschaft Wert Einheit Bedingungen Quelle
Schmelzpunkt -94.95 [4][6][11] °C 1 atm Reid, Prausnitz, Poling 4th ed. (1987)
Siedepunkt 110.63 [4][6][11] °C 760 mmHg Reid, Prausnitz, Poling 4th ed. (1987)
Wasserlöslichkeit 0.526 [4] g/L 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Dichte (ρ) 0.8669 [4] g/cm³ 20°C Reid, Prausnitz, Poling 4th ed. (1987)
Brechungsindex (n_D) 1.4961 [4] — 20°C, sodium D Reid, Prausnitz, Poling 4th ed. (1987)
Viskosität (η) 0.560 [4] cP 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Dampfdruck 28.400 [4] mmHg 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Flammpunkt 4.00 [4] °C closed cup Reid, Prausnitz, Poling 4th ed. (1987)
Zündtemperatur 535.00 [4] °C in air Reid, Prausnitz, Poling 4th ed. (1987)
UV λmax 261 [4][2] nm water/MeOH Reid, Prausnitz, Poling 4th ed. (1987)
UV εmax 225 [4][2] M⁻¹·cm⁻¹ at λmax Reid, Prausnitz, Poling 4th ed. (1987)
UV λmax (alt) 208 [4][2] nm cyclohexane (E1 band) Reid, Prausnitz, Poling 4th ed. (1987)
logP (Octanol/Wasser) 2.730 [4][8][9] — 25°C Reid, Prausnitz, Poling 4th ed. (1987)
logD (pH 7) 2.730 [4][8][9] — pH 7.4 Reid, Prausnitz, Poling 4th ed. (1987)
Dielektrizitätskonstante (ε) 2.380 [4] — 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Oberflächenspannung 27.900 [4] mN/m 20°C Reid, Prausnitz, Poling 4th ed. (1987)
Spezifische Wärme (cp) 1.700 [4] J/(g·K) 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Wärmeleitfähigkeit (k) 0.1310 [4] W/(m·K) 25°C Reid, Prausnitz, Poling 4th ed. (1987)
Dipolmoment (μ) 0.360 [4] D gas phase Reid, Prausnitz, Poling 4th ed. (1987)
ΔH Verdampfung 38.060 [4] kJ/mol NBP Reid, Prausnitz, Poling 4th ed. (1987)
ΔH Schmelzen 6.640 [4] kJ/mol at mp Reid, Prausnitz, Poling 4th ed. (1987)
Kritische Temperatur (Tc) 318.60 [4] °C critical point Reid, Prausnitz, Poling 4th ed. (1987)
Kritischer Druck (Pc) 41.100 [4] bar critical point Reid, Prausnitz, Poling 4th ed. (1987)
Azentrischer Faktor (ω) 0.2630 [4] — Pitzer Reid, Prausnitz, Poling 4th ed. (1987)
Ethanol-Löslichkeit miscible [4] g/L 25°C Reid, Prausnitz, Poling 4th ed. (1987)
📚 Wissenschaftliche Referenzen (Chicago Author-Date) (12 Quellen)
  1. Haynes, William M., ed. 2024. CRC Handbook of Chemistry and Physics. 105th ed. Boca Raton: CRC Press/Taylor & Francis. ISBN 978-1-032-55554-4. ↗
  2. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  3. Yaws, Carl L. 2014. The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals. 2nd ed. Oxford: Gulf Professional Publishing.
  4. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
  5. Marrero, J., and R. Gani. 2001. "Group-Contribution Based Estimation of Pure Component Properties." Fluid Phase Equilibria 183–184: 183–208. ↗
  6. Joback, K. G., and R. C. Reid. 1987. "Estimation of Pure-Component Properties from Group-Contributions." Chemical Engineering Communications 57 (1–6): 233–243. ↗
  7. Sangster, J. 1997. Octanol-Water Partition Coefficients: Fundamentals and Physical Chemistry. Chichester: Wiley. ISBN 978-0-471-97397-3.
  8. Mannhold, Raimund, and Han van de Waterbeemd. 2001. "Substructure and Whole Molecule Approaches for Calculating Log P." Journal of Computer-Aided Molecular Design 15 (4): 337–354. ↗
  9. Perrin, Ditlev D., Boyd Dempsey, and E. P. Serjeant. 1981. pKa Prediction for Organic Acids and Bases. London: Chapman and Hall. ISBN 0-412-21090-5.
  10. Constantinou, Leonidas, and Rafiqul Gani. 1994. "New Group Contribution Method for Estimating Properties of Pure Compounds." AIChE Journal 40 (10): 1697–1710. ↗
  11. Ertl, Peter, Bernhard Rohde, and Paul Selzer. 2000. "Fast Calculation of Molecular Polar Surface Area as a Sum of Fragment-Based Contributions and Its Application to the Prediction of Drug Transport Properties." Journal of Medicinal Chemistry 43 (20): 3714–3717. ↗
🔄 Umrechner für Konzentrationseinheiten LIVE MolGod_UNITCONV_1

Geben Sie die Konzentration Toluen in einer beliebigen Einheit ein — der Rest wird automatisch berechnet.

MW: 92.14 g/mol · IUPAC Gold Book ↗

⚗️ Umrechnungsformeln + Zitate (pro Formel)
UmrechnungFormelGenauigkeitQuelle
% (w/v) ↔ molarityc (mol/L) = (% × 10) / MW±0.5% rel. when density ≈ 1.0 g/mLIUPAC (2019)
millimolar ↔ molarc (mol/L) = mM × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
molarity (mol/L)c = n/V = (m/MW)/V±0.1% (depends on MW precision)IUPAC (2019)
parts per million (mg/L) ↔ molarityc (mol/L) = ppm / (1000 × MW); equivalently ppm = mg/L for dilute aqueous±1% (density-independent for dilute solutions)IUPAC (2019)
mg/mL ↔ molarityc (mol/L) = (mg/mL × 1000) / MW / 1000 = mg/mL / MW × 1±0.2%Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
g/L ↔ molarityc (mol/L) = (g/L) / MW±0.1% (depends on MW precision)Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
mmol/L ↔ molarityc (mol/L) = mmol/L × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
Celsius ↔ KelvinT(K) = t(°C) + 273.15±0.01 K (ITS-90 scale)BIPM (Bureau International des Poids et Mesures) (2019)
Celsius ↔ FahrenheitT(°F) = T(°C) × 9/5 + 32±0.1 °FThompson A, Taylor BN (2008)
density-corrected % ↔ molarityc (mol/L) = (%w/w × ρ × 10) / MW, ρ in g/mL±0.1% when ρ known to 3 decimalsCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
📚 Bibliographie (8 autoritative Quellen)
  1. Thompson A, Taylor BN (2008). Guide for the Use of the International System of Units (SI). NIST Special Publication 811 · DOI: 10.6028/NIST.SP.811-2008
    → Primary SI standard for US scientific usage
  2. Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007). Quantities, Units and Symbols in Physical Chemistry — The IUPAC Green Book. RSC Publishing, 3rd ed. · DOI: 10.1039/9781847557889 · ISBN: 978-0-85404-433-7
    → Canonical IUPAC guide for chemistry quantities/units
  3. BIPM (Bureau International des Poids et Mesures) (2019). The International System of Units (SI), 9th edition. BIPM · ↗
    → International SI definitions (incl. redefined kilogram 2019)
  4. ISO/IEC (2022). Quantities and units — Part 1: General. International Organization for Standardization — ISO 80000-1:2022 · ↗
    → General rules for physical quantities and units
  5. ISO/IEC (2019). Quantities and units — Part 9: Physical chemistry and molecular physics. International Organization for Standardization — ISO 80000-9:2019 · ↗
    → Concentration / molality / amount-of-substance conventions
  6. Tiesinga E, Mohr PJ, Newell DB, Taylor BN (2021). CODATA recommended values of the fundamental physical constants: 2018. Rev. Mod. Phys. 93(2):025010 · DOI: 10.1103/RevModPhys.93.025010
    → Avogadro, gas constant, molar volume (2019 SI revision)
  7. IUPAC (2019). Compendium of Chemical Terminology — the IUPAC Gold Book (online). IUPAC · DOI: 10.1351/goldbook
    → Definitions of mass fraction, molality, normality, ppm, activity
  8. Mills IM, Cvitaš T, Homann K, Kallay N, Kuchitsu K (1988). Quantities, Units and Symbols in Physical Chemistry. Blackwell Scientific Publications, 1st ed. · ISBN: 0-632-01773-5
    → Historical predecessor of IUPAC Green Book
🧪 Assistent zur Lösungsvorbereitung WIZARD MolGod_PREP_1
① Konzentration auswählen
② Zielvolumen
③ Lösungsmittel

Berechnungen nach: IUPAC Gold Book ↗, Merck ↗

LösungsmittelkompatibilitätMolGod_SOLV_1

Schätzung auf Basis der Wasserlöslichkeit und des logP. Richtwerte — ersetzen keine experimentellen Untersuchungen.

LösungsmittelVerträglichkeitAnmerkungenReferenzen
Water- SchwachlogP deutet auf Lipophilie hin
EtOH~ MäßigTeilweise Löslichkeit
Acetone~ MäßigTeilweise kompatibel
DCM+ GutDCM — gut für unpolare Verbindungen
DMSO~ MäßigDMSO löst die meisten organischen Verbindungen
THF+ GutTHF — breiter Löslichkeitsbereich
Hexane+ GutHexan — ideal für unpolare Verbindungen
CHCl3+ GutCHCl3 — gut für mäßig polare und unpolare Verbindungen

Datenquellen für logP/Löslichkeit: logP: 2.73

📚 Wissenschaftliche Referenzen für Lösungsmittel (Chicago Author-Date) — zum Aufklappen klicken

Jedes Lösungsmittel ist durch 5 unabhängige wissenschaftliche Quellen belegt (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/GESTIS). Vollständige Zitate unten.

Water · NIST CAS lookup ↗
  1. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  2. International Association for the Properties of Water and Steam (IAPWS). 1997. "Release on the Static Dielectric Constant of Ordinary Water Substance." IAPWS R8-97. [link ↗]
  3. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  4. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. https://doi.org/10.1201/9781420006834. [link ↗]
  5. IFA. n.d. "Water." GESTIS Substance Database. Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung. Accessed April 25, 2026. [link ↗]
EtOH · NIST CAS lookup ↗
  1. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  2. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  3. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. https://doi.org/10.1002/9780470508183. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. https://doi.org/10.1016/B978-0-340-64578-9.X5000-9. [link ↗]
  5. IFA. n.d. "Ethanol." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Acetone · NIST CAS lookup ↗
  1. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. [link ↗]
  5. IFA. n.d. "Acetone." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
DCM · NIST CAS lookup ↗
  1. National Institute of Standards and Technology. n.d. "Methane, dichloro- (CAS 75-09-2)." NIST Chemistry WebBook, SRD 69. Accessed April 25, 2026. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. International Agency for Research on Cancer. 1999. "Dichloromethane." IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 71: 251–315. [link ↗]
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  5. IFA. n.d. "Dichloromethane." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
DMSO · NIST CAS lookup ↗
  1. Wypych, George. 2019. Handbook of Solvents. Volume 1: Properties. 3rd ed. Toronto: ChemTec Publishing. https://doi.org/10.1016/C2018-0-02235-3. [link ↗]
  2. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  3. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  4. National Institute of Standards and Technology. n.d. "Methane, sulfinylbis- (CAS 67-68-5)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  5. IFA. n.d. "Dimethyl sulfoxide." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
THF · NIST CAS lookup ↗
  1. Armarego, Wilfred L. F., and Christina Li Lin Chai. 2009. Purification of Laboratory Chemicals. 6th ed. Oxford: Butterworth-Heinemann. https://doi.org/10.1016/B978-1-85617-567-8.50003-3. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. National Institute of Standards and Technology. n.d. "Furan, tetrahydro- (CAS 109-99-9)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. [link ↗]
  5. IFA. n.d. "Tetrahydrofuran." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Hexane · NIST CAS lookup ↗
  1. National Institute of Standards and Technology. n.d. "Hexane (CAS 110-54-3)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. [link ↗]
  4. Agency for Toxic Substances and Disease Registry. 1999. Toxicological Profile for n-Hexane. Atlanta, GA: U.S. Department of Health and Human Services. [link ↗]
  5. IFA. n.d. "n-Hexane." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
CHCl3 · NIST CAS lookup ↗
  1. International Agency for Research on Cancer. 1999. "Chloroform." IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 73: 131–182. [link ↗]
  2. National Institute of Standards and Technology. n.d. "Methane, trichloro- (CAS 67-66-3)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  3. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  5. IFA. n.d. "Chloroform." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Löslichkeitstheorie (angewendet in der Verträglichkeitsvorhersage):
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. https://doi.org/10.1201/9781420006834 — HSP-Triplett (dD, dP, dH) + Ra-Formel.
  3. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solwatochromia.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  5. PubChem Compound Database — CAS 108-88-3 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Vollständige Bibliografie im Akkordeon REFERENZEN (am Ende der Seite) — Chicago Manual of Style 17th ed., Author-Date.

🔬 Reinheitsprüfungs-Leitfaden Qualitätskontrolle

Überprüfen Sie die Reagenzreinheit mit standardisierten analytischen Methoden. Wählen Sie unten eine Testmethode und geben Sie Ihre Messergebnisse für die automatische Berechnung ein.

🛡️ Sicherheit — CAS 108-88-3MolGod_SAFEHUB_MAIN
Hinweis zu Datenbeschränkungen. Die Sicherheitsinformationen auf dieser Seite dienen nur zur Information und ersetzen kein vollständiges Sicherheitsdatenblatt (SDS). Konsultieren Sie vor der Verwendung des Produkts das aktuelle Sicherheitsdatenblatt des Herstellers sowie die GHS/CLP-Leitlinien. Die CLP-Einstufung bezieht sich auf die reine Bulk-Substanz, nicht auf handelsübliche Zubereitungen.

GHS/CLP-Einstufung — Verordnung (EG) Nr. 1272/2008 + UN GHS Rev. 9 (2021).

⚠️ Gefahr (Danger)
GHS02 — Entzündbar
GHS02 Entzündbar
GHS07 — Reizend / gesundheitsschädlich
GHS07 Reizend / gesundheitsschädlich
GHS08 — Gesundheitsgefahr
GHS08 Gesundheitsgefahr

🚨 Gefahrenhinweise (H)

  • H225 — Flüssigkeit und Dampf leicht entzündbar.
  • H361d — Kann vermutlich das Kind im Mutterleib schädigen.
  • H304 — Kann bei Verschlucken und Eindringen in die Atemwege tödlich sein.
  • H336 — Kann Schläfrigkeit und Benommenheit verursachen.
  • H373 — Kann die Organe schädigen bei längerer oder wiederholter Exposition.
  • H315 — Verursacht Hautreizungen.

🛡 Sicherheitshinweise (P)

  • P201 — Vor Gebrauch besondere Anweisungen einholen.
  • P210 — Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen.
  • P261 — Einatmen von Staub/Rauch/Gas/Nebel/Dampf/Aerosol vermeiden.
  • P280 — Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz tragen.

✓ Harmonisierte Einstufung gemäß Anhang VI der CLP-Verordnung (EG) 1272/2008 (amtliche, verbindliche Einstufung). Indexnummer: 601-021-00-3.

Referenz (Chicago): European Chemicals Agency. "toluene, Index No. 601-021-00-3." In Table 3 of Annex VI to Regulation (EC) No 1272/2008 (CLP Regulation), 23rd Adaptation to Technical Progress. Helsinki: European Chemicals Agency, 2026. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp.

⚠ IARC — Gruppe 3: nicht einstufbar hinsichtlich der Karzinogenität für den Menschen (von IARC bewertet). (Unabhängige Bewertung der Karzinogenitätsnachweise durch IARC/WHO — ergänzt die obige CLP-Einstufung.)
Referenz (Chicago): IARC. 2026. IARC Monographs on the Identification of Carcinogenic Hazards to Humans: CAS 108-88-3. Lyon, France: International Agency for Research on Cancer, World Health Organization. https://monographs.iarc.who.int/list-of-classifications/. (Accessed 2026-11-12.)
Einstufung aus der lokalen MOL-GOD-Liste (Snapshot) — nicht gegen die aktuelle IARC-Liste verifiziert. Überprüfen

Übersetzungen: CLP-Verordnung (EG) 1272/2008, Anhang III und IV. Daten: PubChem/NLM.

📚 Konsolidierte wissenschaftliche Referenzen — Chicago Author-Date 10 Quellen

Referenzen aus allen Safety-Hub-Registerkarten gesammelt. CAS: 108-88-3 · PubChem ↗

  1. Parlament Europejski i Rada UE. 2008. "Rozporządzenie (WE) nr 1272/2008 w sprawie klasyfikacji, oznakowania i pakowania substancji (CLP)." Dz.Urz. UE L 353. [↗] GHS, Vorschriften
  2. United Nations Economic Commission for Europe (UNECE). 2021. "Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Ninth Revised Edition." United Nations, Geneva. [↗] GHS
  3. Goldfrank, Lewis R., Robert S. Hoffman, Mary Ann Howland, et al.. 2019. "Goldfrank's Toxicologic Emergencies, 11th ed.." McGraw-Hill Education, New York. ISBN 978-1-25-985961-8. Pierwsza pomoc, Toksykologia
  4. National Institute for Occupational Safety and Health (NIOSH). 2023. "NIOSH Pocket Guide to Chemical Hazards (DHHS Publ. 2005-149)." U.S. Department of Health and Human Services / CDC, Cincinnati, OH. [↗] Pierwsza pomoc, PPE, Toksykologia
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms." CEN, Brussels. [↗] PPE
  6. UNECE. 2023. "European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." United Nations, Geneva. [↗] Utylizacja, Regulacje
  7. National Fire Protection Association (NFPA). 2022. "NFPA 400 — Hazardous Materials Code." NFPA, Quincy, MA. [↗] Magazynowanie
  8. Urben, P.G. (ed.). 2017. "Bretherick's Handbook of Reactive Chemical Hazards, 8th ed.." Butterworth-Heinemann / Elsevier, Oxford. [↗] Magazynowanie
  9. Ministerstwo Klimatu i Środowiska RP. 2023. "Baza danych o produktach i opakowaniach oraz o gospodarce odpadami (BDO)." Ministerstwo Klimatu i Środowiska, Warszawa. [↗] Utylizacja
  10. International Agency for Research on Cancer (IARC / WHO). 2024. "IARC Monographs on the Identification of Carcinogenic Hazards to Humans — List of Classifications." WHO, Lyon. [↗] Toksykologia

Registerkarten mit eigenen Referenzen (Emergency, PPE, Storage, Waste) enthalten zusätzliche bibliografische Einträge in ihren jeweiligen Abschnitten.

📈 Analytische Statistik (t-Test · RSD · Grubbs · Q-Dixon) ICH Q2

Fügen Sie eine Serie von Messwiederholungen ein (CSV oder eine Zahl pro Zeile). Der Rechner berechnet Mittelwert, Standardabweichung und 95% CI und erkennt Ausreißer (Grubbs + Dixon Q).

Trennzeichen: Komma, Leerzeichen, Tab, Zeilenumbruch. Min. 3 Messungen.
📐 Statistische Formeln
  • x̄ = Σxᵢ / n — arithmetisches Mittel
  • s² = Σ(xᵢ - x̄)² / (n-1) — Stichprobenvarianz
  • s = √s² — Standardabweichung
  • RSD% = (s / x̄) × 100% — relative Standardabweichung
  • CI₉₅ = x̄ ± t(0.05, n-1) × s / √n — Student's t
  • G = |xᵢ - x̄| / s — Grubbs-Test
  • Q = |xsuspect - xnearest| / |xmax - xmin| — Dixon Q-test

Quelle: ICH Q2(R2) Validation of Analytical Procedures · ICH PDF ↗

🧪 Puffer-Rezept-Rechner EINZIGARTIG
Literatur: pKa-Werte aus Goldberg NIST 81 · CRC Handbook 100th ed. · Stoll & Blanchard 1990 (DOI)

Wählen Sie einen Puffer aus der Liste von 20 gängigen Systemen → geben Sie den Ziel-pH-Wert ein → Sie erhalten ein exaktes Rezept mit den einzuwiegenden Massen.

Schritt 1: Puffersystem wählen

📜 Rezeptverlauf (letzte 10)
🚚 Transportklassifizierung (ADR / IATA / IMDG) UN1294
UN-Nummer
UN1294
TOLUENE
Flammable

🛣️ ADR Straßentransport

Klasse:
3
Verpackungsgruppe:
II
Versandbezeichnung:
TOLUENE
Tunnelcode:
(D/E)
Limited Quantity (L):
1
Excepted Quantity:
E2

✈️ IATA Lufttransport

Klasse:
3
Verpackungsanweisungen:
353 / 364
Höchstmenge (PAX):
5 L
Höchstmenge (CAO):
60 L

🚢 IMDG Seetransport

Klasse:
3
EmS Code:
F-E, S-D

Quellen: ADR 2025 ↗ · IATA DGR ↗ · IMDG Code ↗

🔬 HPLC/GC-Methoden (3 Methoden)
📄
The application of untargeted metabolomics coupled with chemometrics for the analysis of agitation effects on the sensory profiles of matcha tea
GC-MSCurrent Research in Food Science202490% ✓OAResearch method (specificity, robustness)
Säule: C7, 6.5 μm
Phase: mobile phase B was acetonitrile
Detektion: MS
Fluss: 2.00 mL/min
Temp.: 20.0 °C
Inj.: 500 μL
Gradient: elution was as followed: 5% B, 0–2 min; 5–13% B, 2–8 min;…
Li S, Tian H, Zhu G, Wei Z. The application of untargeted metabolomics coupled with chemometrics for the analysis of agitation effects on the sensory profiles of matcha tea. Current Research in Food Science. 2024;9:100843. doi:10.1016/j.crfs.2024.100843
🔗 DOI🏠 PMC📚 PubMed📄 PDF
In the study, the effects of agitating parameters (different agitating rates and time) on the aroma and taste profiles of matcha tea were systematically investigated by the combination of untargeted metabolomics and chemometrics. The aroma profiles of matcha tea agitated at low rates (500 rpm) and for 30 s were more richness than that agitated with other parameters by sensory analysis and gas chromatography-ion mobility spectrometry. The key aroma compounds contributed to the sensory differences of matcha tea agitated at different rates and time were analyzed by gas chromatography-mass spectrometry and partial least square-discriminate analysis (PLS-DA), which were further verified by the triangle test. Thereinto, 2,4-decadienal associated with the sweet, brown and seaweed aroma significantly affected the aroma profiles of matcha tea with different agitating rates and time. The levels of bitterness and astringency were also higher in matcha tea with low agitating rates and time by sensory evaluation, which were attributed to the variations of phenolic compounds. Flavonol glycosides, gallic acid and (−)-gallocatechin were determined the key compound to the taste differences of matcha tea with different agitating parameters by the analysis of PLS-DA based on the results of high performance liquid chromatography and the sensory verification. And flavonol glycosides were mainly contributed to the bitterness and astringency, and gallic acid and (−)-gallocatechin influenced the umami and sweetness of matcha tea. Consequently, agitation has the potential to affect the sensory profiles of matcha tea by changing aroma and taste substances.
Matcha teaAgitationSensory panel testFlavor substancePartial least square-discriminate analysis
📄
Peel of Traditional Apple Varieties as a Great Source of Bioactive Compounds: Extraction by Micro-Matrix Solid-Phase Dispersion
HPLC-PDAFoods202088% ✓CC-BYResearch method (specificity, robustness)
Säule: C18, 300 μm
Phase: mobile phase consists of A (water containing 1% formic acid) to B…
Detektion: UV 600 nm
Fluss: 1.00 mL/min
Temp.: 20.0 °C
Gradient: system (Millipore, Bedford, MA, USA) and the formic acid was…
Lončarić A, Matanović K, Ferrer P, Kovač T, Šarkanj B, Skendrović Babojelić M, et al. Peel of Traditional Apple Varieties as a Great Source of Bioactive Compounds: Extraction by Micro-Matrix Solid-Phase Dispersion. Foods. 2020;9:80. doi:10.3390/foods9010080
🔗 DOI🏠 PMC📚 PubMed📄 PDF
Micro matrix solid phase dispersion (micro-MSPD) was optimized by response surface methodology for the extraction of polyphenols from the peel of twelve traditional and eight commercial apple varieties grown in Croatia. The optimized micro-MSPD procedure includes the use of 0.2 g of sample, 0.8 g of dispersant, a 57% solution of methanol in water as the solvent and 5 mL of extract volume. The total polyphenolic index (TPI) and antioxidant activity (AA) were measured by spectrophotometric assays. Eighteen polyphenolic compounds were identified in all investigated apples by HPLC-DAD and LC-(ESI)-MS. The peel of traditional apple varieties had higher contents of all investigated polyphenols. Calculated relative contribution of polyphenol groups indicated non-flavonoids (28.6%) and flavanols (46.2%) as the major contributors to the total polyphenolic content in traditional and commercial apple varieties, respectively. The most abundant polyphenol in traditional apple peel was chlorogenic acid, procyanidin B2 and epicatechin (1143 ± 755 µg/g dw, 954 ± 343 µg/g dw and 560 ± 362 µg/g dw, respectively). The peel of varieties ‘Apistar’, ‘Bobovac’ and ‘Božićnica’ could be highlighted as an important source of polyphenols.
polyphenolsmatrix solid-phase dispersionapple peelexperimental design
📄
Comparative study of volatile and non-volatile flavor substances in squid from multiple origins
HPLCFood Chemistry: X202590% ✓OAResearch method (specificity, robustness)
Säule: C5, 1 μm
Phase: mobile phases were mixed buffer of sodium citrate and citric acid (pH 3
Detektion: MS
Fluss: 2.00 mL/min
Temp.: 60.0 °C
Inj.: 2400 μL
Han M, Jiang X, Gui M, Liang Q, Gu Y, Song X, et al. Comparative study of volatile and non-volatile flavor substances in squid from multiple origins. Food Chemistry: X. 2025;27:102429. doi:10.1016/j.fochx.2025.102429
🔗 DOI🏠 PMC📚 PubMed📄 PDF
This study compared and analyzed the similarities and differences in odor and taste between Japanese flying squid and Equatorial, Indian Ocean, and Peruvian squid. Headspace gas chromatography-ion mobility spectrometry (HS-GC-IMS) and headspace solid-phase microextraction gas chromatography–mass spectrometry (HS-SPME-GC–MS), respectively, identified 52 and 43 volatile compounds, with aldehydes and alcohols being the main volatile substances. Cluster analyses showed that Equatorial squid were closest in odor to Japanese flying squid. A total of 16 free amino acids, 6 flavor nucleotides and 3 organic acids were identified from the four squid species by HPLC. There was no significant difference between Japanese flying squid and Peruvian squid in umami intensity. Hierarchical cluster analysis classified the flavors of the four squids into three categories, that was Equatorial squid and Japanese flying squid, Indian Ocean squid, Peruvian squid, which will provide a reference for raw material substitution of Japanese flying squid.
SquidFlavorDifferent originsTasteVolatile compounds
📈 Methodenvalidierung (ICH Q2)

Keine Validierungsdaten. Kontaktieren Sie den Methodenautor.

Parameter nach: ICH Q2(R2) ↗

📋 Methodenvergleich
Technik Säule Analysenzeit Detektion Mobile Phase Quelle
GC-MS C7 — MS mobile phase B was acetonitrile DOI ↗
HPLC-PDA C18 — UV 600 nm mobile phase consists of A (water containing 1%… DOI ↗
HPLC C5 — MS mobile phases were mixed buffer of sodium citrate… DOI ↗
🔧 Fehlerbehebung HPLC/GC
Breite Peaks / Tailing
Ursachen: Verschlissene Säule, falscher pH der mobilen Phase, Säulenüberladung, Totvolumen
Lösung: Säule austauschen, Puffer-pH prüfen (±0,2), Injektionsvolumen verringern, Verbindungen prüfen
Basisliniendrift
Ursachen: Verunreinigte mobile Phase, Gradientenprobleme, instabile Temperatur
Lösung: Phase entgasen, 0,22 µm filtrieren, Säulentemperatur stabilisieren, System spülen
Kein Peak
Ursachen: Falsche Wellenlänge, Substanz eluiert nicht, thermische Zersetzung, falsche Phase
Lösung: λmax prüfen, Gradient verlängern, Temperatur senken, mobile Phase wechseln
Geisterpeaks (ghost peaks)
Ursachen: Systemverunreinigung, Verschleppung (Carry-over), verunreinigte Vials
Lösung: System reinigen (MeOH/H₂O), neue Vials verwenden, Blank injizieren
Geringe Wiederfindung
Ursachen: Adsorption an Wänden, unzureichende Extraktion, Zersetzung
Lösung: IS zugeben, Glas silanisieren, Extraktion optimieren, Stabilität prüfen

Quellen: Snyder, Kirkland & Dolan ↗, Waters ↗

📊 HPLC-Methodenvalidierung (ICH Q2(R1)) PARTIAL

3 metrics need experimental data

Parameter Wert Einheit ICH-Q2-Kriterium Status
Linearität (R²) keine Daten unitless R² ≥ 0.999 (≥0.99 für bioanalytische) —
LOD (S/N = 3:1) keine Daten ng/mL S/N ≥ 3:1 (niedrigste nachweisbare Konzentration) —
LOQ (S/N = 10:1) keine Daten ng/mL S/N ≥ 10:1 (LOQ ≥ 3×LOD typischerweise) —
Präzision (RSD intraday, n=6) keine Daten % RSD RSD ≤ 2% (intraday) / ≤ 3% (interday) für den API —
Richtigkeit (Wiederfindung, 3 Niveaus) keine Daten % (target 100±2%) Recovery 98-102% (target 100%) —
Linearitätsbereich keine Daten z. B. 0.1-100 ng/mL Mind. 80-120% der Nominalkonzentration —
Selektivität/Spezifität keine Daten qualitative Keine Interferenz — Analyt-Peak vollständig aufgelöst (Rs ≥ 2.0) —
Robustheit (Robustness) keine Daten RSD < 2% bei ±5% Variation RSD < 2% bei kleinen Parametervariationen —
Legende: ✓ PASS ⚠ CAUTION ✗ FAIL — NO_DATA
📚 Wissenschaftliche Referenzen (Chicago Author-Date) — zum Aufklappen klicken

Standards für die Validierung analytischer Methoden — 4 unabhängige Quellen (ICH + USP + AOAC + Snyder).

  1. International Conference on Harmonisation (ICH). 2005. Validation of Analytical Procedures: Text and Methodology Q2(R1). ICH Expert Working Group. [link ↗] — Gold-standard ICH guideline — accepted by EMA, FDA, MHLW, NMPA
  2. United States Pharmacopeia (USP) Convention. 2024. USP General Chapter <621> Chromatography. USP-NF 2024 ed. USP. [link ↗]
  3. AOAC International. 2016. Appendix F: Guidelines for Standard Method Performance Requirements. AOAC INTERNATIONAL. [link ↗] — AOAC SMPR — alternative to ICH Q2 for food/dietary supplements
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. John Wiley & Sons. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗] — Industry standard textbook — Chapter 11 covers method validation
  5. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. Practical HPLC Method Development. 2nd ed. Wiley. ISBN 978-0-471-00703-6. — Classic method-development reference (DryLab heritage).
  6. Rozet, Eric, et al.. 2013. Analysis of recent pharmaceutical regulatory documents on analytical method validation. https://doi.org/10.1016/j.chroma.2007.03.111 [link ↗] — Comparison of FDA / EMA / ICH validation expectations — used for ICH Q2(R1) interpretation.
  7. Heyden, Yvan Vander, et al.. 2009. Robustness of pharmaceutical liquid chromatographic methods. https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗] — Plackett-Burman design for robustness — basis of ICH Q2 §3.7.
  8. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗] — Modern (UHPLC) update of validation chapter — practical RSD/LOD examples.
  9. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. 5th ed. Wiley. ISBN 978-0-470-68218-0. — European pharmacopeial perspective — complements USP/AOAC.
  10. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. HPLC for Pharmaceutical Scientists. Wiley-Interscience. ISBN 978-0-471-68162-4. https://doi.org/10.1002/9780470087954 [link ↗] — Pharma-focused validation case studies (specificity, robustness).
  11. European Medicines Agency (EMA). 2011. Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009. EMA Committee for Medicinal Products for Human Use. [link ↗] — EMA bioanalytical companion to ICH Q2(R1) for clinical samples.

· ⚠ Regulatorische Warnungen SVHC/REACH ↑

🔧 Fehlerbehebung HPLC — Entscheidungsbaum 6 häufige Probleme

Diagnose der 12 häufigsten HPLC-Probleme mit Entscheidungsbaum (5 Schritte pro Problem). Quelle: Snyder/Kirkland/Dolan 3rd ed. Chapter 17 + LCGC LC Troubleshooting columns 1989-2024.

Verbreiterte Peaks (broad peaks) medium

Symptom: Alle Peaks im Chromatogramm sind breiter als erwartet (FWHM > 2× normal)

🔍 Diagnosebaum:
  1. 1. Prüfen Sie, ob alle Peaks verbreitert sind oder nur einige
    → JA: Alle → instrumentelles Problem (Säule oder System)
    → NEIN: Nur einige → chemisches Problem (Wechselwirkung mit der Säule bei bestimmten Analyten)
  2. 2. Tauschen Sie eine Testsäule ein — verschwindet das Problem?
    → JA: SÄULE verschlissen — Packung beschädigt, Void in den ersten mm. Ersetzen.
    → NEIN: Problem im LC-System
  3. 3. Prüfen Sie das Totvolumen (dead volume) — Injektionsschleife, Verbindungen, Detektor
    → JA: Schleife > 100 µL für eine 4.6-mm-Säule oder lose Verbindungen → Ferrulen ersetzen, Kapillaren kürzen
    → NEIN: Diagnose fortsetzen
  4. 4. Temperaturtest: Erhöhen Sie die Säule von 25°C auf 40°C
    → JA: Schmalere Peaks → Massentransferkinetik zu langsam (T erhöhen)
    → NEIN: Continue
  5. 5. Prüfen Sie die Flussrate gegenüber dem van-Deemter-Optimum für diese Säule
    → JA: Optimum für 4.6mm/5µm = 1.0 mL/min, für 2.1mm/3µm = 0.4 mL/min
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Säule verschlissen (>2000 Injektionen ohne Vorsäule)
  • Totvolumen des Systems > 100 µL (falsche Schleife, lange Kapillaren, lose Ferrulen)
  • Temperatur zu niedrig (Massentransferkinetik)
  • Flussrate außerhalb des van-Deemter-Optimums
  • Probenlösungsmittel stärker als mobile Phase A
✓ Lösungen:
  • ✓ Säule ersetzen (bei >2000 Injektionen)
  • ✓ Alle Verbindungen prüfen — Kapillaren so kurz wie möglich
  • ✓ Säulentemperatur auf 40°C erhöhen (wenn die Substanz stabil ist)
  • ✓ Fluss auf das van-Deemter-Optimum reduzieren
  • ✓ Probe in mobiler Phase A lösen (nicht in reinem Organischem)
Peak-Tailing (Tailing, T > 1.5) high

Symptom: Peaks haben einen verlängerten "Schwanz" auf der Seite der späten Elution (Asymmetrie T = b/a > 1.5 gemäß USP)

🔍 Diagnosebaum:
  1. 1. Enthält die Substanz basische Gruppen (Amino, Pyridin)?
    → JA: Ja → Silanol-Wechselwirkungen! Fügen Sie 0.1% TFA oder 5-10 mM TEA zur mobilen Phase A hinzu.
    → NEIN: Continue
  2. 2. Prüfen Sie den pH der mobilen Phase gegenüber dem pKa der Substanz
    → JA: pH = pKa ± 1 → teilweise Ionisierung, Peak-Split. Gehen Sie pH ≥ 2 Einheiten vom pKa weg.
    → NEIN: Continue
  3. 3. Prüfen Sie das Alter der Säule (>1500 Injektionen?)
    → JA: Ja → freigelegte Silanole (Column Bleed). Ersetzen Sie die Säule durch eine mit höherem Endcapping (XTerra, Symmetry).
    → NEIN: Continue
  4. 4. Enthält die Probe Metalle (Fe, Cu aus Glasfläschchen)?
    → JA: Ja → verwenden Sie klare Typ-II-Fläschchen oder PFA. 0.1mM EDTA zur Probe geben.
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Silanol-Wechselwirkungen (basischer Analyt + freie Silanole des Kieselgels)
  • pH an der Grenze des Analyt-pKa (Peak-Split)
  • Alte Säule (Column Bleed, hohe Silanolaktivität)
  • Metalle in der Probe (Chelatbildung → Tailing)
  • Säulenüberladung (>50 µg auf einer 4.6mm-Säule)
✓ Lösungen:
  • ✓ 0.1% TFA (UV) oder 0.1% Ameisensäure (LC-MS) zur mobilen Phase A hinzufügen
  • ✓ Wählen Sie eine Säule mit hochreinem Endcapping: Waters XBridge BEH, Phenomenex Kinetex
  • ✓ Arbeiten Sie bei pH ≥ 2 Einheiten vom pKa entfernt
  • ✓ 0.1mM EDTA zur Probe (Fe/Cu-Chelatbildung)
  • ✓ Injektionsvolumen auf ≤ 20 µL für eine 4.6mm-Säule reduzieren
Grundliniendrift (Baseline Drift) medium

Symptom: Die Grundlinie steigt oder fällt systematisch über >5 Minuten

🔍 Diagnosebaum:
  1. 1. Verwenden Sie einen Gradienten (B% steigt)?
    → JA: Ja → unterschiedliche Absorption der Phasen A vs. B bei dλ. Lösungsmittelwechsel im UV-Cutoff. Prüfen Sie die UV-Absorption des %-Organik-Anteils.
    → NEIN: Weiter (isokratisch)
  2. 2. Prüfen Sie die Säulentemperatur — ist sie auf ±0.5°C stabil?
    → JA: Ja (stabil) → weiter
    → NEIN: Instabil → Säulenthermostat einschalten (>25°C kontrolliert)
  3. 3. Test: Autosampler ausschalten, nur Pumpe+Säule+Detektor betreiben
    → JA: Drift verschwindet → Autosampler-Kontamination (Nadel, Septum reinigen)
    → NEIN: Continue
  4. 4. Prüfen Sie das Alter der Lampe (D2 für UV)
    → JA: Ja (>1500 Stunden) → Lampe ersetzen
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Gradientenelution mit unterschiedlichem UV-Cutoff der Phasen
  • Instabile Säulentemperatur
  • Autosampler-Kontamination von Nadel/Septum
  • UV-Lampe alt (>1500h)
  • Detektor-Durchflusszelle verschmutzt
  • Säule nicht äquilibriert (<10 Säulenvolumina)
✓ Lösungen:
  • ✓ Säule 10-15 Säulenvolumina bei 100% A voräquilibrieren
  • ✓ Säulenthermostat ein, T 30-40°C stabil
  • ✓ Detektor-Durchflusszelle mit 50:50 ACN:H2O reinigen
  • ✓ D2-Lampe ersetzen, wenn >1500h
  • ✓ Grundlinien-Subtraktion verwenden (Chromeleon, native Empower-Funktion)
Kein Peak / verlorener Peak (no peak) critical

Symptom: Der erwartete Analyt-Peak erscheint nicht im Chromatogramm

🔍 Diagnosebaum:
  1. 1. Hat die Injektion tatsächlich stattgefunden?
    → JA: Prüfen Sie das Autosampler-Log, den Pumpendruck (sollte bei der Injektion abfallen)
    → NEIN: Autosampler-Problem → Schleife, Nadel, Probe im Fläschchen prüfen
  2. 2. Ist die Probe im Fläschchen (korrektes Volumen, nicht verdunstet)?
    → JA: Continue
    → NEIN: Keine Probe — erneut pipettieren
  3. 3. Probenstabilität — vor >24h vorbereitet?
    → JA: Ja → Degradation. Bereiten Sie eine frische Probe vor.
    → NEIN: Continue
  4. 4. Prüfen Sie die Detektionswellenlänge gegenüber dem λmax der Substanz
    → JA: Detektion bei λ entspricht NICHT dem λmax → kein Signal. DAD 200-400nm scannen.
    → NEIN: Continue
  5. 5. Test: Injizieren Sie einen reinen Standard (bekannter Konzentration, frisch)
    → JA: Standard ergibt einen Peak → Problem mit der Probe (Matrix, Derivatisierung)
    → NEIN: Kein Peak auch mit dem Standard → Systemproblem (Säule, Phase, Gradient)
⚠️ Typische Ursachen:
  • Probe nicht aus dem Fläschchen entnommen (Autosampler-Fehler)
  • Probe degradiert (>24h pH/Temp/Licht)
  • Detektion bei falscher Wellenlänge
  • Falsche mobile Phase (z. B. vergessenes TFA)
  • Säule umgekehrt / falsche stationäre Phase
  • Substanz eluiert an der Front (V0) → nicht retendiert, nicht sichtbar
✓ Lösungen:
  • ✓ Frische Probe nach dem exakten Protokoll neu vorbereiten
  • ✓ UV-Vis-DAD-Scan 200-400nm + Suche nach λmax
  • ✓ Zusammensetzung der mobilen Phase prüfen — TFA hinzugefügt?
  • ✓ Umgekehrte Säulenrichtung testen (vorsichtig!)
  • ✓ Bei Retention <1 min — % B verringern, MeOH statt ACN
  • ✓ Prüfen Sie die Tabelle "expected_rt" in wp_molgod_hplc_methods
Druck zu hoch (pressure too high) critical

Symptom: Pumpendruck > 80% des Säulenmaximums oder System-Shutdown mit High-Pressure-Fehler

🔍 Diagnosebaum:
  1. 1. Prüfen Sie, ob die Säule korrekt angeschlossen ist (Pfeilrichtung)
    → JA: OK
    → NEIN: Säule umgekehrt → umdrehen (niemals "rückwärts" betreiben)
  2. 2. Test: Säule aus dem System entfernen, nur Pumpe+Detektor betreiben
    → JA: Druck fällt auf <50 bar → Problem in der Säule (verstopft)
    → NEIN: Druck bleibt hoch → In-Line-Filter verstopft, Fritte verschmutzt
  3. 3. Prüfen Sie den Vorsäulenfilter (In-Line-Fritte)
    → JA: Verschmutzt und braun → ersetzen
    → NEIN: Continue
  4. 4. Säule rückwärts mit 50:50 ACN:H2O spülen, ohne die Säule — verschwindet es?
    → JA: Partikel im ersten mm stecken geblieben — 30 min Spülung kann sie wiederherstellen
    → NEIN: Säule ersetzen
⚠️ Typische Ursachen:
  • In-Line-Filter (Fritte) mit Partikeln verstopft
  • Puffer-Aussalzung (Ausfällung bei hohem %B)
  • Probe enthält Schwebstoffe (0.22 µm vor der Injektion filtrieren)
  • Säule verstopft (Column Bed Compaction)
  • Gradient mit Pufferphase + viel Organik → Salzausfällung
✓ Lösungen:
  • ✓ Probe IMMER durch 0.22 µm PVDF vor der Injektion filtrieren
  • ✓ In-Line-Filter alle 100 Injektionen ersetzen (oder wenn der Druck >20% steigt)
  • ✓ Verwenden Sie NICHT >20mM Phosphatpuffer + >70% ACN (das Salz fällt aus)
  • ✓ Säule 30 min mit 50:50 ACN:H2O in umgekehrter Richtung spülen (wenn vom Hersteller zugelassen)
  • ✓ Vorsäule 4×3mm zum Schutz der Hauptsäule
Geisterpeaks (Ghost Peaks) high

Symptom: Unerklärte Peaks im Chromatogramm, die in der Kalibrierung fehlen

🔍 Diagnosebaum:
  1. 1. Test: Blindinjektion (reines Probenlösungsmittel)
    → JA: Ein Geisterpeak erscheint → Kontamination des Systems oder der Eluenten
    → NEIN: Erscheint nur mit der Probe → Matrix
  2. 2. Wächst der Geisterpeak mit dem Gradienten (eluiert bei hohem %B)?
    → JA: Ja → überladene Säule oder stark retendiert aus einem vorherigen Lauf
    → NEIN: Unabhängig vom Gradienten → Autosampler-Verschleppung
  3. 3. Increase carryover wash (between injections)
    → JA: Hilft → Verschleppung war die Ursache. Stärkeres Waschprotokoll.
    → NEIN: Continue
  4. 4. Reinwasser-Injektion — gibt es einen Peak?
    → JA: Ja → Kontamination der Wasserquelle (Organik aus dem DI-System)
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Verschleppung in Autosampler-Nadel/-Schleife
  • Eluent-Kontamination (auch in HPLC-Qualität)
  • Stark retendierte Komponenten aus vorherigen Läufen
  • Kunststoff in den Fläschchen (Phthalate, PEG aus den Kappen)
  • DI-Wasser unzureichend gereinigt
✓ Lösungen:
  • ✓ Waschprotokoll verstärken: 100% B → 100% A → 50:50 (3 Zyklen)
  • ✓ Starke Wäsche: 100% DMSO oder 100% MeOH vor der Kalibrierung
  • ✓ Eluenten im Zweifelsfall durch 0.22 µm PTFE filtrieren
  • ✓ Braunglas + Teflon-beschichtete Kappen für Proben verwenden
  • ✓ Periodische Gradientenrampe auf 100% B für 10 min (Reinigung)
📚 Wissenschaftliche Referenzen (Chicago Author-Date) — zum Aufklappen klicken
  1. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. John Wiley & Sons. Chapter 17 (Troubleshooting) pp. 559-616. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗]
  2. Dolan, John W.. 2014. LC Troubleshooting (monthly column 1989-2024). LCGC North America. [link ↗] — John Dolan 35-letnia seria miesięcznych artykułów problemowych
  3. Kromidas, Stavros. 2017. HPLC Made to Measure: A Practical Handbook for Optimization. 2nd ed. Wiley-VCH. ISBN 978-3-527-31377-1. — Praktyczny przewodnik problem-solving dla labs analitycznych
  4. Dolan, John W.. 2013. When to Modify Method Conditions. 192-199. [link ↗] — Decision flow for changing flow rate / temperature / %B vs swapping columns.
  5. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗] — Chapter 9 covers troubleshooting modern UHPLC systems (sub-2 µm particles).
  6. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. 5th ed. Wiley. ISBN 978-0-470-68218-0. — Solid step-by-step problem isolation chapter (eluents, columns, instruments).
  7. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. Practical HPLC Method Development. 2nd ed. Wiley. ISBN 978-0-471-00703-6. — Method-development companion volume with troubleshooting cross-refs.
  8. Carr, Peter W.. 2009. The new physical chemistry of HPLC. 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗] — Theoretical basis for diagnosing efficiency losses (mass-transfer, eddy diffusion).
  9. Heyden, Yvan Vander, et al.. 2009. Robustness of pharmaceutical liquid chromatographic methods. 2120-2129. https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗] — How to diagnose method failures vs. system failures (Plackett-Burman).
  10. Engelhardt, Heinz. 2014. 100 Years of Chromatography. 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5. — Historical context for ghost-peak phenomenology (silica chemistry).
  11. Stoll, Dwight R., and Peter W. Carr. 2017. Two-Dimensional Liquid Chromatography: A State of the Art Tutorial. 519-531. https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. The new physical chemistry of HPLC. 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations. 1167-1182. https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. 100 Years of Chromatography. 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. Probabilistic approach to peak deconvolution in chromatography. 8525-8531. https://doi.org/10.1021/ac101742z [link ↗]
🧪 Löslichkeit und Lösungsmittelkompatibilität MolGod_SOLUB_1
Molekül
Toluen
Formel
C₇H₈
logP
2.70
Masse (g/mol)
92.14
Polarität
Hydrophob (unpolar)

⚠️ HSP-Schätzung (Literatur / Group Contribution). Richtwerte — ersetzen keine experimentellen Untersuchungen.

Lösungsmittel Compat. Ra Visuell GC-MS HPLC Anwendungen Referenzen
Water (H₂O)− Schwach43.2
✗ NieA (aqueous) (RP)
PufferZellkulturanalytischhydrophile Extraktion
Ethanol (EtOH)− Schwach19.4
✗ NieA/B modifier (RP/NP)
ExtraktionSpektroskopie (UV-Vis)SyntheseHPLC-Modifier
Methanol (MeOH)− Schwach23.8
✗ NieA/B (RP) (RP)
HPLC (eluent)LC-MSKarl FischerUV-transparent do 205 nm
Acetone− Schwach11.4
✗ NieB modifier (NP)
GC headspaceKristallisationEntfettungSynthese
Acetonitrile (ACN)− Schwach17.9
✗ NieB (RP) (RP)
HPLC-Eluent (Goldstandard)LC-MS (wolny cut-off UV 190 nm)Peptidanalyse
DMSO− Schwach17.1
✗ NieN/A (N/A)
NMR (d6-DMSO)Zellbiologie (Kryokonservierung)ArzneimittelabgabeSynthese
THF~ Mittel7.8
✗ NieB (NP) (NP)
GPC/SEC (Polymeranalyse)Grignard-Synthesemetallorganisch
DCM (CH₂Cl₂)+ Gut6.4
✓ TakB (NP) (NP)
ExtraktionNP-HPLCGC-MSKristallisation (Anti-Solvens)
Chloroform (CHCl₃)+ Gut4.1
✓ TakN/A (toxic) (N/A)
NMR (CDCl3)Lipidextraktion (Folch-Methode)NP-TLC
Hexane+ Gut6.7
✓ TakA (NP) (NP)
NP-HPLCÖlextraktion (Lipide)GC-MSTLC (NP)
Toluene+ Gut0.0
✓ TakB (NP) (NP)
NMR (d8-toluene)SyntheseDean-Stark azeotrope Trocknung
📚 Wissenschaftliche Referenzen für Lösungsmittel (Chicago Author-Date) — zum Aufklappen klicken

11 Lösungsmittel × 5 unabhängige wissenschaftliche Quellen (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/Wypych/Armarego/Snyder/GESTIS). 55+ vollständige Zitate unten.

Water (H₂O)
  1. NIST — NIST Chemistry WebBook — Water (CAS 7732-18-5)
  2. CRC — CRC Handbook of Chemistry and Physics, 104th ed., Sec. 8 (Properties of Water)
  3. IAPWS — IAPWS Release on Static Dielectric Constant of Water
  4. Reichardt 2011 — Solvents and Solvent Effects in Organic Chemistry
  5. GESTIS — GESTIS Substance Database — Water
Ethanol (EtOH)
  1. NIST — NIST Chemistry WebBook — Ethanol (CAS 64-17-5)
  2. CRC — CRC Handbook — Ethanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — Ethanol eluotropic
  4. Smallwood — Handbook of Organic Solvent Properties — Ethanol
  5. GESTIS — GESTIS Substance Database — Ethanol
Methanol (MeOH)
  1. NIST — NIST Chemistry WebBook — Methanol (CAS 67-56-1)
  2. CRC — CRC Handbook — Methanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — MeOH eluotropic, eo=0.95
  4. GESTIS — GESTIS Substance Database — Methanol
Acetone
  1. NIST — NIST Chemistry WebBook — Acetone (CAS 67-64-1)
  2. CRC — CRC Handbook — Acetone physical & thermodynamic constants
  3. Hansen 2007 — Hansen Solubility Parameters — Acetone (dD=15.5, dP=10.4, dH=7.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Acetone
  5. GESTIS — GESTIS Substance Database — Acetone
Acetonitrile (ACN)
  1. NIST — NIST Chemistry WebBook — Acetonitrile (CAS 75-05-8)
  2. CRC — CRC Handbook — Acetonitrile constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — ACN gold-standard HPLC eluent
  4. Reichardt 2011 — Solvents and Solvent Effects — ACN dipolar aprotic
  5. GESTIS — GESTIS Substance Database — Acetonitrile
DMSO
  1. NIST — NIST Chemistry WebBook — DMSO (CAS 67-68-5)
  2. Wypych 2019 — Handbook of Solvents Vol. 1 — DMSO comprehensive properties
  3. Hansen 2007 — HSP — DMSO (dD=18.4, dP=16.4, dH=10.2)
  4. Reichardt 2011 — Solvents and Solvent Effects — DMSO E_T(30)=45.1, dipolar aprotic
  5. GESTIS — GESTIS Substance Database — DMSO
THF
  1. NIST — NIST Chemistry WebBook — THF (CAS 109-99-9)
  2. Armarego 2009 — Purification of Laboratory Chemicals — THF drying & peroxide test
  3. Hansen 2007 — Hansen Solubility Parameters — THF (dD=16.8, dP=5.7, dH=8.0)
  4. Smallwood — Handbook of Organic Solvent Properties — THF
  5. GESTIS — GESTIS Substance Database — Tetrahydrofuran
DCM (CH₂Cl₂)
  1. NIST — NIST Chemistry WebBook — Dichloromethane (CAS 75-09-2)
  2. IARC 71 — IARC Monograph 71 — DCM (Group 2A carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — DCM (dD=18.2, dP=6.3, dH=6.1)
  4. Reichardt 2011 — Solvents and Solvent Effects — DCM polarity index
  5. GESTIS — GESTIS Substance Database — Dichloromethane
Chloroform (CHCl₃)
  1. NIST — NIST Chemistry WebBook — Chloroform (CAS 67-66-3)
  2. IARC 73 — IARC Monograph 73 — Chloroform (Group 2B carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — CHCl3 (dD=17.8, dP=3.1, dH=5.7)
  4. Reichardt 2011 — Solvents and Solvent Effects — CHCl3 H-bond donor strength
  5. GESTIS — GESTIS Substance Database — Chloroform
n-Hexane
  1. NIST — NIST Chemistry WebBook — n-Hexane (CAS 110-54-3)
  2. ATSDR n-Hexane — ATSDR Toxicological Profile for n-Hexane — neuropatia obwodowa (n-Heksan NIE jest kancerogenem IARC)
  3. Hansen 2007 — Hansen Solubility Parameters — n-Hexane (dD=14.9, dP=0, dH=0)
  4. Snyder & Kirkland — Modern Liquid Chromatography — n-Hexane NP standard, eo=0.00
  5. GESTIS — GESTIS Substance Database — n-Hexane
Toluene
  1. NIST — NIST Chemistry WebBook — Toluene (CAS 108-88-3)
  2. IARC 71 — IARC Monograph 71 — Toluene
  3. Hansen 2007 — Hansen Solubility Parameters — Toluene (dD=18.0, dP=1.4, dH=2.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Toluene
  5. GESTIS — GESTIS Substance Database — Toluene
Löslichkeitstheorie (angewendet in der Verträglichkeitsvorhersage):
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. CRC Press. https://doi.org/10.1201/9781420006834 — HSP-Triplett (dD, dP, dH) + Ra-Formel.
  3. Stefanis, E., and C. Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." Int J Thermophys 29: 568–585. https://doi.org/10.1007/s10765-008-0415-z
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solwatochromia.
  5. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  6. Van Krevelen, D. W., and K. Te Nijenhuis. 2009. Properties of Polymers. 4th ed. Elsevier. https://doi.org/10.1016/B978-0-08-054819-7.X0001-5 — Hoftyzer–Van Krevelen group contribution dla dD/dP/dH z SMILES.
  7. Marcus, Yizhak. 1998. The Properties of Solvents. Wiley Series in Solution Chemistry, Vol. 4. ISBN 9780471983699 — Vollständige tabellarische Sammlung von 250+ Lösungsmitteln (ε, μ, Donizität, Akzeptorzahlen).
  8. PubChem Compound Database — CAS 108-88-3 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Vollständige Bibliografie im Akkordeon REFERENZEN (am Ende der Seite) — Chicago Manual of Style 17th ed., Author-Date.

📚 Technische FAQ — Toluen (5) MolGod_TECHFAQ_1
❓ Jak przygotować roztwór standardowy toluenu o stężeniu 10 mg/ml?
Aby przygotować roztwór standardowy toluenu o stężeniu 10 mg/ml, należy odważyć dokładnie 10 mg czystego toluenu (CAS 108-88-3) i rozpuścić w 1 ml rozpuszczalnika (np. heksanu lub dichlorometanu). Masa molowa toluenu wynosi 92.14 g/mol, więc 10 mg to około 0.108 mmol. Roztwór należy dokładnie wymieszać i przechowywać zgodnie z zaleceniami dotyczącymi przechowywania toluenu.
Hilfreich?
❓ W jakich warunkach należy przechowywać toluen 100ml czysty odczynnik CAS 108-88-3?
Toluen należy przechowywać w szczelnie zamkniętym pojemniku, w temperaturze poniżej 25°C, z dala od bezpośredniego światła słonecznego i źródeł ciepła. Wilgotność powietrza nie powinna przekraczać 60%. Przechowywanie w warunkach chłodniczych (4-8°C) jest zalecane dla długotrwałego przechowywania.
Hilfreich?
❓ Jaka metoda analityczna jest najbardziej odpowiednia do analizy toluenu o masie molowej 92.14 g/mol i logP około 0.5?
Dla toluenu o masie molowej 92.14 g/mol i logP około 0.5, najbardziej odpowiednią metodą analityczną jest chromatografia gazowa (GC) z detektorem płomieniowo-jonizacyjnym (FID). Metoda ta jest preferowana ze względu na niską polarność i lotność toluenu, co pozwala na efektywne rozdzielenie i analizę próbki.
Hilfreich?
❓ Jakie są potencjalne reakcje i niezgodności chemiczne toluenu z innymi substancjami?
Toluen może reagować z silnymi utleniaczami, takimi jak nadmanganian potasu (KMnO4) lub dichromian potasu (K2Cr2O7), prowadząc do jego utlenienia. Nie należy mieszać toluenu z kwasami Lewisa, takimi jak chlorek glinu (AlCl3) czy fluorek boru (BF3), ponieważ może to prowadzić do niepożądanych reakcji. Toluen jest również niezgodny z wodą i innymi polarnymi rozpuszczalnikami, tworząc mieszaniny o ograniczonej stabilności.
Hilfreich?
❓ W jakich praktycznych zastosowaniach laboratoryjnych wykorzystuje się toluen 100ml czysty odczynnik CAS 108-88-3?
Toluen jest szeroko stosowany jako rozpuszczalnik w syntezie organicznej, np. do rozpuszczania tłuszczów, olejów i żywic. Jest również używany jako reagent w reakcjach alkilacji i acylacji. W laboratoriach analitycznych toluen jest wykorzystywany jako standard w chromatografii gazowej (GC) oraz jako rozpuszczalnik w przygotowaniu próbek do analizy.
Hilfreich?
🧮 Laborrechner (8) MolGod_LABCALC_1
Verdünnung (C₁V₁=C₂V₂)
Molarität (M=n/V)
pH-Puffer (Henderson-Hasselbalch)
Beer-Lambert (A=εcl)
Masse → Mol
Konzentration % → M
ppm → mg/L
Temperatur C↔F↔K

Verifizierte Formeln: IUPAC Gold Book ↗, DOI ↗

📊 Spektroskopische Spektrendatenbanken MolGod_SPECDB_3
📋 Laborprotokoll-Generator MolGod_PROTOCOL_1

Protokoll erstellt auf Grundlage von: GHS SDS, Aldrich Lab Guide ↗

🏷️ Etiketten-Generator (QR) MolGod_LABEL_1
Toluol• Toluene / Methylbenzene• CAS: 108-88-3• Formel: C7H8• Masse: 92.14 g/molGEFAHRGHS-GEFAHRENHINWEISE:H225: Flüssigkeit und Dampf leicht entzündbar.H304: Kann bei Verschlucken und Eindringen in die Atemwege tödlich sein.H336: Kann Schläfrigkeit und Benommenheit verursachen.H373: Kann die Organe schädigen bei längerer oder wiederholter Exposition.DH ScientificScience first. Commerce as consequence.Charge-Nr.: Nettomasse: Herst.:
ADMET — Pharmakologisches Profil
ADMET-Vorhersagen werden geladen…
⏳ Stabilitäts- & Haltbarkeitsberater Arrhenius
Methodik: Arrhenius equation k = A·exp(-Ea/RT). Zitat: Connors KA et al. 1986 · ICH Q1A(R2)

Geben Sie die Lagerbedingungen ein → der Arrhenius-Algorithmus prognostiziert die verbleibende Konzentration, die Halbwertszeit und eine Verwendungsempfehlung.

Sichtbare Anzeichen von Abbau:
❄️ Lagerungsempfehlungen
Temperature:
15-25°C
Light:
Ambient
Container:
HDPE/glass
Incompatible:
Strong oxidizers
🧪 Assistent zur Lösungsherstellung (Smart Prep) MolGod_PREP_2

Geben Sie ein, was Sie zubereiten möchten — ich erstelle eine SOP

Beispiele unten — zum Einfügen anklicken:
Fertige Rezepte:
📚 Überblick über die wissenschaftliche Literatur — CAS 108-88-3MolGod_LITHUB_MAIN
⭐ Wichtigste Erkenntnisse (wissenschaftliche Literatur) 6 Publikationen
🏆 CAS 108-88-3 — multi-criteria ranking (W12): 30% Zitierungen · 20% Aktualität · 20% Thema · 15% historisch · 15% Open Access.
  1. #1
    Friedel, C.; Crafts, J.M. (review) (1979) · Organic Reactions
    Warum es wichtig ist: Pflichtzitat (Kanon) · hoher Impact (1480 Zitierungen)
    SCORE 11.76 Mechanismus MUST-CITE Zitierungen: 1480 DOI ↗
  2. #2
    Win-Shwe, T.T.; Fujimaki, H. (2014) · Toxicology Letters
    Warum es wichtig ist: Pflichtzitat (Kanon) · 260 Zitierungen · Übersichtsarbeit
    SCORE 8.45 Übersicht MUST-CITE Zitierungen: 260 DOI ↗
  3. #3
    Olah, G.A.; Molnár, Á. (2005) · Wiley
    Warum es wichtig ist: Pflichtzitat (Kanon) · 340 Zitierungen
    SCORE 8.4 Mechanismus MUST-CITE Zitierungen: 340 DOI ↗
  4. #4
    Cesar, R.; Loureiro, C.; Maia, R. (2010) · Catalysis Reviews
    Warum es wichtig ist: Pflichtzitat (Kanon) · 140 Zitierungen
    SCORE 8.05 Industrie MUST-CITE Zitierungen: 140 DOI ↗
  5. #5
    Filley, C.M.; Halliday, W.; Kleinschmidt-DeMasters, B.K. (2007) · Journal of Neuropathology and Experimental Neurology
    Warum es wichtig ist: Pflichtzitat (Kanon) · 380 Zitierungen
    SCORE 7.74 Pharmakologie MUST-CITE Zitierungen: 380 DOI ↗
  6. #6
    Brugnone, F.; Perbellini, L.; Romeo, L.; Bianchin, M.; Tonello, A. (1991) · International Archives of Occupational and Environmental Health
    Warum es wichtig ist: Pflichtzitat (Kanon) · 120 Zitierungen
    SCORE 6.25 Pharmakologie MUST-CITE Zitierungen: 120 DOI ↗
📈 HPLC-Gradient — Optimierer (LSS) VORLAGE

Gradient basierend auf PubChem XLogP3 + LSS (Snyder et al. 2010, Kap. 9).

  • Säule: C18
  • Puffer: phosphate
  • Fluss: 1 mL/min
  • logP: 2.7 (PubChem XLogP3)
  • Rampe: 27% → 95% B, 15 min
  • Gesamtanalysenzeit: 28 min
t (min) %A %B flow (mL/min) Kommentar
0 73 27 1 Start (Gleichgewicht)
2 73 27 1 Ende der Anfangshaltezeit
17 5 95 1 Ende der LSS-Rampe
22 5 95 1 Säulenspülung
23 73 27 1 Rückkehr zu init
28 73 27 1 Reäquilibrierung
📚 Wissenschaftliche Referenzen (Chicago Author-Date)
  1. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley. — Chapter 9 — gradient elution, LSS theory (cited as Snyder et al. 2010 in tool description).
  2. Schoenmakers, Peter J. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier. — Numerical optimization of gradient programs.
  3. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley. — Foundational LSS reference for the %B_init = 5 + 8·logP heuristic implemented here.
  4. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. [DOI ↗] — Modern review of gradient retention models — basis for non-LSS extensions.
  5. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. [DOI ↗]
  6. Dong, Michael W. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793. — Modern UHPLC gradient programming, sub-2 µm scaling rules.
  7. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. [DOI ↗]
  8. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. [DOI ↗] — Reference for orthogonal gradient design (2D-LC second dimension).
  9. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199.
  10. Meyer, Veronika R. 2010. Practical High-Performance Liquid Chromatography. Wiley. — Chapter 7 — practical gradient design with isokratyczny scouting.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. [DOI ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. [DOI ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. [DOI ↗]
  14. Engelhardt, Heinz. 2014. 100 Years of Chromatography. Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531. [DOI ↗]

REST: /wp-json/molgod/v1/hplc/gradient/108-88-3

🌈 Detektor + Wellenlänge (UV/Vis) 261 nm
VerbindungToluene
λmax261 nm
λmin250 nm
εmax (M⁻¹·cm⁻¹)225
Lösungsmittel (Referenz)cyclohexane
Empfohlene λ261 nm
Empfohlener DetektorPDA/DAD
AlternativenUV, MS

Datenquelle: Pavia 2014, ch. 5

📚 Wissenschaftliche Referenzen (Chicago Author-Date) 17 refs

METODA Methoden-Bibliografie

  1. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2017. "Principles of Instrumental Analysis." 7th ed. Cengage Learning. ISBN 978-1-305-57721-3.
  2. Perkampus, Heinz-Helmut. 1992. "UV-VIS Spectroscopy and Its Applications." Springer. ISBN 978-3-642-77479-9. →
  3. Sadek, Paul C.. 2002. "The HPLC Solvent Guide." 2nd ed. Wiley-Interscience. ISBN 978-0-471-41138-4.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. Wiley. ISBN 978-0-470-16754-0. →
  5. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. ISBN 978-1-119-31378-3. →
  6. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." 5th ed. Wiley. ISBN 978-0-470-68218-0.
  7. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 →
  8. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 →
  9. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience. ISBN 978-0-471-68162-4. →
  10. Kim, Sunghwan, et al.. 2023. "PubChem 2023 update." Nucleic Acids Research 51: D1373-D1380 →
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 →
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 →
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 →
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 →

REST: /wp-json/molgod/v1/hplc/detector/108-88-3

📐 HPLC-Peaksymmetrie-Rechner (USP Tf / As)

Berechnen Sie den USP-Tailing-Faktor (T) und die Asymmetrie (As) aus den Peak-Halbwertsbreiten. Geben Sie a (linke Halbbreite) und b (rechte Halbbreite) an, gemessen bei 5% oder 10% der Peakhöhe.

📚 Referenzen (Chicago Author-Date)
  1. USP General Chapter <621>. 2024. "Chromatography." United States Pharmacopeial Convention. [link ↗] — Defines USP Tailing Factor T = (a+b)/(2a) measured at 5% peak height.
  2. International Council for Harmonisation (ICH). 2023. "Validation of Analytical Procedures Q2(R2)." ICH Expert Working Group. [link ↗] — Tailing factor is a system suitability parameter (Section 6).
  3. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." Analytical Chemistry 55: 730-737 https://doi.org/10.1021/ac00255a033 [link ↗] — Original asymmetry factor As = b/a at 10% height (Foley & Dorsey 1983).
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." Wiley. https://doi.org/10.1002/9780470508183 [link ↗] — Chapter 2.4 — peak shape diagnostics and remedies.
  5. Dolan, John W.. 2003. "Peak tailing and resolution." LCGC North America 21: 610-614 [link ↗] — How tailing factor degrades effective resolution.
  6. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗] — Modern numerical deconvolution for asymmetric peaks.
  7. Kromidas, Stavros. 2017. "HPLC Made to Measure: A Practical Handbook for Optimization." Wiley-VCH. — Practical Tf and As thresholds for routine QC.
  8. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." Wiley. https://doi.org/10.1002/9781119313793 [link ↗]
  9. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." Wiley.
  10. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." Journal of Chromatography B 877: 2120-2129 https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗]
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗]
📊 Rechner für Auflösung und Bodenzahl (Rs, N, H)

Berechnen Sie die Auflösung Rs, die theoretische Bodenzahl N und HETP (H) für ein Paar von HPLC-Peaks. Geben Sie die Retentionszeiten, Peakbreiten (bei 50% oder an der Basis) und die Säulenlänge an.

📚 Referenzen (Chicago Author-Date)
  1. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. John Wiley & Sons. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗] — Chapter 2 covers resolution, plate count and HETP fundamentals (Snyder et al. 2010).
  2. USP General Chapter <621>. 2024. "Chromatography." USP-NF 2024 ed. United States Pharmacopeial Convention. [link ↗] — Defines Rs >= 1.5 acceptance criterion and N calculation methods.
  3. Dolan, John W.. 2003. "How much resolution is enough?." LCGC North America 21: 350-353 [link ↗] — Practical guidance on Rs targets for routine method development.
  4. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." Chemical Engineering Science 5: 271-289 https://doi.org/10.1016/0009-2509(56)80003-1 [link ↗] — Origin of N = 5.54·(tr/w0.5)² half-height plate count formulation.
  5. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory." Marcel Dekker. ISBN 978-0-8247-1357-7. — Resolution equation Rs = (1/4)·√N·(α-1)/α·k/(1+k) (master equation).
  6. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." Analytical Chemistry 55: 730-737 https://doi.org/10.1021/ac00255a033 [link ↗] — Skewed-peak corrections to apparent N.
  7. Knox, John H.. 1977. "Practical aspects of LC theory." Journal of Chromatographic Science 15: 352-364 https://doi.org/10.1093/chromsci/15.9.352 [link ↗]
  8. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  9. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗]
  10. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." 5th ed. Wiley. ISBN 978-0-470-68218-0.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗]

Related products

🧪 Systemeignung — Live-Rechner (USP <621>)

Geben Sie Daten aus 5-6 Injektionen ein (Flächen, tR, Tailing, Böden) — der Rechner berechnet %RSD, Mittelwerte und prüft die Konformität mit USP <621>. Sie können CSV (kommagetrennt) einfügen oder einzelne Werte bearbeiten.

📚 Referenzen (Chicago Author-Date)
  1. USP General Chapter <621>. 2024. "Chromatography (System Suitability section)." USP-NF 2024 ed. United States Pharmacopeial Convention. [link ↗] — Defines RSD area < 2%, tailing < 2.0, N > 2000 acceptance criteria.
  2. International Council for Harmonisation (ICH). 2023. "Validation of Analytical Procedures Q2(R2)." ICH Expert Working Group. [link ↗] — Section 5.4 — system suitability is part of method validation.
  3. US Food and Drug Administration (FDA). 2018. "Reviewer Guidance: Validation of Chromatographic Methods." US Food and Drug Administration. [link ↗] — CDER reviewer perspective on chromatographic validation expectations.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. Wiley. — Chapter 2 — system suitability fundamentals (RSD, Tf, N).
  5. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." — Robustness vs. system suitability — design-of-experiments framework.
  6. Rozet, Eric, et al.. 2013. "Analysis of recent pharmaceutical regulatory documents on analytical method validation."
  7. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA. [link ↗] — EMA companion guideline with bioanalytical SS criteria.
  8. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. — UHPLC-specific suitability adjustments (n=5 vs. n=6).
  9. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience.
  10. AOAC International. 2016. "Appendix F: Guidelines for Standard Method Performance Requirements." AOAC INTERNATIONAL. [link ↗] — Alternative SS thresholds for food/dietary samples.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial."
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC."
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations."
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography."

Inne produkty z tej kategorii

📈 UV-VIS-Spektrenvorhersage (200-400 nm) λmax 261 nm MolGod_UVVIS_1
0%25%50%75%100%200250300350400261 nmA = ε·c·lA / Aₘₐₓ (%)
VerbindungToluene
λmax261 nm
λmin250 nm
εmax (M⁻¹·cm⁻¹)225
Lösungsmittel (Abfrage)water
Lösungsmittel (Referenz)cyclohexane
Konzentration (M)1e-4
Schichtdicke (cm)1
FWHM der Kurve22 nm

Modell: Gauß-Kurve zentriert auf λmax mit Skalierung nach dem Beer-Lambert-Gesetz A = ε · c · l. Transmission T = 10^(-A) · 100%.

📚 Wissenschaftliche Referenzen (Chicago Author-Date)
  1. Liu W; Xin S; Wang X; Zhang Y; Dai W; Li H. 2026. "Enhanced toluene catalytic oxidation over Ag-Cu co-modified Mn(2)O(3): the crucial roles of surface structure reconstruction process." Environmental research. https://doi.org/10.1016/j.envres.2026.124120. [DOI]
  2. Ben Attia T; Gannouni N; Galai S; Mhamdi A. 2025. "[Synergistic Effect of Noise and Toluene Upon Hematological Alterations, Pulmonary Oxidative Stress and Inflammation]." La Tunisie medicale. https://doi.org/10.62438/tunismed.v103i10.5718. [DOI]
  3. Zhou W; Feng F; Zhang J; Cao S; Zhou Y; Li Y. 2025. "pH-Sensitive Porphyrin Metal-Organic Frameworks for Controlled Delivery of Para-Toluenesulfonamide and Photodynamic Cancer Therapy." Drug design, development and therapy. https://doi.org/10.2147/DDDT.S504891. [DOI]
  4. Wei Z; Ni W; Mele G; Lü XF; Wang W; Jiang ZY. 2025. "Recyclable magnetic composites prepared by a novel reverse encapsulation reaction to increase benzene rings reactive sites for enhanced removal of 3,4-diaminotoluene: Theoretical prediction with experimental statistics." Environmental research. https://doi.org/10.1016/j.envres.2025.121140. [DOI]
  5. Linstrom, Peter J., and William G. Mallard, eds. 2023. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. [DOI]
  6. Mayerhöfer, Thomas G., Samir Pahlow, and Jürgen Popp. 2020. "The Bouguer-Beer-Lambert Law: Shining Light on the Obscure." ChemPhysChem 21 (18): 2029-2046. [DOI]
  7. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2017. Principles of Instrumental Analysis. 7th ed. Boston: Cengage Learning. ISBN 978-1-305-57721-3.
  8. Lindon, John C., George E. Tranter, and David W. Koppenaal, eds. 2017. "Encyclopedia of Spectroscopy and Spectrometry." 3rd ed. Amsterdam: Academic Press. ISBN 978-0-12-803224-4.
  9. Field, Leslie D., Sev Sternhell, and John R. Kalman. 2013. "Organic Structures from Spectra." 5th ed. Chichester: Wiley. ISBN 978-1-119-96582-6.
  10. Reusch, William. 2013. "Virtual Textbook of Organic Chemistry: Spectroscopy." East Lansing, MI: Michigan State University.
  11. Lampman, Gary M., Donald L. Pavia, George S. Kriz, and James R. Vyvyan. 2010. "Spectroscopy." 4th ed. Belmont, CA: Cengage Learning. ISBN 978-0-495-88992-9.
  12. Kalsi, P. S. 2010. "Spectroscopy of Organic Compounds." 6th ed. New Delhi: New Age International. ISBN 978-81-224-2032-9.
  13. Williams, Dudley H., and Ian Fleming. 2008. "Spectroscopic Methods in Organic Chemistry." 6th ed. London: McGraw-Hill. ISBN 978-0-07-711559-0.
  14. Sadek, Paul C. 2002. The HPLC Solvent Guide. 2nd ed. Hoboken: Wiley. ISBN 978-0-471-41242-2.
  15. Banwell, Colin N., and Elaine M. McCash. 1994. "Fundamentals of Molecular Spectroscopy." 4th ed. London: McGraw-Hill. ISBN 978-0-07-707976-1.
  16. Perkampus, Heinz-Helmut. 1992. UV-VIS Spectroscopy and Its Applications. Berlin: Springer. https://doi.org/10.1007/978-3-642-77479-9.
  17. Fieser, Louis F. 1949. "Extension of Woodward's Rules for Prediction of Conjugated Diene Absorption." Journal of the American Chemical Society 71 (5): 1854-1857. [DOI]
  18. Woodward, Robert B. 1942. "Structure and the Absorption Spectra of Alpha,Beta-Unsaturated Ketones." Journal of the American Chemical Society 64 (1): 72-75. [DOI]
  19. Beer, August. 1852. "Bestimmung der Absorption des rothen Lichts in farbigen Flüssigkeiten." Annalen der Physik und Chemie 86: 78-88. https://doi.org/10.1002/andp.18521620505.
  20. Lambert, Johann Heinrich. 1760. Photometria. Augsburg: Sumptibus Vidae.
🔍 Bestätigung durch unabhängige Quellen SINGLE λmax = 276 nm (1 Quellen, ±5 nm)
  • 🗃️ database Kim, Sunghwan, et al. 2023. "PubChem 2023 update." Nucleic Acids Research 51 (D1): D1373-D1380. https://doi.org/10.1093/nar/gkac956. UV spectrum data for CAS 108-88-3 sourced from Hazardous Substances Data Bank (HSDB). PubChem CID: 1140. Accessed 2026. λ=276 nm
  • 🔬 peer-reviewed Khan, Sulaiman, Newport, David, Le Calvé, Stéphane. 2019. "Development of a Toluene Detector Based on Deep UV Absorption Spectrophotometry Using Glass and Aluminum Capillary Tube Gas Cells with a LED Source." Micromachines 10 (3): 193. https://doi.org/10.3390/mi10030193. [DOI]
  • 📚 textbook Anonymous. 1989. "Some Applications of Uv and Vis Spectrophotometry." Studies in Analytical Chemistry: 260-303. https://doi.org/10.1016/b978-0-444-98882-9.50012-8. [DOI]
  • 📚 textbook Anonymous. 1989. "Basis of Spectrophotometry in the Uv and Vis Regions." Studies in Analytical Chemistry: 13-46. https://doi.org/10.1016/b978-0-444-98882-9.50005-0. [DOI]

REST: /wp-json/molgod/v1/spectra/uv-vis/108-88-3?solvent=water&path_length_cm=1

☣️ Toxizität (LD50 / LC50) GHS Kat. 5 — Sehr niedrigMolGod_LD50_1
LD50
5000 mg/kg
Gatunek / droga
Rat / doustnie
Klasyfikacja
Slightly toxic
Skala GHS (Acute Toxicity, oral, mg/kg bw):
Cat 1 (≤5)
Cat 2 (5–50)
Cat 3 (50–300)
Cat 4 (300–2000)
Cat 5 (2000–5000)

Quelle: RTECS XS5250000; U.S. EPA IRIS Toluene 2005 (2005). CAS 108-88-3.

LD50/LC50-Daten dienen nur zur Orientierung; sie ersetzen weder das Sicherheitsdatenblatt (SDS) noch eine toxikologische Expertenbewertung. GHS-Einstufung für den oralen Weg (mg/kg bw) gemäß UN GHS, 10. Rev. 2023, Anhang 1 §3.1.1.

Bibliografie (Chicago)
  • Hodge, Harold C., and James H. Sterner. 1949. "Tabulation of toxicity classes." American Industrial Hygiene Association Quarterly 10 (4): 93-96.
  • U.S. EPA. 2024. "ChemView." https://chemview.epa.gov/.
  • United Nations. 2023. "Globally Harmonized System of Classification and Labelling of Chemicals (GHS)." 10th rev. ed. New York: UN.
  • Lipnick, Robert L., et al. 1995. "Comparison of the up-and-down, conventional LD50, and fixed-dose acute toxicity procedures." Food and Chemical Toxicology 33 (3): 223-231.
  • ATSDR. 2024. "Toxicological Profiles." Agency for Toxic Substances and Disease Registry. https://www.atsdr.cdc.gov/.
  • Hayes, Wallace, and Claire L. Kruger, eds. 2014. "Hayes' Principles and Methods of Toxicology." 6th ed. CRC Press.
  • Lewis, Richard J. 2012. "Sax's Dangerous Properties of Industrial Materials." 12th ed. Wiley.
  • IARC. 2024. "Monographs on the Evaluation of Carcinogenic Risks to Humans." International Agency for Research on Cancer (per kryteria klasyfikacji rakotwórczości IARC Group 1/2A/2B).
  • Pohanish, Richard P. 2017. "Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens." 7th ed. Elsevier.
  • Bingham, Eula, Barbara Cohrssen, and Charles H. Powell, eds. 2012. "Patty's Toxicology." 6th ed. Wiley.
  • WHO. 2023. "Recommended Classification of Pesticides by Hazard." World Health Organization (zgodne z UN GHS Annex 1 §3.1.1).
🧪 Klassische Syntheserouten1 historische RouteMolGod_SYNTH_2

Historisch verifizierte Synthesewege. Zitate im Chicago-Author-Date-Stil.

Route 1: Catalytic reforming of naphtha (2004)
Namensreaktion: Catalytic reforming (Platforming)
Ausgangsstoffe: C6-C8 naphtha cut from crude oil distillation
Bedingungen: 500 C, 5-30 atm; Pt/Re/Al2O3 (UOP Platforming); H2 cofeed; aromatics extraction (Sulfolane)
Ausbeute: 60.0 %
Antos, George J., and Abdullah M. Aitani, eds. 2004. Catalytic Naphtha Reforming. 2nd ed. New York: Marcel Dekker.
Allgemeine Bibliographie (Chicago):
  • March, Jerry, and Michael B. Smith. 2020. "March's Advanced Organic Chemistry: Reactions, Mechanisms, and Structure." 8th ed. Wiley.
  • Carey, Francis A., and Richard J. Sundberg. 2007. "Advanced Organic Chemistry, Part B: Reactions and Synthesis." 5th ed. Springer.
  • Corey, E. J., and Xue-Min Cheng. 1995. "The Logic of Chemical Synthesis." Wiley.
  • Greene, Theodora W., and Peter G. M. Wuts. 2014. "Greene's Protective Groups in Organic Synthesis." 5th ed. Wiley.
  • Smith, Michael B. 2020. "Organic Synthesis." 4th ed. Academic Press.
  • Carey, Francis A., and Richard J. Sundberg. 2007. "Advanced Organic Chemistry, Part A: Structure and Mechanisms." 5th ed. New York: Springer.
  • Anslyn, Eric V., and Dennis A. Dougherty. 2006. Modern Physical Organic Chemistry. Sausalito, CA: University Science Books.
  • Bretherick, Leslie. 1990. Bretherick's Handbook of Reactive Chemical Hazards. 4th ed. London: Butterworths.
  • Urben, Peter, ed. 2017. Bretherick's Handbook of Reactive Chemical Hazards. 8th ed. Oxford: Butterworth-Heinemann.
  • Yoshida, Tadao, Yusaku Iwata, Hiroshi Itoh, and Mitsuru Arai. 2009. Safe Storage of Reactive Chemicals. New York: Plenum Press.
  • Mortimer, Charles E. 2005. Chemistry: A Conceptual Approach. 9th ed. Belmont, CA: Wadsworth.
  • Engel, Thomas, and Philip Reid. 2013. Physical Chemistry. 3rd ed. Boston: Pearson.
  • Steinfeld, Jeffrey I., Joseph S. Francisco, and William L. Hase. 1998. Chemical Kinetics and Dynamics. 2nd ed. Upper Saddle River, NJ: Prentice Hall.
  • Houston, Paul L. 2001. Chemical Kinetics and Reaction Dynamics. New York: McGraw-Hill.
  • Eyring, Henry. 1935. "The Activated Complex in Chemical Reactions." Journal of Chemical Physics 3 (2): 107–115. https://doi.org/10.1063/1.1749604.
  • Kresge, A. Jerry. 2001. "Reaction kinetics in 100-year-old laboratories." Chemical Society Reviews 30 (4): 197–200. https://doi.org/10.1039/B100445F.
  • Brönsted, J. N. 1929. "Acid and Basic Catalysis." Chemical Reviews 5 (3): 231–338. https://doi.org/10.1021/cr60019a001.
  • Larock, Richard C. 2018. Comprehensive Organic Transformations: A Guide to Functional Group Preparations. 3rd ed. Hoboken, NJ: John Wiley & Sons.
  • Mundy, Bradford P., Michael G. Ellerd, and Frank G. Favaloro Jr. 2005. Name Reactions and Reagents in Organic Synthesis. 2nd ed. Hoboken, NJ: Wiley-Interscience.
  • Li, Jie Jack. 2014. Name Reactions: A Collection of Detailed Mechanisms and Synthetic Applications. 5th ed. Heidelberg: Springer.
  • Kürti, László, and Barbara Czakó. 2005. Strategic Applications of Named Reactions in Organic Synthesis. Burlington, MA: Elsevier Academic Press.
  • Trost, Barry M., and Ian Fleming, eds. 1991. Comprehensive Organic Synthesis: Selectivity, Strategy, and Efficiency in Modern Organic Chemistry. 9 vols. Oxford: Pergamon Press.
  • Ojima, Iwao, ed. 2010. Catalytic Asymmetric Synthesis. 3rd ed. Hoboken, NJ: John Wiley & Sons.
  • Jacobsen, Eric N., Andreas Pfaltz, and Hisashi Yamamoto, eds. 1999. Comprehensive Asymmetric Catalysis. 3 vols. Berlin: Springer.
  • Hartwig, John F. 2010. Organotransition Metal Chemistry: From Bonding to Catalysis. Sausalito, CA: University Science Books.
  • Crabtree, Robert H. 2014. The Organometallic Chemistry of the Transition Metals. 6th ed. Hoboken, NJ: John Wiley & Sons.
  • Negishi, Ei-ichi, ed. 2002. Handbook of Organopalladium Chemistry for Organic Synthesis. 2 vols. New York: Wiley-Interscience.
  • de Meijere, Armin, and François Diederich, eds. 2004. Metal-Catalyzed Cross-Coupling Reactions. 2nd ed. 2 vols. Weinheim: Wiley-VCH.
  • Berkessel, Albrecht, and Harald Gröger. 2005. Asymmetric Organocatalysis: From Biomimetic Concepts to Applications in Asymmetric Synthesis. Weinheim: Wiley-VCH.
  • Dalko, Peter I., ed. 2007. Enantioselective Organocatalysis: Reactions and Experimental Procedures. Weinheim: Wiley-VCH.
  • List, Benjamin, Richard A. Lerner, and Carlos F. Barbas III. 2000. "Proline-catalyzed direct asymmetric aldol reactions." Journal of the American Chemical Society 122 (10): 2395–2396. https://doi.org/10.1021/ja994280y.
  • MacMillan, David W. C. 2008. "The advent and development of organocatalysis." Nature 455 (7211): 304–308. https://doi.org/10.1038/nature07367.
  • Noyori, Ryōji. 2002. "Asymmetric catalysis: science and opportunities (Nobel lecture)." Angewandte Chemie International Edition 41 (12): 2008–2022. https://doi.org/10.1002/1521-3773(20020617)41:12<2008::AID-ANIE2008>3.0.CO;2-4.
  • Sharpless, K. Barry. 2002. "Searching for new reactivity (Nobel lecture)." Angewandte Chemie International Edition 41 (12): 2024–2032. https://doi.org/10.1002/1521-3773(20020617)41:12<2024::AID-ANIE2024>3.0.CO;2-O.
  • Knowles, William S. 2002. "Asymmetric hydrogenations (Nobel lecture)." Angewandte Chemie International Edition 41 (12): 1998–2007. https://doi.org/10.1002/1521-3773(20020617)41:12<1998::AID-ANIE1998>3.0.CO;2-8.
  • Grubbs, Robert H. 2006. "Olefin-metathesis catalysts for the preparation of molecules and materials (Nobel lecture)." Angewandte Chemie International Edition 45 (23): 3760–3765. https://doi.org/10.1002/anie.200600680.
  • Schrock, Richard R. 2006. "Multiple metal-carbon bonds for catalytic metathesis reactions (Nobel lecture)." Angewandte Chemie International Edition 45 (23): 3748–3759. https://doi.org/10.1002/anie.200600085.
  • Suzuki, Akira. 2011. "Cross-coupling reactions of organoboranes: an easy way to construct C-C bonds (Nobel lecture)." Angewandte Chemie International Edition 50 (30): 6722–6737. https://doi.org/10.1002/anie.201101379.
  • Negishi, Ei-ichi. 2011. "Magical power of transition metals: past, present, and future (Nobel lecture)." Angewandte Chemie International Edition 50 (30): 6738–6764. https://doi.org/10.1002/anie.201101380.
  • List, Benjamin, and David W. C. MacMillan. 2022. "Asymmetric organocatalysis (Nobel lecture)." Angewandte Chemie International Edition 61 (38): e202205927. https://doi.org/10.1002/anie.202205927.
  • Bertozzi, Carolyn R., Morten Meldal, and K. Barry Sharpless. 2023. "Click chemistry and bioorthogonal chemistry (Nobel lectures)." Angewandte Chemie International Edition 62 (16): e202300332. https://doi.org/10.1002/anie.202300332.
  • Weissermel, Klaus, and Hans-Jürgen Arpe. 2003. Industrial Organic Chemistry. 4th ed. Weinheim: Wiley-VCH.
  • Wittcoff, Harold A., Bryan G. Reuben, and Jeffrey S. Plotkin. 2013. Industrial Organic Chemicals. 3rd ed. Hoboken, NJ: John Wiley & Sons.
  • Appl, Max. 2006. "Ammonia, 2. Production Processes." In Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. https://doi.org/10.1002/14356007.o02_o11.
  • Thiemann, Michael, Erich Scheibler, and Karl Wilhelm Wiegand. 2000. "Nitric Acid, Nitrous Acid, and Nitrogen Oxides." In Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. https://doi.org/10.1002/14356007.a17_293.
  • Hocking, Martin B. 2005. Handbook of Chemical Technology and Pollution Control. 3rd ed. Burlington, MA: Academic Press.
  • Corey, E. J., and László Kürti. 2010. Enantioselective Chemical Synthesis: Methods, Logic, and Practice. Direct Book Publishing.
  • Nicolaou, K. C., and E. J. Sorensen. 1996. Classics in Total Synthesis: Targets, Strategies, Methods. Weinheim: VCH.
  • Nicolaou, K. C., and Jason S. Chen. 2011. Classics in Total Synthesis III: Further Targets, Strategies, Methods. Weinheim: Wiley-VCH.
  • House, Herbert O. 1972. Modern Synthetic Reactions. 2nd ed. Menlo Park, CA: W. A. Benjamin.
  • Organic Syntheses, Inc. 2024. "Organic Syntheses Collective Volumes 1–10 (1932–2004) and Annual Volumes 1–100 (1922–2024)." Hoboken, NJ: Wiley. https://www.orgsyn.org/.
  • Paquette, Leo A., David Crich, Philip L. Fuchs, Gary A. Molander, and Andre B. Charette, eds. 2009. Encyclopedia of Reagents for Organic Synthesis (e-EROS). 2nd ed. Hoboken, NJ: Wiley. https://onlinelibrary.wiley.com/doi/book/10.1002/047084289X.
Erweiterte Bibliografie — 4 Quellen (PubMed/CrossRef/EuropePMC)
  • PUBLiu W; Xin S; Wang X; Zhang Y; Dai W; Li H. 2026. "Enhanced toluene catalytic oxidation over Ag-Cu co-modified Mn(2)O(3): the crucial roles of surface structure reconstruction process." Environmental research. https://doi.org/10.1016/j.envres.2026.124120.
  • PUBBen Attia T; Gannouni N; Galai S; Mhamdi A. 2025. "[Synergistic Effect of Noise and Toluene Upon Hematological Alterations, Pulmonary Oxidative Stress and Inflammation]." La Tunisie medicale. https://doi.org/10.62438/tunismed.v103i10.5718.
  • PUBZhou W; Feng F; Zhang J; Cao S; Zhou Y; Li Y. 2025. "pH-Sensitive Porphyrin Metal-Organic Frameworks for Controlled Delivery of Para-Toluenesulfonamide and Photodynamic Cancer Therapy." Drug design, development and therapy. https://doi.org/10.2147/DDDT.S504891.
  • PUBWei Z; Ni W; Mele G; Lü XF; Wang W; Jiang ZY. 2025. "Recyclable magnetic composites prepared by a novel reverse encapsulation reaction to increase benzene rings reactive sites for enhanced removal of 3,4-diaminotoluene: Theoretical prediction with experimental statistics." Environmental research. https://doi.org/10.1016/j.envres.2025.121140.
📤 Betten Sie dieses Molekül auf Ihrer Website ein

Haben Sie einen Blog, ein Forum oder einen wissenschaftlichen Dienst? Betten Sie das interaktive 3D-Molekül auf Ihrer Website ein — jeder Ihrer Leser sieht es, und darunter gibt es einen Link zu unserem Shop, wo er das Reagenz kaufen kann.

🔗 HTML-iframe-Code (am einfachsten — funktioniert überall)

Kopieren Sie ihn und fügen Sie ihn in den HTML-Editor Ihrer Website ein:

Passen Sie width und height an Ihr Layout an.

⚙ WordPress Shortcode (für andere Shops mit MOL-GOD)

🌐 Direktlink (für E-Mails, Chats, LinkedIn, Twitter)

LinkedIn Twitter/X Facebook
QR code CAS 108-88-3

📱 QR code (zum Druck auf Flyern / Etiketten / Katalogen)

Platzieren Sie ihn in einem Produktkatalog, auf einem Flaschenetikett oder einem Flyer. Der Kunde scannt ihn — sieht das 3D-Molekül auf seinem Telefon, mit einem Link zu Ihrem Shop.

⬇ PNG herunterladen

🖼 Open Graph image (für Social-Media-Meta-Tags)

Wenn Sie den Link teilen, ruft Facebook/LinkedIn/Discord automatisch die Bildvorschau ab:

Preview
📋 Lizenz: Der Embed behält einen Backlink zu DH Scientific (erforderlich — der Shop ist die Datenquelle). Chemische Daten stammen von PubChem (CC0 — gemeinfrei). Der Embed ist KOSTENLOS für Bildungs-, kommerzielle und Hobbyzwecke.
📚 REFERENZEN (Gesammelte Bibliografie, Chicago Author-Date) 108 Einträge

Alle wissenschaftlichen Quellen, die in den Akkordeons oben für CAS 108-88-3 zitiert werden.Format: Chicago Manual of Style, 17. Aufl., Autor-Datum-System.

🗄️ Wissenschaftliche Datenbanken

  1. NIST. 2026. NIST Chemistry WebBook: CAS 108-88-3. Gaithersburg, MD: National Institute of Standards and Technology. https://webbook.nist.gov/cgi/cbook.cgi?ID=108-88-3. (Accessed 2026-11-12.)
  2. AIST. 2026. Spectral Database for Organic Compounds (SDBS): CAS 108-88-3. Tsukuba, Japan: National Institute of Advanced Industrial Science and Technology. https://sdbs.db.aist.go.jp/. (Accessed 2026-11-12.)
  3. PubChem. 2026. PubChem Compound Summary: CAS 108-88-3. Bethesda, MD: National Center for Biotechnology Information (NCBI), National Library of Medicine. https://pubchem.ncbi.nlm.nih.gov/#query=108-88-3. (Accessed 2026-11-12.)
  4. ECHA. 2026. C&L Inventory and REACH Registration: CAS 108-88-3. Helsinki: European Chemicals Agency. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp. (Accessed 2026-11-12.)

📐 Standards / Richtlinien

  1. ICH. 2026. "ICH Harmonised Guideline: CAS 108-88-3." Geneva: International Council for Harmonisation. https://database.ich.org/sites/default/files/Q1A%28R2%29%20Guideline.pdf. (Accessed 2026-11-12.)
  2. National Fire Protection Association (NFPA). 2024. "NFPA 30: Flammable and Combustible Liquids Code." NFPA, Quincy, MA. https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=30.
  3. Occupational Safety and Health Administration (OSHA). 2023. "29 CFR 1910.106 — Flammable Liquids." U.S. Department of Labor, Federal Register. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.106.
  4. European Chemicals Agency (ECHA). 2024. "Annex VI to Regulation (EC) No 1272/2008 (CLP) — Harmonised Classification and Labelling." ECHA, Helsinki / Official Journal of the European Union. https://echa.europa.eu/regulations/clp/clp-classification.
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=205:110:::::FSP_PROJECT,FSP_ORG_ID:38536,6080&cs=1B0DAA8B85DF42E4A2C70E5D71F0BFA32.
  6. European Committee for Standardization (CEN). 2001. "EN 166:2001 — Personal eye-protection — Specifications." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:6541&cs=1F1A4E0A78C4DB6A28DBE2E8C29D89DCF.
  7. European Committee for Standardization (CEN). 2009. "EN 14605:2005+A1:2009 — Protective clothing against liquid chemicals — Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:21581&cs=1A04A2D3C7CC58E9E6CB58D55F7EBFB7E.
  8. National Institute for Occupational Safety and Health (NIOSH). 2017. "Recommendations for Chemical Protective Clothing: A Companion to the NIOSH Pocket Guide." U.S. Department of Health & Human Services / CDC. https://www.cdc.gov/niosh/ncpc/default.html.
  9. Occupational Safety and Health Administration (OSHA). 2011. "Personal Protective Equipment — General requirements." U.S. Department of Labor — 29 CFR 1910.132. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.132.

📖 Bücher

  1. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook, 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/Hansen-Solubility-Parameters-A-Users-Handbook/Hansen/p/book/9780849372483.
  2. Barton, Allan F. M. 1991. CRC Handbook of Solubility Parameters and Other Cohesion Parameters: 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/CRC-Handbook-of-Solubility-Parameters-and-Other-Cohesion-Parameters/Barton/p/book/9780849301766.
  3. Connors, Kenneth A., Gordon L. Amidon, and Valentino J. Stella. 1986. Chemical Stability of Pharmaceuticals: A Handbook for Pharmacists, 2nd ed.. New York: Wiley. https://doi.org/10.1002/0471734683.
  4. Rumble, John R., ed. 2019. CRC Handbook of Chemistry and Physics: 100th Edition. Boca Raton, FL: CRC Press. https://hbcp.chemnetbase.com/.
  5. Urben, Peter G. 2017. Bretherick's Handbook of Reactive Chemical Hazards, 8th Edition. Academic Press / Elsevier, Oxford. https://www.sciencedirect.com/book/9780081010594.

📘 Monografien

  1. IARC. 2026. IARC Monographs on the Identification of Carcinogenic Hazards to Humans: CAS 108-88-3. Lyon, France: International Agency for Research on Cancer, World Health Organization. https://monographs.iarc.who.int/list-of-classifications/. (Accessed 2026-11-12.)

📄 Wissenschaftliche Artikel (peer-reviewed)

  1. Stefanis, Emmanuel, and Costas Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." International Journal of Thermophysics 29: 568-585. https://doi.org/10.1007/s10765-008-0415-z.
  2. Stoll, Vincent S., and John S. Blanchard. 1990. "Buffers: Principles and Practice: In Methods in Enzymology, vol. 182." San Diego: Academic Press. https://doi.org/10.1016/0076-6879(90)82008-P.

🌐 Websites

  1. ECHA. 2023. "Guidance on the Application of the CLP Criteria." European Chemicals Agency. https://echa.europa.eu/guidance-documents/guidance-on-clp.
  2. European Parliament. 2006. "Regulation (EC) No 1907/2006 (REACH)." Official Journal of the European Union L 396: 1–849.
  3. ECHA. 2023. "Candidate List of Substances of Very High Concern for Authorisation." European Chemicals Agency. https://echa.europa.eu/candidate-list-table.
  4. European Parliament. 2008. "Regulation (EC) No 1272/2008 on Classification, Labelling and Packaging of Substances and Mixtures (CLP)." Official Journal of the European Union L 353: 1–1355.
  5. ECHA. 2017. "Guidance on the Compilation of Safety Data Sheets." Version 3.1. European Chemicals Agency. ECHA-17-G-01-EN. https://echa.europa.eu/documents/10162/23047722/sds_en.pdf.
  6. ECHA. 2022. "Restrictions Under REACH — Annex XVII." European Chemicals Agency. https://echa.europa.eu/substances-restricted-under-reach.
  7. United Nations. 2021. Globally Harmonized System of Classification and Labelling of Chemicals (GHS). 9th revised ed. ST/SG/AC.10/30/Rev.9. New York and Geneva: United Nations. https://unece.org/ghs-rev9-2021.
  8. ECHA. 2020. "Understanding REACH." European Chemicals Agency. https://echa.europa.eu/regulations/reach/understanding-reach.
  9. Reid, Prausnitz, Poling 4th ed. (1987). 2026. "Reid, Prausnitz, Poling 4th ed. (1987): CAS 108-88-3." (Accessed 2026-11-12.)
  10. U.S. OSHA. 2026. "Occupational Safety and Health Guidance: CAS 108-88-3." Washington, DC: U.S. Occupational Safety and Health Administration. https://www.osha.gov/hazwoper. (Accessed 2026-11-12.)
  11. National Fire Protection Association (2018) — NFPA 472: Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents https://www.nfpa.org/codes-and-standards/nfpa-472.
  12. European Union. 2026. "EUR-Lex Legal Database: CAS 108-88-3." Luxembourg: Publications Office of the European Union. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex:32012L0018. (Accessed 2026-11-12.)
  13. U.S. National Institute for Occupational Safety and Health (2024) — NIOSH Pocket Guide to Chemical Hazards https://www.cdc.gov/niosh/npg/.
  14. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley.
  15. Schoenmakers, Peter J.. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier.
  16. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley.
  17. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. https://doi.org/10.1016/j.chroma.2008.10.005.
  18. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094.
  19. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793.
  20. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. https://doi.org/10.1002/jssc.200700026.
  21. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199. https://www.chromatographyonline.com/view/when-modify-method-conditions.
  22. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. Wiley.
  23. Engelhardt, Heinz. 2014. 100 Years of Chromatography. Wiley-VCH.
  24. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531. https://doi.org/10.1021/ac101742z.
  25. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." https://doi.org/10.1016/0009-2509(56)80003-1.
  26. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory." Marcel Dekker.
  27. Poppe, Hans. 1997. "Some reflections on speed and efficiency of modern chromatographic methods." https://doi.org/10.1016/S0021-9673(97)00376-2.
  28. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." https://doi.org/10.1002/jssc.200700026.
  29. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." https://doi.org/10.1016/j.chroma.2008.11.094.
  30. Knox, John H.. 1977. "Practical aspects of LC theory." https://doi.org/10.1093/chromsci/15.9.352.
  31. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. "Practical HPLC Method Development." Wiley.
  32. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." https://doi.org/10.1021/ac101742z.
  33. Sadek, Paul C.. 2002. "The HPLC Solvent Guide." Wiley-Interscience.
  34. Snyder, L. R.. 1978. "Classification of the solvent properties of common liquids." https://doi.org/10.1093/chromsci/16.6.223.
  35. Reichardt, Christian, and Thomas Welton. 2010. "Solvents and Solvent Effects in Organic Chemistry." Wiley-VCH.
  36. Vailaya, Anant, and Csaba Horváth. 1998. "Retention thermodynamics in hydrophobic interaction chromatography." https://doi.org/10.1021/ie980212h.
  37. Krstulović, Andrea M., and Phyllis R. Brown. 1981. "Reversed-phase High-Performance Liquid Chromatography." Wiley.
  38. Boysen, Reinhard I., and Milton T. W. Hearn. 2009. "Multi-modal HPLC of proteins." https://doi.org/10.1093/chromsci/47.8.645.
  39. USP General Chapter <621>. 2024. "Chromatography." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  40. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." https://doi.org/10.1021/ac00255a033.
  41. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." Wiley. https://doi.org/10.1002/9780470508183.
  42. Dolan, John W.. 2003. "Peak tailing and resolution." https://www.chromatographyonline.com/view/peak-tailing-and-resolution.
  43. Kromidas, Stavros. 2017. "HPLC Made to Measure: A Practical Handbook for Optimization." Wiley-VCH.
  44. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." https://doi.org/10.1016/j.jchromb.2008.10.052.
  45. United States Pharmacopeial Convention. 2024. "USP <621> Chromatography." In United States Pharmacopeia and National Formulary, USP 47-NF 42. Rockville, MD: USP. https://www.uspnf.com/.
  46. European Pharmacopoeia Commission. 2024. "2.2.46 Chromatographic Separation Techniques." In European Pharmacopoeia, 11th ed. Strasbourg: Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  47. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories." Geneva: ISO. https://www.iso.org/standard/66912.html.
  48. Kolthoff, Izaak Maurits, and Philip J. Elving, eds. 1978. Treatise on Analytical Chemistry, Part I: Theory and Practice. 2nd ed. New York: Wiley-Interscience.
  49. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2018. Principles of Instrumental Analysis. 7th ed. Boston: Cengage Learning.
  50. Christian, Gary D., Purnendu K. Dasgupta, and Kevin A. Schug. 2014. Analytical Chemistry. 7th ed. Hoboken, NJ: Wiley.
  51. EURACHEM/CITAC. 2012. "Quantifying Uncertainty in Analytical Measurement." 3rd ed. EURACHEM/CITAC Guide CG 4. https://www.eurachem.org/images/stories/Guides/pdf/QUAM2012_P1.pdf.
  52. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." John Wiley & Sons. https://doi.org/10.1002/9780470508183.
  53. Dolan, John W.. 2003. "How much resolution is enough?." https://www.chromatographyonline.com/view/how-much-resolution-enough.
  54. USP General Chapter <621>. 2024. "Chromatography (System Suitability section)." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  55. U.S. FDA. 2026. "FDA Guidance and Resources: CAS 108-88-3." Silver Spring, MD: U.S. Food and Drug Administration. https://www.fda.gov/media/74954/download. (Accessed 2026-11-12.)
  56. Rozet, Eric, et al.. 2013. "Analysis of recent pharmaceutical regulatory documents on analytical method validation." https://doi.org/10.1016/j.chroma.2007.03.111.
  57. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  58. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience. https://doi.org/10.1002/9780470087954.
  59. AOAC International. 2016. "Appendix F: Guidelines for Standard Method Performance Requirements." AOAC INTERNATIONAL. https://www.aoac.org/wp-content/uploads/2019/08/app_f.pdf.
  60. International Organization for Standardization. 1994. "ISO 5725-2:1994 Accuracy (Trueness and Precision) of Measurement Methods and Results — Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method." Geneva: ISO. https://www.iso.org/standard/11834.html.
  61. Grubbs, Frank E. 1950. "Sample Criteria for Testing Outlying Observations." Annals of Mathematical Statistics 21 (1): 27–58.
  62. Dixon, Wilfrid J. 1950. "Analysis of Extreme Values." Annals of Mathematical Statistics 21 (4): 488–506.
  63. Snedecor, George W., and William G. Cochran. 1989. Statistical Methods. 8th ed. Ames, IA: Iowa State University Press.
  64. Student [William Sealy Gosset]. 1908. "The Probable Error of a Mean." Biometrika 6 (1): 1–25.
  65. International Organization for Standardization. 2005. "ISO 3534-1:2006 Statistics — Vocabulary and Symbols — Part 1: General Statistical Terms and Terms Used in Probability." Geneva: ISO. https://www.iso.org/standard/40145.html.
  66. Thompson, Michael, Stephen L. R. Ellison, and Roger Wood. 2002. "Harmonized Guidelines for Single-Laboratory Validation of Methods of Analysis." Pure and Applied Chemistry 74 (5): 835–855.
  67. United Nations Economic Commission for Europe. 2024. European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR), Applicable as from 1 January 2025 (ECE/TRANS/352). Geneva: UNECE. https://unece.org/transport/dangerous-goods/adr-2025-edition.
  68. International Air Transport Association. 2026. Dangerous Goods Regulations (DGR). 67th ed. Montreal: IATA. https://www.iata.org/en/programs/cargo/dgr/.
  69. International Maritime Organization. 2024. International Maritime Dangerous Goods (IMDG) Code, 2024 Edition (Amendment 42-24). London: IMO. https://www.imo.org/en/OurWork/Safety/Pages/DangerousGoods-default.aspx.
  70. United Nations. 2025. Recommendations on the Transport of Dangerous Goods: Model Regulations (Orange Book). 24th revised ed. ST/SG/AC.10/1/Rev.24. New York and Geneva: United Nations. https://unece.org/transport/dangerous-goods/un-model-regulations.
  71. International Civil Aviation Organization. 2025. Technical Instructions for the Safe Transport of Dangerous Goods by Air (Doc 9284). 2025–2026 ed. Montreal: ICAO. https://www.icao.int/safety/DangerousGoods/Pages/technical-instructions.aspx.
  72. United States Pharmacopeia (USP) Convention. 2024. "USP General Chapter <621> Chromatography." USP. https://www.usp.org/sites/default/files/usp/document/harmonization/gen-chapter/g05_pf_30_4_2004.pdf.
  73. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA Committee for Medicinal Products for Human Use. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  74. Sejm RP. 2026. "Internetowy System Aktow Prawnych (ISAP): CAS 108-88-3." Warszawa: Kancelaria Sejmu Rzeczypospolitej Polskiej. https://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20200000010. (Accessed 2026-11-12.)
  75. Ministerstwo Klimatu i Srodowiska. 2026. "Baza Danych o Odpadach (BDO): CAS 108-88-3." Warszawa: Ministerstwo Klimatu i Srodowiska. https://bdo.mos.gov.pl/. (Accessed 2026-11-12.)
  76. Pohanish, Richard P.. 2017. "Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens." Elsevier.
  77. Lewis, Richard J.. 2012. "Sax's Dangerous Properties of Industrial Materials." Wiley.
  78. NIOSH. 2024. "Pocket Guide to Chemical Hazards." U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/npg/.
  79. United Nations Economic Commission for Europe (UNECE). 2023. "European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." UNECE. https://unece.org/transport/standards/transport/dangerous-goods/adr-2025.
  80. IPCS INCHEM. 2024. "International Programme on Chemical Safety — Waste Management Guidelines." WHO/UNEP/ILO. https://www.inchem.org/.
  81. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories." ISO. https://www.iso.org/standard/66912.html.
  82. World Health Organization. 2010. "WHO Good Manufacturing Practices for Pharmaceutical Products: Main Principles (WHO Technical Report Series No. 957, Annex 3)." WHO Press. https://www.who.int/publications/m/item/trs957-annex3.
  83. European Medicines Agency. 2014. "Guideline on Process Validation for Finished Products — Information and Data to Be Provided EMA/CHMP/CVMP/QWP/BWP/70278/2012." European Medicines Agency. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-process-validation-finished-products-information-data-be-provided-regulatory-submissions-revision-1_en.pdf.
  84. United States Pharmacopeial Convention. 2024. "United States Pharmacopeia and National Formulary, USP 47-NF 42." USP. https://www.uspnf.com/.
  85. European Pharmacopoeia Commission. 2024. "European Pharmacopoeia 11th Edition." Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  86. Pharmaceutical Inspection Co-operation Scheme (PIC/S). 2021. "Guide to Good Manufacturing Practice for Medicinal Products PE 009-15." PIC/S Secretariat, Geneva. https://picscheme.org/en/publications.
  87. International Pharmaceutical Excipients Council (IPEC) and Pharmaceutical Quality Group (PQG). 2017. "Joint IPEC-PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients." IPEC-Americas. https://ipecamericas.org/sites/default/files/IPECPQGGMPGuide2017.pdf.
📥 BibTeX herunterladen📥 RIS herunterladenImport in Zotero/Mendeley/EndNote/Papers.