Bisphenol A — Etikett CAS 80-05-7

Bisphenol A

EU SVHCMolGod-Score: Primär

9,99 €

Chemisches Reagenz Bisfenol A (CAS 80-05-7). Vollständige enzyklopädische Karte — Klassifizierung, Eigenschaften und Sicherheitsdaten — unten.

🔒 Demomodus — dieser Artikel steht nicht zum Verkauf.

Legale Substanz. dhscientific.com ist eine Demonstration der MOL-GOD-Plattform — wir verkaufen nichts und es werden keine Bestellungen ausgeführt. Verbotene Substanzen werden hier automatisch anhand des regulatorischen Kanons blockiert (vgl. z. B. Heptachlor).

Prüfung Ihres Sicherheitsdatenblatts — kostenlos → · Kontakt

MolGod_SDSCARD_1
REACH 2020/878
v2 · 21.07.2026
Category:
🧬 3D-Molekül-Visualisierer
Molekül wird geladen...
3D-Modell Bisphenol A, CAS 80-05-7, Summenformel C15H16O2, molare Masse 228.29 g/mol
Chemische Übersicht: Bisphenol AMolGod_OVERVIEW_1
SummenformelC15H16O2
Molekulargewicht228.29 g/mol
Schmelzpunkt156.11 °C
Siedepunkt220 °C
Dichte1.2 g/cm³
LogP (Lipophilie)3.3
IUPAC-Name4-[2-(4-hydroxyphenyl)propan-2-yl]phenol
SMILESCC(C)(C1=CC=C(C=C1)O)C2=CC=C(C=C2)O
InChIKeyIISBACLAFKSPIT-UHFFFAOYSA-N

Synonyme: Bisphenol A · 80-05-7 · 2,2-Bis(4-hydroxyphenyl)propane · Bisphenol · Diano

Datenquellen: PubChem (NLM/NIH)
Zuletzt aktualisiert: 2026-11-10

WISSENSCHAFTLICHE FORSCHUNG

[1]PubMed2025
Protective Effect of Melatonin Against Bisphenol A Toxicity.
Joo SS, Yoo YM. (2025). "Protective Effect of Melatonin Against Bisphenol A Toxicity.". International journal of molecular sciences. https://doi.org/10.3390/ijms26157526
Zur vollständigen Studie ↗
[2]PubMed2025
Environmental endocrine disruptors and breast cancer: The role of bisphenols, polychlorinated biphenyls, parabens, and dioxins.
Sánchez-Ocaña M, Ruiz de Porras V. (2025). "Environmental endocrine disruptors and breast cancer: The role of bisphenols, polychlorinated biphenyls, parabens, and dioxins.". Environmental toxicology a
Zur vollständigen Studie ↗
[3]PubMed2025
Bisphenol A and human fertility: a systematic review.
Isa CPM, Schmidt GB, Jesus RG et al.. (2025). "Bisphenol A and human fertility: a systematic review.". JBRA assisted reproduction. https://doi.org/10.5935/1518-0557.20250029
Zur vollständigen Studie ↗
[4]OpenAlex2021
Elucidation of the Effects of Bisphenol A and Structural Analogs on Germ and Steroidogenic Cells Using Single Cell…
Abishankari Rajkumar, Trang Luu, Marc A. Beal et al.. (2021). "Elucidation of the Effects of Bisphenol A and Structural Analogs on Germ and Steroidogenic Cells Using Single Cell High-Content Imaging".
Zur vollständigen Studie ↗
[5]Doaj2008
Toxicokinetics of Bisphenol A ‐ Scientific Opinion of the Panel on Food additives, Flavourings, Processing aids and Materials…
European Food Safety Authority (EFSA). (2008). "Toxicokinetics of Bisphenol A ‐ Scientific Opinion of the Panel on Food additives, Flavourings, Processing aids and Materials in Contact with Food (AFC)
Zur vollständigen Studie ↗
📚 Wissenschaftliche Referenzen (Chicago Author-Date) 5 refs · 4 baz

MOLEKUŁA Bibliografie pro CAS (live aus 13+ Datenbanken)

Quellen: db:pubmed (3) · db:openalex (1) · db:doaj (1)

  1. db:pubmed Joo SS, Yoo YM. (2025). "Protective Effect of Melatonin Against Bisphenol A Toxicity.". International journal of molecular sciences. https://doi.org/10.3390/ijms26157526 →
  2. db:pubmed Sánchez-Ocaña M, Ruiz de Porras V. (2025). "Environmental endocrine disruptors and breast cancer: The role of bisphenols, polychlorinated biphenyls, parabens, and dioxins.". Environmental toxicology and pharmacology. https://doi.org/10.1016/j.etap.2025.104834 →
  3. db:pubmed Isa CPM, Schmidt GB, Jesus RG et al.. (2025). "Bisphenol A and human fertility: a systematic review.". JBRA assisted reproduction. https://doi.org/10.5935/1518-0557.20250029 →
  4. db:openalex Abishankari Rajkumar, Trang Luu, Marc A. Beal et al.. (2021). "Elucidation of the Effects of Bisphenol A and Structural Analogs on Germ and Steroidogenic Cells Using Single Cell High-Content Imaging". Toxicological Sciences. https://doi.org/10.1093/toxsci/kfab012 →
  5. db:doaj European Food Safety Authority (EFSA). (2008). "Toxicokinetics of Bisphenol A ‐ Scientific Opinion of the Panel on Food additives, Flavourings, Processing aids and Materials in Contact with Food (AFC)". EFSA Journal. https://doi.org/10.2903/j.efsa.2008.759 →
📊 Physikochemische Eigenschaften

Kurzübersicht

Formel: C15H16O2
MW: 228.29 g/mol
CAS: 80-05-7
Aussehen: Crystallizes as prisms from dil acetic acid and as needles from water
Geruch: Mild phenolic odor
Geruch: Mild phenolic odor

Detaillierte Eigenschaften

Eigenschaft Wert Einheit Bedingungen Quelle
Dichte (ρ) 1.2000 g/cm³ 20 °C (68 °F)
Schmelzpunkt (mp) 156.11 °C (313 °F) 1 atm
Siedepunkt (bp) 428 °F at 4 mmHg (NTP, 1992) PubChem (NIH/NLM) ↗
Flammpunkt 175 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Dampfdruck 0.2 mmHg at 338 °F ; 1 mmHg at 379.4 °F (NTP, 1992) PubChem (NIH/NLM) ↗
Wasserlöslichkeit less than 1 mg/mL at 70.7 °F (NTP, 1992) PubChem (NIH/NLM) ↗
🔬 Erweiterte Eigenschaften

Chemische Kennungen

SMILES: CC(C)(C1=CC=C(C=C1)O)C2=CC=C(C=C2)O
InChI: InChI=1S/C15H16O2/c1-15(2,11-3-7-13(16)8-4-11)12-5-9-14(17)10-6-12/h3-10,16-17H,1-2H3
InChIKey: IISBACLAFKSPIT-UHFFFAOYSA-N

Datenquellen: PubChem, NIST Chemistry WebBook, CRC Handbook of Chemistry and Physics (103rd ed.)

Zuletzt aktualisiert: 2026-06-30

Regulatorischer Status der Substanz
Diese Verbindung: ist in der SVHC-Kandidatenliste aufgeführt (REACH Art. 59). Verzeichnisse: EU/SVHC. Regulatorische Information — schränkt den Kauf in diesem Shop nicht ein.
🧮 Stöchiometrie-RechnerMolGod_STOICH_1
🔍 Externe IdentifikatorenMolGod_EXTID_1
14 von 16 ID-Systemen88%
DatenbankIdentifikatorAktionen
CAS Registry Number80-05-7Öffnen →
PubChem CID6623Öffnen →
InChIKeyIISBACLAFKSPIT-UHFFFAOYSA-NÖffnen →
InChIInChI=1S/C15H16O2/c1-15(2,11-3-7-13(16)8-4-11)12…
SMILESCC(C)(C1=CC=C(C=C1)O)C2=CC=C(C=C2)O
EC Number201-245-8Öffnen →
DrugBankDB06973Öffnen →
KEGG CompoundC13624Öffnen →
HMDBHMDB0032133Öffnen →
ChemSpider6371Öffnen →
MeSH UID (NLM)C006780Öffnen →
UNII (FDA)MLT3645I99Öffnen →
NSC Number (NCI)1767Öffnen →
WikiData QIDQ271980Öffnen →

Quellen: PubChem (NIH), Wikidata SPARQL, KEGG, ChEMBL (EBI), CompTox CTX (EPA).

📡 Spektroskopie — CAS 80-05-7MolGod_SPECHUB_MAIN
📊 Spektren (NMR, IR, MS, UV-Vis) (1)

Verfügbare Spektrentypen: IR

IR-Spektrum (KBr, 4000-400 cm⁻¹)

440 Datenpunkte · Quelle: NIST WebBook · NIST ↗ · 📥 JCAMP-DX
📋 Peak-Tabelle (Peak Assignment)
Type Position Intensität Zuordnung
IR 450 0 —
IR 458 0 —
IR 466 0 —
IR 474 0 —
IR 482 0 —
IR 490 0 —
IR 498 0.1 —
IR 506 0.1 —
IR 514 0 —
IR 522 0 —
IR 530 0 —
IR 538 0 —
IR 546 0 —
IR 554 0 —
IR 562 0 —
IR 570 0 —
IR 578 0 —
IR 586 0 —
IR 594 0 —
IR 602 0 —
🎓 Leitfaden zur Spektreninterpretation (für Studierende)
Wie man ein IR-Spektrum liest
  • 3200-3600 cm⁻¹ — O-H-Streckschwingung (breiter Peak = Wasserstoffbrücke)
  • 2850-3000 cm⁻¹ — C-H-Streckschwingung (sp³)
  • 1650-1750 cm⁻¹ — C=O-Streckschwingung (Ketone, Aldehyde, Ester)
  • 1400-1600 cm⁻¹ — Schwingungen des aromatischen Rings
  • 1000-1300 cm⁻¹ — C-O-Streckschwingung (Ether, Alkohole)
  • Keine Absorption = keine funktionelle Gruppe → mit einer Referenz vergleichen

Quellen: LibreTexts ↗, Silverstein (Spectrometric ID) ↗

📚 Wissenschaftliche Referenzen (Chicago Author-Date) (9 Quellen)

📚 Die Buch-Bibliografie wartet auf ihre Erstellung. Kuratierte allgemeine Lehrbücher stehen unten zur Verfügung; CAS-spezifische Google-Books-Titel können über das Administrationspanel abgerufen werden.

  1. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  2. Spectral Database for Organic Structure Determination (SDBS). 2024. National Institute of Advanced Industrial Science and Technology (AIST), Japan. Accessed 2025-01-01. ↗
  3. Ulrich, Eldon L., Hideo Akutsu, John F. Doreleijers, Yoko Harano, Yannis E. Ioannidis, Jundong Lin, Miron Livny, et al. 2008. "BioMagResBank." Nucleic Acids Research 36 (D1): D402–D408. [DOI ↗]
  4. Horai, Hisayuki, Masanori Arita, Shigehiko Kanaya, Yoshito Nihei, Tasuku Ikeda, Kazuhiro Suwa, Yuya Ojima, et al. 2010. "MassBank: A Public Repository for Sharing Mass Spectral Data for Life Sciences." Journal of Mass Spectrometry 45 (7): 703–714. [DOI ↗]
  5. Linstrom, P.J., and W.G. Mallard, eds. 2024. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. ↗
  6. McDonald, M. Shane, Mike McAvoy, and Ajit Bhalerao. 1988. "JCAMP-DX: A Standard Form for Exchange of Infrared Spectra in Computer Readable Form." Applied Spectroscopy 42 (1): 151–162. [DOI ↗]
  7. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
📐 Physikalisch-chemische Eigenschaften (DB) 5 Felder MolGod-Score: Keine Quelle
Eigenschaft Wert Einheit Bedingungen Quelle
Schmelzpunkt 156.11 °C 1 atm
Siedepunkt 220.00 °C 760 mmHg
Wasserlöslichkeit 0.300 g/L 25°C
Dichte (ρ) 1.2000 g/cm³ 20°C
logP (Octanol/Wasser) 3.300 — 25°C
📚 Wissenschaftliche Referenzen (Chicago Author-Date) (12 Quellen)
  1. Haynes, William M., ed. 2024. CRC Handbook of Chemistry and Physics. 105th ed. Boca Raton: CRC Press/Taylor & Francis. ISBN 978-1-032-55554-4. ↗
  2. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  3. Yaws, Carl L. 2014. The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals. 2nd ed. Oxford: Gulf Professional Publishing.
  4. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
  5. Marrero, J., and R. Gani. 2001. "Group-Contribution Based Estimation of Pure Component Properties." Fluid Phase Equilibria 183–184: 183–208. ↗
  6. Joback, K. G., and R. C. Reid. 1987. "Estimation of Pure-Component Properties from Group-Contributions." Chemical Engineering Communications 57 (1–6): 233–243. ↗
  7. Sangster, J. 1997. Octanol-Water Partition Coefficients: Fundamentals and Physical Chemistry. Chichester: Wiley. ISBN 978-0-471-97397-3.
  8. Mannhold, Raimund, and Han van de Waterbeemd. 2001. "Substructure and Whole Molecule Approaches for Calculating Log P." Journal of Computer-Aided Molecular Design 15 (4): 337–354. ↗
  9. Perrin, Ditlev D., Boyd Dempsey, and E. P. Serjeant. 1981. pKa Prediction for Organic Acids and Bases. London: Chapman and Hall. ISBN 0-412-21090-5.
  10. Constantinou, Leonidas, and Rafiqul Gani. 1994. "New Group Contribution Method for Estimating Properties of Pure Compounds." AIChE Journal 40 (10): 1697–1710. ↗
  11. Ertl, Peter, Bernhard Rohde, and Paul Selzer. 2000. "Fast Calculation of Molecular Polar Surface Area as a Sum of Fragment-Based Contributions and Its Application to the Prediction of Drug Transport Properties." Journal of Medicinal Chemistry 43 (20): 3714–3717. ↗
🔄 Umrechner für Konzentrationseinheiten LIVE MolGod_UNITCONV_1

Geben Sie die Konzentration Bisphenol A in einer beliebigen Einheit ein — der Rest wird automatisch berechnet.

MW: 228.29 g/mol · IUPAC Gold Book ↗

⚗️ Umrechnungsformeln + Zitate (pro Formel)
UmrechnungFormelGenauigkeitQuelle
% (w/v) ↔ molarityc (mol/L) = (% × 10) / MW±0.5% rel. when density ≈ 1.0 g/mLIUPAC (2019)
millimolar ↔ molarc (mol/L) = mM × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
molarity (mol/L)c = n/V = (m/MW)/V±0.1% (depends on MW precision)IUPAC (2019)
parts per million (mg/L) ↔ molarityc (mol/L) = ppm / (1000 × MW); equivalently ppm = mg/L for dilute aqueous±1% (density-independent for dilute solutions)IUPAC (2019)
mg/mL ↔ molarityc (mol/L) = (mg/mL × 1000) / MW / 1000 = mg/mL / MW × 1±0.2%Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
g/L ↔ molarityc (mol/L) = (g/L) / MW±0.1% (depends on MW precision)Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
mmol/L ↔ molarityc (mol/L) = mmol/L × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
Celsius ↔ KelvinT(K) = t(°C) + 273.15±0.01 K (ITS-90 scale)BIPM (Bureau International des Poids et Mesures) (2019)
Celsius ↔ FahrenheitT(°F) = T(°C) × 9/5 + 32±0.1 °FThompson A, Taylor BN (2008)
density-corrected % ↔ molarityc (mol/L) = (%w/w × ρ × 10) / MW, ρ in g/mL±0.1% when ρ known to 3 decimalsCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
📚 Bibliographie (8 autoritative Quellen)
  1. Thompson A, Taylor BN (2008). Guide for the Use of the International System of Units (SI). NIST Special Publication 811 · DOI: 10.6028/NIST.SP.811-2008
    → Primary SI standard for US scientific usage
  2. Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007). Quantities, Units and Symbols in Physical Chemistry — The IUPAC Green Book. RSC Publishing, 3rd ed. · DOI: 10.1039/9781847557889 · ISBN: 978-0-85404-433-7
    → Canonical IUPAC guide for chemistry quantities/units
  3. BIPM (Bureau International des Poids et Mesures) (2019). The International System of Units (SI), 9th edition. BIPM · ↗
    → International SI definitions (incl. redefined kilogram 2019)
  4. ISO/IEC (2022). Quantities and units — Part 1: General. International Organization for Standardization — ISO 80000-1:2022 · ↗
    → General rules for physical quantities and units
  5. ISO/IEC (2019). Quantities and units — Part 9: Physical chemistry and molecular physics. International Organization for Standardization — ISO 80000-9:2019 · ↗
    → Concentration / molality / amount-of-substance conventions
  6. Tiesinga E, Mohr PJ, Newell DB, Taylor BN (2021). CODATA recommended values of the fundamental physical constants: 2018. Rev. Mod. Phys. 93(2):025010 · DOI: 10.1103/RevModPhys.93.025010
    → Avogadro, gas constant, molar volume (2019 SI revision)
  7. IUPAC (2019). Compendium of Chemical Terminology — the IUPAC Gold Book (online). IUPAC · DOI: 10.1351/goldbook
    → Definitions of mass fraction, molality, normality, ppm, activity
  8. Mills IM, Cvitaš T, Homann K, Kallay N, Kuchitsu K (1988). Quantities, Units and Symbols in Physical Chemistry. Blackwell Scientific Publications, 1st ed. · ISBN: 0-632-01773-5
    → Historical predecessor of IUPAC Green Book
🧪 Assistent zur Lösungsvorbereitung WIZARD MolGod_PREP_1
① Konzentration auswählen
② Zielvolumen
③ Lösungsmittel

Berechnungen nach: IUPAC Gold Book ↗, Merck ↗

LösungsmittelkompatibilitätMolGod_SOLV_1

Schätzung auf Basis der Wasserlöslichkeit und des logP. Richtwerte — ersetzen keine experimentellen Untersuchungen.

LösungsmittelVerträglichkeitAnmerkungenReferenzen
Water- SchwachlogP deutet auf Lipophilie hin
EtOH~ MäßigTeilweise Löslichkeit
Acetone~ MäßigTeilweise kompatibel
DCM+ GutDCM — gut für unpolare Verbindungen
DMSO~ MäßigDMSO löst die meisten organischen Verbindungen
THF+ GutTHF — breiter Löslichkeitsbereich
Hexane+ GutHexan — ideal für unpolare Verbindungen
CHCl3+ GutCHCl3 — gut für mäßig polare und unpolare Verbindungen

Datenquellen für logP/Löslichkeit: logP: 3.30

📚 Wissenschaftliche Referenzen für Lösungsmittel (Chicago Author-Date) — zum Aufklappen klicken

Jedes Lösungsmittel ist durch 5 unabhängige wissenschaftliche Quellen belegt (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/GESTIS). Vollständige Zitate unten.

Water · NIST CAS lookup ↗
  1. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  2. International Association for the Properties of Water and Steam (IAPWS). 1997. "Release on the Static Dielectric Constant of Ordinary Water Substance." IAPWS R8-97. [link ↗]
  3. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  4. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. https://doi.org/10.1201/9781420006834. [link ↗]
  5. IFA. n.d. "Water." GESTIS Substance Database. Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung. Accessed April 25, 2026. [link ↗]
EtOH · NIST CAS lookup ↗
  1. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  2. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  3. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. https://doi.org/10.1002/9780470508183. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. https://doi.org/10.1016/B978-0-340-64578-9.X5000-9. [link ↗]
  5. IFA. n.d. "Ethanol." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Acetone · NIST CAS lookup ↗
  1. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. Rumble, John R., ed. 2023. CRC Handbook of Chemistry and Physics. 104th ed. Boca Raton, FL: CRC Press. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. [link ↗]
  5. IFA. n.d. "Acetone." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
DCM · NIST CAS lookup ↗
  1. National Institute of Standards and Technology. n.d. "Methane, dichloro- (CAS 75-09-2)." NIST Chemistry WebBook, SRD 69. Accessed April 25, 2026. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. International Agency for Research on Cancer. 1999. "Dichloromethane." IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 71: 251–315. [link ↗]
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  5. IFA. n.d. "Dichloromethane." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
DMSO · NIST CAS lookup ↗
  1. Wypych, George. 2019. Handbook of Solvents. Volume 1: Properties. 3rd ed. Toronto: ChemTec Publishing. https://doi.org/10.1016/C2018-0-02235-3. [link ↗]
  2. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  3. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  4. National Institute of Standards and Technology. n.d. "Methane, sulfinylbis- (CAS 67-68-5)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  5. IFA. n.d. "Dimethyl sulfoxide." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
THF · NIST CAS lookup ↗
  1. Armarego, Wilfred L. F., and Christina Li Lin Chai. 2009. Purification of Laboratory Chemicals. 6th ed. Oxford: Butterworth-Heinemann. https://doi.org/10.1016/B978-1-85617-567-8.50003-3. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. National Institute of Standards and Technology. n.d. "Furan, tetrahydro- (CAS 109-99-9)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  4. Smallwood, Ian M. 1996. Handbook of Organic Solvent Properties. London: Arnold. [link ↗]
  5. IFA. n.d. "Tetrahydrofuran." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Hexane · NIST CAS lookup ↗
  1. National Institute of Standards and Technology. n.d. "Hexane (CAS 110-54-3)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  3. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. [link ↗]
  4. Agency for Toxic Substances and Disease Registry. 1999. Toxicological Profile for n-Hexane. Atlanta, GA: U.S. Department of Health and Human Services. [link ↗]
  5. IFA. n.d. "n-Hexane." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
CHCl3 · NIST CAS lookup ↗
  1. International Agency for Research on Cancer. 1999. "Chloroform." IARC Monographs on the Evaluation of Carcinogenic Risks to Humans 73: 131–182. [link ↗]
  2. National Institute of Standards and Technology. n.d. "Methane, trichloro- (CAS 67-66-3)." NIST Chemistry WebBook. Accessed April 25, 2026. [link ↗]
  3. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. [link ↗]
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. [link ↗]
  5. IFA. n.d. "Chloroform." GESTIS Substance Database. Accessed April 25, 2026. [link ↗]
Löslichkeitstheorie (angewendet in der Verträglichkeitsvorhersage):
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. Boca Raton, FL: CRC Press. https://doi.org/10.1201/9781420006834 — HSP-Triplett (dD, dP, dH) + Ra-Formel.
  3. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Weinheim: Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solwatochromia.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Hoboken, NJ: Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  5. PubChem Compound Database — CAS 80-05-7 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Vollständige Bibliografie im Akkordeon REFERENZEN (am Ende der Seite) — Chicago Manual of Style 17th ed., Author-Date.

🛡️ Sicherheit — CAS 80-05-7MolGod_SAFEHUB_MAIN
Hinweis zu Datenbeschränkungen. Die Sicherheitsinformationen auf dieser Seite dienen nur zur Information und ersetzen kein vollständiges Sicherheitsdatenblatt (SDS). Konsultieren Sie vor der Verwendung des Produkts das aktuelle Sicherheitsdatenblatt des Herstellers sowie die GHS/CLP-Leitlinien. Die CLP-Einstufung bezieht sich auf die reine Bulk-Substanz, nicht auf handelsübliche Zubereitungen.

GHS/CLP-Einstufung — Verordnung (EG) Nr. 1272/2008 + UN GHS Rev. 9 (2021).

⚠️ Gefahr (Danger)
GHS05 — Ätzend
GHS05 Ätzend
GHS07 — Reizend / gesundheitsschädlich
GHS07 Reizend / gesundheitsschädlich
GHS08 — Gesundheitsgefahr
GHS08 Gesundheitsgefahr
GHS09 — Umweltgefahr
GHS09 Umweltgefahr

🚨 Gefahrenhinweise (H)

  • H360F — Kann die Fruchtbarkeit beeinträchtigen.
  • H335 — Kann die Atemwege reizen.
  • H318 — Verursacht schwere Augenschäden.
  • H317 — Kann allergische Hautreaktionen verursachen.
  • H400 — Sehr giftig für Wasserorganismen.
  • H410 — Sehr giftig für Wasserorganismen mit langfristiger Wirkung.

🛡 Sicherheitshinweise (P)

  • P203 — Vor Gebrauch alle Sicherheitshinweise einholen, lesen und befolgen.

✓ Harmonisierte Einstufung gemäß Anhang VI der CLP-Verordnung (EG) 1272/2008 (amtliche, verbindliche Einstufung). Indexnummer: 604-030-00-0.

Referenz (Chicago): European Chemicals Agency. "4,4'-isopropylidenediphenol; bisphenol A, Index No. 604-030-00-0." In Table 3 of Annex VI to Regulation (EC) No 1272/2008 (CLP Regulation), 23rd Adaptation to Technical Progress. Helsinki: European Chemicals Agency, 2026. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp.

Übersetzungen: CLP-Verordnung (EG) 1272/2008, Anhang III und IV. Daten: PubChem/NLM.

📚 Konsolidierte wissenschaftliche Referenzen — Chicago Author-Date 10 Quellen

Referenzen aus allen Safety-Hub-Registerkarten gesammelt. CAS: 80-05-7 · PubChem ↗

  1. Parlament Europejski i Rada UE. 2008. "Rozporządzenie (WE) nr 1272/2008 w sprawie klasyfikacji, oznakowania i pakowania substancji (CLP)." Dz.Urz. UE L 353. [↗] GHS, Vorschriften
  2. United Nations Economic Commission for Europe (UNECE). 2021. "Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Ninth Revised Edition." United Nations, Geneva. [↗] GHS
  3. Goldfrank, Lewis R., Robert S. Hoffman, Mary Ann Howland, et al.. 2019. "Goldfrank's Toxicologic Emergencies, 11th ed.." McGraw-Hill Education, New York. ISBN 978-1-25-985961-8. Pierwsza pomoc, Toksykologia
  4. National Institute for Occupational Safety and Health (NIOSH). 2023. "NIOSH Pocket Guide to Chemical Hazards (DHHS Publ. 2005-149)." U.S. Department of Health and Human Services / CDC, Cincinnati, OH. [↗] Pierwsza pomoc, PPE, Toksykologia
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms." CEN, Brussels. [↗] PPE
  6. UNECE. 2023. "European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." United Nations, Geneva. [↗] Utylizacja, Regulacje
  7. National Fire Protection Association (NFPA). 2022. "NFPA 400 — Hazardous Materials Code." NFPA, Quincy, MA. [↗] Magazynowanie
  8. Urben, P.G. (ed.). 2017. "Bretherick's Handbook of Reactive Chemical Hazards, 8th ed.." Butterworth-Heinemann / Elsevier, Oxford. [↗] Magazynowanie
  9. Ministerstwo Klimatu i Środowiska RP. 2023. "Baza danych o produktach i opakowaniach oraz o gospodarce odpadami (BDO)." Ministerstwo Klimatu i Środowiska, Warszawa. [↗] Utylizacja
  10. International Agency for Research on Cancer (IARC / WHO). 2024. "IARC Monographs on the Identification of Carcinogenic Hazards to Humans — List of Classifications." WHO, Lyon. [↗] Toksykologia

Registerkarten mit eigenen Referenzen (Emergency, PPE, Storage, Waste) enthalten zusätzliche bibliografische Einträge in ihren jeweiligen Abschnitten.

📈 Analytische Statistik (t-Test · RSD · Grubbs · Q-Dixon) ICH Q2

Fügen Sie eine Serie von Messwiederholungen ein (CSV oder eine Zahl pro Zeile). Der Rechner berechnet Mittelwert, Standardabweichung und 95% CI und erkennt Ausreißer (Grubbs + Dixon Q).

Trennzeichen: Komma, Leerzeichen, Tab, Zeilenumbruch. Min. 3 Messungen.
📐 Statistische Formeln
  • x̄ = Σxᵢ / n — arithmetisches Mittel
  • s² = Σ(xᵢ - x̄)² / (n-1) — Stichprobenvarianz
  • s = √s² — Standardabweichung
  • RSD% = (s / x̄) × 100% — relative Standardabweichung
  • CI₉₅ = x̄ ± t(0.05, n-1) × s / √n — Student's t
  • G = |xᵢ - x̄| / s — Grubbs-Test
  • Q = |xsuspect - xnearest| / |xmax - xmin| — Dixon Q-test

Quelle: ICH Q2(R2) Validation of Analytical Procedures · ICH PDF ↗

🧪 Puffer-Rezept-Rechner EINZIGARTIG
Literatur: pKa-Werte aus Goldberg NIST 81 · CRC Handbook 100th ed. · Stoll & Blanchard 1990 (DOI)

Wählen Sie einen Puffer aus der Liste von 20 gängigen Systemen → geben Sie den Ziel-pH-Wert ein → Sie erhalten ein exaktes Rezept mit den einzuwiegenden Massen.

Schritt 1: Puffersystem wählen

📜 Rezeptverlauf (letzte 10)
🔬 HPLC/GC-Methoden (3 Methoden)
📄
Effects of Bisphenol A Released From Composite Fillings on Reproductive Hormone Levels in Men
HPLCInternational Dental Journal202190% ✓OAResearch method (specificity, robustness)
Säule: C18, 250 x 3 mm, 5 μm
Phase: mobile phase solvents were acetonitrile (A) and water (B) (70 A: 30…
Detektion: UV 480 nm
Fluss: 1.00 mL/min
Temp.: 80.0 °C
Inj.: 20 μL
Gul P, Celik N, Ozgeris F, Demirkaya-Miloglu F, Kiziltunc A, Seven N. Effects of Bisphenol A Released From Composite Fillings on Reproductive Hormone Levels in Men. International Dental Journal. 2021;71:343-351. doi:10.1016/j.identj.2020.12.008
🔗 DOI🏠 PMC📚 PubMed📄 PDF
ObjectivesComposite resins are the most preferred filling material because of their excellent aesthetic qualities. However, a filling material should also be biocompatible as well as aesthetic. The aim of this study was to determine the serum and saliva bisphenol-A (BPA) levels and to examine the effects of serum BPA on reproductive hormone levels after healthy men were treated with composite fillings.MethodsEighteen healthy males each received 2 composite restorations. Saliva and blood samples of subjects were collected before resin application and 1 day and 1, 3, and 5 weeks after the resin was applied. BPA amounts in samples were detected using high-performance liquid chromatography (HPLC). Serum gonadotropins, testosterone, sex hormone binding globulin, free androgen index, and oestrogen levels were measured with radioimmunological assay kits. Statistical analysis of data was made using Friedman, Wilcoxon signed ranks and Mann-Whitney U tests (α = 0.05).ResultsThe amount of BPA released from composite resins over time was not significantly elevated in either saliva or serum (P > 0.5). In addition, serum BPA levels were significantly higher than saliva BPA levels for both composites (P < .05), but saliva and serum BPA levels were not statistically different when comparing the 2 composites (P > .05).ConclusionsBPA from composite resins used in this study did not significantly alter serum hormone levels.
Composite resinOestrogenFree androgen indexGonadotropinsTestosteroneSex hormone binding globulin
📄
A Pilot Study on Monomer and Bisphenol A (BPA) Release from UDMA-Based and Conventional Indirect Veneering Composites
HPLC-MSPolymers202285% ✓CC-BYResearch method (specificity)
Säule: C18, 3 μm
Phase: eluent was ionized using an ESI source
Detektion: UV 540 nm
Temp.: 121.0 °C
Inj.: 7 μL
Gradient: was as follows: 0 to 0
Hampe T, Liersch J, Wiechens B, Wassmann T, Schubert A, Alhussein M, et al. A Pilot Study on Monomer and Bisphenol A (BPA) Release from UDMA-Based and Conventional Indirect Veneering Composites. Polymers. 2022;14:4580. doi:10.3390/polym14214580
🔗 DOI🏠 PMC📚 PubMed📄 PDF
This study aimed to investigate the release of common monomers from conventional (Dialog Vario, Enamel Plus HFO) and UDMA-based indirect veneering composites (VITA VM LC, GC Gradia). Ten cylindrical samples of each material were prepared (n = 40), immersed in HPLC grade water, and incubated for 24 h in an incubation shaker at 37 °C and 112 rpm. Extraction was performed following ISO 10993-12 and monomers were detected and quantified by HPLC-MS/MS. In all the samples, urethane dimethacrylate (UDMA) and bisphenol A (BPA) were quantifiable. Compared to water blanks, BPA levels were only elevated in the eluates from conventional composites. In all other samples, concentrations were in the range of extraneous BPA and were therefore clinically irrelevant. Low concentrations of Bisphenol A-glycidyl methacrylate (BisGMA) were found in one BPA-free composite and in both conventional materials. Statistical analyses showed that BPA-free materials released significantly less BisGMA and no BPA, while UDMA elution was comparable to elution from conventional materials. All measured concentrations were below reported effective cytotoxic concentrations. Considering these results, the substitution of BPA-derivatives with UDMA might be beneficial since BPA-associated adverse effects are ruled out. Further studies should be enrolled to test the biocompatibility of UDMA on cells of the oral environment.
materials testingdental materialsindirect compositeurethane dimethacrylatebisphenol Abisphenol A-glycidyl methacrylate
📄
A rapid analysis of Bisphenol A using MISPE coupled with HPLC-FLD in tissues of food-producing animals
HPLC-FLDMethodsX202191% ✓OAResearch method (specificity, robustness)
Säule: C18, 150 x 4.6 mm, 85 μm
Phase: mobile phase as a mixture of H2O (constituent A) and MeCN (constituent…
Detektion: FLD
Fluss: 1.00 mL/min
Temp.: 20.0 °C
Gradient: -grade purity, were purchased from J
Cerkvenik-Flajs V, Šturm S. A rapid analysis of Bisphenol A using MISPE coupled with HPLC-FLD in tissues of food-producing animals. MethodsX. 2021;8:101351. doi:10.1016/j.mex.2021.101351
🔗 DOI🏠 PMC📚 PubMed📄 PDF
Bisphenol A (BPA) is a highly-produced organic compound of anthropogenic origin with a wide-range use and is ubiquitously present in both living organisms and the environment. A previously published analytical method for testing of the free (aglycone) BPA in foodstuffs was simplified and optimized for sheep muscle tissue, kidney and liver, by using only a single MISPE purification step allied with HPLC-FLD analysis. The recovery rates and RSD values over a concentration range of 1–10 µg/kg were in the range of 67‒86% and 3‒34%, respectively, while linearity in the matrix, represented by the r2, was ≥0.999. LOD values were 0.5‒1 µg/kg and LOQ values were 1 µg/kg. The analytical method used is a contribution to the field of veterinary toxicology and food testing and also proved to be applicable for other food-producing animal species, e.g. pigs, poultry and freshwater fish. The MISPE sorbent material for testing of BPA was reusable, with up to five re-use cycles without significant loss in performance characteristics.•The paper reports on a rapid determination of free (aglycone) BPA in tissues of food-producing animals by HPLC-FLD and presents a substantial improvement of analytical performance with regard to time- and cost-savings, as well as environmental protection.•MISPE is an advanced analytical technology, and the results proved that in a single and simplified SPE step it had good performance characteristics such as selectivity, recovery and precision, allied with low LOD and LOQ values.•It was proved that MISPE BPA cartridges could be used at least five times without significant loss of methodological recovery and precision.
Bisphenol ATissue analysisSolid phase extractionMolecularly imprinted polymersLiquid chromatography
📈 Methodenvalidierung (ICH Q2)

Keine Validierungsdaten. Kontaktieren Sie den Methodenautor.

Parameter nach: ICH Q2(R2) ↗

📋 Methodenvergleich
Technik Säule Analysenzeit Detektion Mobile Phase Quelle
HPLC C18 — UV 480 nm mobile phase solvents were acetonitrile (A) and water… DOI ↗
HPLC-MS C18 — UV 540 nm eluent was ionized using an ESI source DOI ↗
HPLC-FLD C18 — FLD mobile phase as a mixture of H2O (constituent… DOI ↗
🔧 Fehlerbehebung HPLC/GC
Breite Peaks / Tailing
Ursachen: Verschlissene Säule, falscher pH der mobilen Phase, Säulenüberladung, Totvolumen
Lösung: Säule austauschen, Puffer-pH prüfen (±0,2), Injektionsvolumen verringern, Verbindungen prüfen
Basisliniendrift
Ursachen: Verunreinigte mobile Phase, Gradientenprobleme, instabile Temperatur
Lösung: Phase entgasen, 0,22 µm filtrieren, Säulentemperatur stabilisieren, System spülen
Kein Peak
Ursachen: Falsche Wellenlänge, Substanz eluiert nicht, thermische Zersetzung, falsche Phase
Lösung: λmax prüfen, Gradient verlängern, Temperatur senken, mobile Phase wechseln
Geisterpeaks (ghost peaks)
Ursachen: Systemverunreinigung, Verschleppung (Carry-over), verunreinigte Vials
Lösung: System reinigen (MeOH/H₂O), neue Vials verwenden, Blank injizieren
Geringe Wiederfindung
Ursachen: Adsorption an Wänden, unzureichende Extraktion, Zersetzung
Lösung: IS zugeben, Glas silanisieren, Extraktion optimieren, Stabilität prüfen

Quellen: Snyder, Kirkland & Dolan ↗, Waters ↗

📊 HPLC-Methodenvalidierung (ICH Q2(R1)) PARTIAL

3 metrics need experimental data

Parameter Wert Einheit ICH-Q2-Kriterium Status
Linearität (R²) keine Daten unitless R² ≥ 0.999 (≥0.99 für bioanalytische) —
LOD (S/N = 3:1) keine Daten ng/mL S/N ≥ 3:1 (niedrigste nachweisbare Konzentration) —
LOQ (S/N = 10:1) keine Daten ng/mL S/N ≥ 10:1 (LOQ ≥ 3×LOD typischerweise) —
Präzision (RSD intraday, n=6) keine Daten % RSD RSD ≤ 2% (intraday) / ≤ 3% (interday) für den API —
Richtigkeit (Wiederfindung, 3 Niveaus) keine Daten % (target 100±2%) Recovery 98-102% (target 100%) —
Linearitätsbereich keine Daten z. B. 0.1-100 ng/mL Mind. 80-120% der Nominalkonzentration —
Selektivität/Spezifität keine Daten qualitative Keine Interferenz — Analyt-Peak vollständig aufgelöst (Rs ≥ 2.0) —
Robustheit (Robustness) keine Daten RSD < 2% bei ±5% Variation RSD < 2% bei kleinen Parametervariationen —
Legende: ✓ PASS ⚠ CAUTION ✗ FAIL — NO_DATA
📚 Wissenschaftliche Referenzen (Chicago Author-Date) — zum Aufklappen klicken

Standards für die Validierung analytischer Methoden — 4 unabhängige Quellen (ICH + USP + AOAC + Snyder).

  1. International Conference on Harmonisation (ICH). 2005. Validation of Analytical Procedures: Text and Methodology Q2(R1). ICH Expert Working Group. [link ↗] — Gold-standard ICH guideline — accepted by EMA, FDA, MHLW, NMPA
  2. United States Pharmacopeia (USP) Convention. 2024. USP General Chapter <621> Chromatography. USP-NF 2024 ed. USP. [link ↗]
  3. AOAC International. 2016. Appendix F: Guidelines for Standard Method Performance Requirements. AOAC INTERNATIONAL. [link ↗] — AOAC SMPR — alternative to ICH Q2 for food/dietary supplements
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. John Wiley & Sons. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗] — Industry standard textbook — Chapter 11 covers method validation
  5. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. Practical HPLC Method Development. 2nd ed. Wiley. ISBN 978-0-471-00703-6. — Classic method-development reference (DryLab heritage).
  6. Rozet, Eric, et al.. 2013. Analysis of recent pharmaceutical regulatory documents on analytical method validation. https://doi.org/10.1016/j.chroma.2007.03.111 [link ↗] — Comparison of FDA / EMA / ICH validation expectations — used for ICH Q2(R1) interpretation.
  7. Heyden, Yvan Vander, et al.. 2009. Robustness of pharmaceutical liquid chromatographic methods. https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗] — Plackett-Burman design for robustness — basis of ICH Q2 §3.7.
  8. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗] — Modern (UHPLC) update of validation chapter — practical RSD/LOD examples.
  9. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. 5th ed. Wiley. ISBN 978-0-470-68218-0. — European pharmacopeial perspective — complements USP/AOAC.
  10. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. HPLC for Pharmaceutical Scientists. Wiley-Interscience. ISBN 978-0-471-68162-4. https://doi.org/10.1002/9780470087954 [link ↗] — Pharma-focused validation case studies (specificity, robustness).
  11. European Medicines Agency (EMA). 2011. Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009. EMA Committee for Medicinal Products for Human Use. [link ↗] — EMA bioanalytical companion to ICH Q2(R1) for clinical samples.

· ⚠ Regulatorische Warnungen SVHC/REACH ↑

🔧 Fehlerbehebung HPLC — Entscheidungsbaum 6 häufige Probleme

Diagnose der 12 häufigsten HPLC-Probleme mit Entscheidungsbaum (5 Schritte pro Problem). Quelle: Snyder/Kirkland/Dolan 3rd ed. Chapter 17 + LCGC LC Troubleshooting columns 1989-2024.

Verbreiterte Peaks (broad peaks) medium

Symptom: Alle Peaks im Chromatogramm sind breiter als erwartet (FWHM > 2× normal)

🔍 Diagnosebaum:
  1. 1. Prüfen Sie, ob alle Peaks verbreitert sind oder nur einige
    → JA: Alle → instrumentelles Problem (Säule oder System)
    → NEIN: Nur einige → chemisches Problem (Wechselwirkung mit der Säule bei bestimmten Analyten)
  2. 2. Tauschen Sie eine Testsäule ein — verschwindet das Problem?
    → JA: SÄULE verschlissen — Packung beschädigt, Void in den ersten mm. Ersetzen.
    → NEIN: Problem im LC-System
  3. 3. Prüfen Sie das Totvolumen (dead volume) — Injektionsschleife, Verbindungen, Detektor
    → JA: Schleife > 100 µL für eine 4.6-mm-Säule oder lose Verbindungen → Ferrulen ersetzen, Kapillaren kürzen
    → NEIN: Diagnose fortsetzen
  4. 4. Temperaturtest: Erhöhen Sie die Säule von 25°C auf 40°C
    → JA: Schmalere Peaks → Massentransferkinetik zu langsam (T erhöhen)
    → NEIN: Continue
  5. 5. Prüfen Sie die Flussrate gegenüber dem van-Deemter-Optimum für diese Säule
    → JA: Optimum für 4.6mm/5µm = 1.0 mL/min, für 2.1mm/3µm = 0.4 mL/min
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Säule verschlissen (>2000 Injektionen ohne Vorsäule)
  • Totvolumen des Systems > 100 µL (falsche Schleife, lange Kapillaren, lose Ferrulen)
  • Temperatur zu niedrig (Massentransferkinetik)
  • Flussrate außerhalb des van-Deemter-Optimums
  • Probenlösungsmittel stärker als mobile Phase A
✓ Lösungen:
  • ✓ Säule ersetzen (bei >2000 Injektionen)
  • ✓ Alle Verbindungen prüfen — Kapillaren so kurz wie möglich
  • ✓ Säulentemperatur auf 40°C erhöhen (wenn die Substanz stabil ist)
  • ✓ Fluss auf das van-Deemter-Optimum reduzieren
  • ✓ Probe in mobiler Phase A lösen (nicht in reinem Organischem)
Peak-Tailing (Tailing, T > 1.5) high

Symptom: Peaks haben einen verlängerten "Schwanz" auf der Seite der späten Elution (Asymmetrie T = b/a > 1.5 gemäß USP)

🔍 Diagnosebaum:
  1. 1. Enthält die Substanz basische Gruppen (Amino, Pyridin)?
    → JA: Ja → Silanol-Wechselwirkungen! Fügen Sie 0.1% TFA oder 5-10 mM TEA zur mobilen Phase A hinzu.
    → NEIN: Continue
  2. 2. Prüfen Sie den pH der mobilen Phase gegenüber dem pKa der Substanz
    → JA: pH = pKa ± 1 → teilweise Ionisierung, Peak-Split. Gehen Sie pH ≥ 2 Einheiten vom pKa weg.
    → NEIN: Continue
  3. 3. Prüfen Sie das Alter der Säule (>1500 Injektionen?)
    → JA: Ja → freigelegte Silanole (Column Bleed). Ersetzen Sie die Säule durch eine mit höherem Endcapping (XTerra, Symmetry).
    → NEIN: Continue
  4. 4. Enthält die Probe Metalle (Fe, Cu aus Glasfläschchen)?
    → JA: Ja → verwenden Sie klare Typ-II-Fläschchen oder PFA. 0.1mM EDTA zur Probe geben.
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Silanol-Wechselwirkungen (basischer Analyt + freie Silanole des Kieselgels)
  • pH an der Grenze des Analyt-pKa (Peak-Split)
  • Alte Säule (Column Bleed, hohe Silanolaktivität)
  • Metalle in der Probe (Chelatbildung → Tailing)
  • Säulenüberladung (>50 µg auf einer 4.6mm-Säule)
✓ Lösungen:
  • ✓ 0.1% TFA (UV) oder 0.1% Ameisensäure (LC-MS) zur mobilen Phase A hinzufügen
  • ✓ Wählen Sie eine Säule mit hochreinem Endcapping: Waters XBridge BEH, Phenomenex Kinetex
  • ✓ Arbeiten Sie bei pH ≥ 2 Einheiten vom pKa entfernt
  • ✓ 0.1mM EDTA zur Probe (Fe/Cu-Chelatbildung)
  • ✓ Injektionsvolumen auf ≤ 20 µL für eine 4.6mm-Säule reduzieren
Grundliniendrift (Baseline Drift) medium

Symptom: Die Grundlinie steigt oder fällt systematisch über >5 Minuten

🔍 Diagnosebaum:
  1. 1. Verwenden Sie einen Gradienten (B% steigt)?
    → JA: Ja → unterschiedliche Absorption der Phasen A vs. B bei dλ. Lösungsmittelwechsel im UV-Cutoff. Prüfen Sie die UV-Absorption des %-Organik-Anteils.
    → NEIN: Weiter (isokratisch)
  2. 2. Prüfen Sie die Säulentemperatur — ist sie auf ±0.5°C stabil?
    → JA: Ja (stabil) → weiter
    → NEIN: Instabil → Säulenthermostat einschalten (>25°C kontrolliert)
  3. 3. Test: Autosampler ausschalten, nur Pumpe+Säule+Detektor betreiben
    → JA: Drift verschwindet → Autosampler-Kontamination (Nadel, Septum reinigen)
    → NEIN: Continue
  4. 4. Prüfen Sie das Alter der Lampe (D2 für UV)
    → JA: Ja (>1500 Stunden) → Lampe ersetzen
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Gradientenelution mit unterschiedlichem UV-Cutoff der Phasen
  • Instabile Säulentemperatur
  • Autosampler-Kontamination von Nadel/Septum
  • UV-Lampe alt (>1500h)
  • Detektor-Durchflusszelle verschmutzt
  • Säule nicht äquilibriert (<10 Säulenvolumina)
✓ Lösungen:
  • ✓ Säule 10-15 Säulenvolumina bei 100% A voräquilibrieren
  • ✓ Säulenthermostat ein, T 30-40°C stabil
  • ✓ Detektor-Durchflusszelle mit 50:50 ACN:H2O reinigen
  • ✓ D2-Lampe ersetzen, wenn >1500h
  • ✓ Grundlinien-Subtraktion verwenden (Chromeleon, native Empower-Funktion)
Kein Peak / verlorener Peak (no peak) critical

Symptom: Der erwartete Analyt-Peak erscheint nicht im Chromatogramm

🔍 Diagnosebaum:
  1. 1. Hat die Injektion tatsächlich stattgefunden?
    → JA: Prüfen Sie das Autosampler-Log, den Pumpendruck (sollte bei der Injektion abfallen)
    → NEIN: Autosampler-Problem → Schleife, Nadel, Probe im Fläschchen prüfen
  2. 2. Ist die Probe im Fläschchen (korrektes Volumen, nicht verdunstet)?
    → JA: Continue
    → NEIN: Keine Probe — erneut pipettieren
  3. 3. Probenstabilität — vor >24h vorbereitet?
    → JA: Ja → Degradation. Bereiten Sie eine frische Probe vor.
    → NEIN: Continue
  4. 4. Prüfen Sie die Detektionswellenlänge gegenüber dem λmax der Substanz
    → JA: Detektion bei λ entspricht NICHT dem λmax → kein Signal. DAD 200-400nm scannen.
    → NEIN: Continue
  5. 5. Test: Injizieren Sie einen reinen Standard (bekannter Konzentration, frisch)
    → JA: Standard ergibt einen Peak → Problem mit der Probe (Matrix, Derivatisierung)
    → NEIN: Kein Peak auch mit dem Standard → Systemproblem (Säule, Phase, Gradient)
⚠️ Typische Ursachen:
  • Probe nicht aus dem Fläschchen entnommen (Autosampler-Fehler)
  • Probe degradiert (>24h pH/Temp/Licht)
  • Detektion bei falscher Wellenlänge
  • Falsche mobile Phase (z. B. vergessenes TFA)
  • Säule umgekehrt / falsche stationäre Phase
  • Substanz eluiert an der Front (V0) → nicht retendiert, nicht sichtbar
✓ Lösungen:
  • ✓ Frische Probe nach dem exakten Protokoll neu vorbereiten
  • ✓ UV-Vis-DAD-Scan 200-400nm + Suche nach λmax
  • ✓ Zusammensetzung der mobilen Phase prüfen — TFA hinzugefügt?
  • ✓ Umgekehrte Säulenrichtung testen (vorsichtig!)
  • ✓ Bei Retention <1 min — % B verringern, MeOH statt ACN
  • ✓ Prüfen Sie die Tabelle "expected_rt" in wp_molgod_hplc_methods
Druck zu hoch (pressure too high) critical

Symptom: Pumpendruck > 80% des Säulenmaximums oder System-Shutdown mit High-Pressure-Fehler

🔍 Diagnosebaum:
  1. 1. Prüfen Sie, ob die Säule korrekt angeschlossen ist (Pfeilrichtung)
    → JA: OK
    → NEIN: Säule umgekehrt → umdrehen (niemals "rückwärts" betreiben)
  2. 2. Test: Säule aus dem System entfernen, nur Pumpe+Detektor betreiben
    → JA: Druck fällt auf <50 bar → Problem in der Säule (verstopft)
    → NEIN: Druck bleibt hoch → In-Line-Filter verstopft, Fritte verschmutzt
  3. 3. Prüfen Sie den Vorsäulenfilter (In-Line-Fritte)
    → JA: Verschmutzt und braun → ersetzen
    → NEIN: Continue
  4. 4. Säule rückwärts mit 50:50 ACN:H2O spülen, ohne die Säule — verschwindet es?
    → JA: Partikel im ersten mm stecken geblieben — 30 min Spülung kann sie wiederherstellen
    → NEIN: Säule ersetzen
⚠️ Typische Ursachen:
  • In-Line-Filter (Fritte) mit Partikeln verstopft
  • Puffer-Aussalzung (Ausfällung bei hohem %B)
  • Probe enthält Schwebstoffe (0.22 µm vor der Injektion filtrieren)
  • Säule verstopft (Column Bed Compaction)
  • Gradient mit Pufferphase + viel Organik → Salzausfällung
✓ Lösungen:
  • ✓ Probe IMMER durch 0.22 µm PVDF vor der Injektion filtrieren
  • ✓ In-Line-Filter alle 100 Injektionen ersetzen (oder wenn der Druck >20% steigt)
  • ✓ Verwenden Sie NICHT >20mM Phosphatpuffer + >70% ACN (das Salz fällt aus)
  • ✓ Säule 30 min mit 50:50 ACN:H2O in umgekehrter Richtung spülen (wenn vom Hersteller zugelassen)
  • ✓ Vorsäule 4×3mm zum Schutz der Hauptsäule
Geisterpeaks (Ghost Peaks) high

Symptom: Unerklärte Peaks im Chromatogramm, die in der Kalibrierung fehlen

🔍 Diagnosebaum:
  1. 1. Test: Blindinjektion (reines Probenlösungsmittel)
    → JA: Ein Geisterpeak erscheint → Kontamination des Systems oder der Eluenten
    → NEIN: Erscheint nur mit der Probe → Matrix
  2. 2. Wächst der Geisterpeak mit dem Gradienten (eluiert bei hohem %B)?
    → JA: Ja → überladene Säule oder stark retendiert aus einem vorherigen Lauf
    → NEIN: Unabhängig vom Gradienten → Autosampler-Verschleppung
  3. 3. Increase carryover wash (between injections)
    → JA: Hilft → Verschleppung war die Ursache. Stärkeres Waschprotokoll.
    → NEIN: Continue
  4. 4. Reinwasser-Injektion — gibt es einen Peak?
    → JA: Ja → Kontamination der Wasserquelle (Organik aus dem DI-System)
    → NEIN: Continue
⚠️ Typische Ursachen:
  • Verschleppung in Autosampler-Nadel/-Schleife
  • Eluent-Kontamination (auch in HPLC-Qualität)
  • Stark retendierte Komponenten aus vorherigen Läufen
  • Kunststoff in den Fläschchen (Phthalate, PEG aus den Kappen)
  • DI-Wasser unzureichend gereinigt
✓ Lösungen:
  • ✓ Waschprotokoll verstärken: 100% B → 100% A → 50:50 (3 Zyklen)
  • ✓ Starke Wäsche: 100% DMSO oder 100% MeOH vor der Kalibrierung
  • ✓ Eluenten im Zweifelsfall durch 0.22 µm PTFE filtrieren
  • ✓ Braunglas + Teflon-beschichtete Kappen für Proben verwenden
  • ✓ Periodische Gradientenrampe auf 100% B für 10 min (Reinigung)
📚 Wissenschaftliche Referenzen (Chicago Author-Date) — zum Aufklappen klicken
  1. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. John Wiley & Sons. Chapter 17 (Troubleshooting) pp. 559-616. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗]
  2. Dolan, John W.. 2014. LC Troubleshooting (monthly column 1989-2024). LCGC North America. [link ↗] — John Dolan 35-letnia seria miesięcznych artykułów problemowych
  3. Kromidas, Stavros. 2017. HPLC Made to Measure: A Practical Handbook for Optimization. 2nd ed. Wiley-VCH. ISBN 978-3-527-31377-1. — Praktyczny przewodnik problem-solving dla labs analitycznych
  4. Dolan, John W.. 2013. When to Modify Method Conditions. 192-199. [link ↗] — Decision flow for changing flow rate / temperature / %B vs swapping columns.
  5. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗] — Chapter 9 covers troubleshooting modern UHPLC systems (sub-2 µm particles).
  6. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. 5th ed. Wiley. ISBN 978-0-470-68218-0. — Solid step-by-step problem isolation chapter (eluents, columns, instruments).
  7. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. Practical HPLC Method Development. 2nd ed. Wiley. ISBN 978-0-471-00703-6. — Method-development companion volume with troubleshooting cross-refs.
  8. Carr, Peter W.. 2009. The new physical chemistry of HPLC. 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗] — Theoretical basis for diagnosing efficiency losses (mass-transfer, eddy diffusion).
  9. Heyden, Yvan Vander, et al.. 2009. Robustness of pharmaceutical liquid chromatographic methods. 2120-2129. https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗] — How to diagnose method failures vs. system failures (Plackett-Burman).
  10. Engelhardt, Heinz. 2014. 100 Years of Chromatography. 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5. — Historical context for ghost-peak phenomenology (silica chemistry).
  11. Stoll, Dwight R., and Peter W. Carr. 2017. Two-Dimensional Liquid Chromatography: A State of the Art Tutorial. 519-531. https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. The new physical chemistry of HPLC. 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations. 1167-1182. https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. 100 Years of Chromatography. 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. Probabilistic approach to peak deconvolution in chromatography. 8525-8531. https://doi.org/10.1021/ac101742z [link ↗]
🧪 Löslichkeit und Lösungsmittelkompatibilität MolGod_SOLUB_1
Molekül
Bisphenol A
Formel
C15H16O2
logP
3.30
Masse (g/mol)
228.29
Polarität
Hydrophob (unpolar)

⚠️ GC-Schätzung (Hoftyzer–Van Krevelen). Keine HSP-Literaturdaten für diese CAS — Genauigkeit ±2 MPa½. Experimentell verifizieren.

Lösungsmittel Compat. Ra Visuell GC-MS HPLC Anwendungen Referenzen
Water (H₂O)− Schwach41.3
✗ NieA (aqueous) (RP)
PufferZellkulturanalytischhydrophile Extraktion
Ethanol (EtOH)− Schwach18.4
✗ NieA/B modifier (RP/NP)
ExtraktionSpektroskopie (UV-Vis)SyntheseHPLC-Modifier
Methanol (MeOH)− Schwach21.9
✗ NieA/B (RP) (RP)
HPLC (eluent)LC-MSKarl FischerUV-transparent do 205 nm
Acetone~ Mittel11.5
✗ NieB modifier (NP)
GC headspaceKristallisationEntfettungSynthese
Acetonitrile (ACN)− Schwach17.7
✗ NieB (RP) (RP)
HPLC-Eluent (Goldstandard)LC-MS (wolny cut-off UV 190 nm)Peptidanalyse
DMSO− Schwach20.4
✗ NieN/A (N/A)
NMR (d6-DMSO)Zellbiologie (Kryokonservierung)ArzneimittelabgabeSynthese
THF~ Mittel11.1
✗ NieB (NP) (NP)
GPC/SEC (Polymeranalyse)Grignard-Synthesemetallorganisch
DCM (CH₂Cl₂)− Schwach13.4
✓ TakB (NP) (NP)
ExtraktionNP-HPLCGC-MSKristallisation (Anti-Solvens)
Chloroform (CHCl₃)~ Mittel11.8
✓ TakN/A (toxic) (N/A)
NMR (CDCl3)Lipidextraktion (Folch-Methode)NP-TLC
Hexane+ Gut7.4
✓ TakA (NP) (NP)
NP-HPLCÖlextraktion (Lipide)GC-MSTLC (NP)
Toluene− Schwach12.2
✓ TakB (NP) (NP)
NMR (d8-toluene)SyntheseDean-Stark azeotrope Trocknung
📚 Wissenschaftliche Referenzen für Lösungsmittel (Chicago Author-Date) — zum Aufklappen klicken

11 Lösungsmittel × 5 unabhängige wissenschaftliche Quellen (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/Wypych/Armarego/Snyder/GESTIS). 55+ vollständige Zitate unten.

Water (H₂O)
  1. NIST — NIST Chemistry WebBook — Water (CAS 7732-18-5)
  2. CRC — CRC Handbook of Chemistry and Physics, 104th ed., Sec. 8 (Properties of Water)
  3. IAPWS — IAPWS Release on Static Dielectric Constant of Water
  4. Reichardt 2011 — Solvents and Solvent Effects in Organic Chemistry
  5. GESTIS — GESTIS Substance Database — Water
Ethanol (EtOH)
  1. NIST — NIST Chemistry WebBook — Ethanol (CAS 64-17-5)
  2. CRC — CRC Handbook — Ethanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — Ethanol eluotropic
  4. Smallwood — Handbook of Organic Solvent Properties — Ethanol
  5. GESTIS — GESTIS Substance Database — Ethanol
Methanol (MeOH)
  1. NIST — NIST Chemistry WebBook — Methanol (CAS 67-56-1)
  2. CRC — CRC Handbook — Methanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — MeOH eluotropic, eo=0.95
  4. GESTIS — GESTIS Substance Database — Methanol
Acetone
  1. NIST — NIST Chemistry WebBook — Acetone (CAS 67-64-1)
  2. CRC — CRC Handbook — Acetone physical & thermodynamic constants
  3. Hansen 2007 — Hansen Solubility Parameters — Acetone (dD=15.5, dP=10.4, dH=7.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Acetone
  5. GESTIS — GESTIS Substance Database — Acetone
Acetonitrile (ACN)
  1. NIST — NIST Chemistry WebBook — Acetonitrile (CAS 75-05-8)
  2. CRC — CRC Handbook — Acetonitrile constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — ACN gold-standard HPLC eluent
  4. Reichardt 2011 — Solvents and Solvent Effects — ACN dipolar aprotic
  5. GESTIS — GESTIS Substance Database — Acetonitrile
DMSO
  1. NIST — NIST Chemistry WebBook — DMSO (CAS 67-68-5)
  2. Wypych 2019 — Handbook of Solvents Vol. 1 — DMSO comprehensive properties
  3. Hansen 2007 — HSP — DMSO (dD=18.4, dP=16.4, dH=10.2)
  4. Reichardt 2011 — Solvents and Solvent Effects — DMSO E_T(30)=45.1, dipolar aprotic
  5. GESTIS — GESTIS Substance Database — DMSO
THF
  1. NIST — NIST Chemistry WebBook — THF (CAS 109-99-9)
  2. Armarego 2009 — Purification of Laboratory Chemicals — THF drying & peroxide test
  3. Hansen 2007 — Hansen Solubility Parameters — THF (dD=16.8, dP=5.7, dH=8.0)
  4. Smallwood — Handbook of Organic Solvent Properties — THF
  5. GESTIS — GESTIS Substance Database — Tetrahydrofuran
DCM (CH₂Cl₂)
  1. NIST — NIST Chemistry WebBook — Dichloromethane (CAS 75-09-2)
  2. IARC 71 — IARC Monograph 71 — DCM (Group 2A carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — DCM (dD=18.2, dP=6.3, dH=6.1)
  4. Reichardt 2011 — Solvents and Solvent Effects — DCM polarity index
  5. GESTIS — GESTIS Substance Database — Dichloromethane
Chloroform (CHCl₃)
  1. NIST — NIST Chemistry WebBook — Chloroform (CAS 67-66-3)
  2. IARC 73 — IARC Monograph 73 — Chloroform (Group 2B carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — CHCl3 (dD=17.8, dP=3.1, dH=5.7)
  4. Reichardt 2011 — Solvents and Solvent Effects — CHCl3 H-bond donor strength
  5. GESTIS — GESTIS Substance Database — Chloroform
n-Hexane
  1. NIST — NIST Chemistry WebBook — n-Hexane (CAS 110-54-3)
  2. ATSDR n-Hexane — ATSDR Toxicological Profile for n-Hexane — neuropatia obwodowa (n-Heksan NIE jest kancerogenem IARC)
  3. Hansen 2007 — Hansen Solubility Parameters — n-Hexane (dD=14.9, dP=0, dH=0)
  4. Snyder & Kirkland — Modern Liquid Chromatography — n-Hexane NP standard, eo=0.00
  5. GESTIS — GESTIS Substance Database — n-Hexane
Toluene
  1. NIST — NIST Chemistry WebBook — Toluene (CAS 108-88-3)
  2. IARC 71 — IARC Monograph 71 — Toluene
  3. Hansen 2007 — Hansen Solubility Parameters — Toluene (dD=18.0, dP=1.4, dH=2.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Toluene
  5. GESTIS — GESTIS Substance Database — Toluene
Löslichkeitstheorie (angewendet in der Verträglichkeitsvorhersage):
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. CRC Press. https://doi.org/10.1201/9781420006834 — HSP-Triplett (dD, dP, dH) + Ra-Formel.
  3. Stefanis, E., and C. Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." Int J Thermophys 29: 568–585. https://doi.org/10.1007/s10765-008-0415-z
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solwatochromia.
  5. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  6. Van Krevelen, D. W., and K. Te Nijenhuis. 2009. Properties of Polymers. 4th ed. Elsevier. https://doi.org/10.1016/B978-0-08-054819-7.X0001-5 — Hoftyzer–Van Krevelen group contribution dla dD/dP/dH z SMILES.
  7. Marcus, Yizhak. 1998. The Properties of Solvents. Wiley Series in Solution Chemistry, Vol. 4. ISBN 9780471983699 — Vollständige tabellarische Sammlung von 250+ Lösungsmitteln (ε, μ, Donizität, Akzeptorzahlen).
  8. PubChem Compound Database — CAS 80-05-7 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Vollständige Bibliografie im Akkordeon REFERENZEN (am Ende der Seite) — Chicago Manual of Style 17th ed., Author-Date.

📚 Technische FAQ — Bisphenol A (5) MolGod_TECHFAQ_1
❓ Jak przygotować roztwór standardowy Bisfenolu A o stężeniu 100 µg/mL?
Aby przygotować roztwór standardowy Bisfenolu A (CAS 80-05-7) o stężeniu 100 µg/mL, należy odważyć dokładnie 0.104 mg substancji (obliczone jako: 100 µg/mL × 1 mL / 228.29 g/mol × 1 mol/6.022×10²³ cząsteczek) i rozpuścić w 1 mL odpowiedniego rozpuszczalnika (np. metanolu lub acetonitrylu). Roztwór należy dokładnie wymieszać i przechowywać zgodnie z zaleceniami dla Bisfenolu A.
Hilfreich?
❓ W jakich warunkach należy przechowywać Bisfenol A, aby zapewnić jego stabilność?
Bisfenol A powinien być przechowywany w temperaturze 2-8°C, w szczelnie zamkniętym pojemniku, chronionym przed światłem (najlepiej w ciemnej butelce z HDPE lub szkła borokrzemianowego) i wilgocią. Wilgotność względna powietrza nie powinna przekraczać 65%.
Hilfreich?
❓ Jaka metoda analityczna jest najbardziej odpowiednia do oznaczania Bisfenolu A w próbkach środowiskowych?
Dla Bisfenolu A (logP ~ 2.5, MW 228.29 g/mol) zalecana jest metoda chromatografii cieczowej wysokosprawnej (HPLC) z detektorem UV (λ = 230-260 nm) lub spektrometrią mas (MS). Kolumna odwróconofazowa C18 jest powszechnie stosowana, a elucja może być przeprowadzona z użyciem mieszaniny wody i acetonitrylu z dodatkiem kwasu octowego.
Hilfreich?
❓ Z jakimi substancjami Bisfenol A wykazuje niezgodności chemiczne?
Bisfenol A może reagować lub ulegać degradacji w obecności silnych utleniaczy (np. nadtlenku wodoru), zasad (np. NaOH) oraz niektórych rozpuszczalników polarne aromatyczne (np. chloroform). Należy unikać kontaktu z tworzywami zawierającymi Bisfenol A podczas jego analizy.
Hilfreich?
❓ W jakim celu stosuje się Bisfenol A w laboratoriach chemicznych?
Bisfenol A jest używany jako wzorzec kalibracyjny w oznaczaniu estrogenów i ich analogów, a także jako substrat w syntezie poliwęglanów i żywic epoksydowych. W laboratoriach analitycznych służy do walidacji metod HPLC/GC oraz jako standard w badaniach ekotoksykologicznych.
Hilfreich?
🧮 Laborrechner (8) MolGod_LABCALC_1
Verdünnung (C₁V₁=C₂V₂)
Molarität (M=n/V)
pH-Puffer (Henderson-Hasselbalch)
Beer-Lambert (A=εcl)
Masse → Mol
Konzentration % → M
ppm → mg/L
Temperatur C↔F↔K

Verifizierte Formeln: IUPAC Gold Book ↗, DOI ↗

📊 Spektroskopische Spektrendatenbanken MolGod_SPECDB_3
📋 Laborprotokoll-Generator MolGod_PROTOCOL_1

Protokoll erstellt auf Grundlage von: GHS SDS, Aldrich Lab Guide ↗

🏷️ Etiketten-Generator (QR) MolGod_LABEL_1
Bisphenol A• Bisphenol A• CAS: 80-05-7• EC: 201-245-8• Formel: C15H16O2• Masse: 228.29 g/molGEFAHRGHS-GEFAHRENHINWEISE:H335: Kann die Atemwege reizen.H318: Verursacht schwere Augenschäden.H317: Kann allergische Hautreaktionen verursachen.H410: Sehr giftig für Wasserorganismen mit langfristiger Wirkung.DH ScientificScience first. Commerce as consequence.Charge-Nr.: Nettomasse: Herst.:
ADMET — Pharmakologisches Profil
ADMET-Vorhersagen werden geladen…
🧪 Assistent zur Lösungsherstellung (Smart Prep) MolGod_PREP_2

Geben Sie ein, was Sie zubereiten möchten — ich erstelle eine SOP

Beispiele unten — zum Einfügen anklicken:
Fertige Rezepte:
📚 Überblick über die wissenschaftliche Literatur — CAS 80-05-7MolGod_LITHUB_MAIN
⭐ Wichtigste Erkenntnisse (wissenschaftliche Literatur) 5 Publikationen
🏆 CAS 80-05-7 — multi-criteria ranking (W12): 30% Zitierungen · 20% Aktualität · 20% Thema · 15% historisch · 15% Open Access.
  1. #1
    Calafat AM; Ye X; Wong LY et al. (2008) · Environmental health perspectives
    Warum es wichtig ist: Pflichtzitat (Kanon) · hoher Impact (1299 Zitierungen)
    SCORE 11.59 Mechanismus MUST-CITE Zitierungen: 1299 DOI ↗
  2. #2
    Wetherill YB; Akingbemi BT; Kanno J et al. (2007) · Reproductive toxicology (Elmsford, N.Y.)
    Warum es wichtig ist: Pflichtzitat (Kanon) · 640 Zitierungen · Übersichtsarbeit
    SCORE 11.02 Übersicht MUST-CITE Zitierungen: 640 DOI ↗
  3. #3
    Corrales J; Kristofco LA; Steele WB et al. (2015) · Dose-response : a publication of International Hormesis Society
    Warum es wichtig ist: Pflichtzitat (Kanon) · 413 Zitierungen · Übersichtsarbeit
    SCORE 9.35 Übersicht MUST-CITE Zitierungen: 413 DOI ↗
  4. #4
    vom Saal FS; Akingbemi BT; Belcher SM et al. (2007) · Reproductive toxicology (Elmsford, N.Y.)
    Warum es wichtig ist: Pflichtzitat (Kanon) · 427 Zitierungen
    SCORE 8.69 Mechanismus MUST-CITE Zitierungen: 427 DOI ↗
  5. #5
    Le HH; Carlson EM; Chua JP et al. (2008) · Toxicology letters
    Warum es wichtig ist: Pflichtzitat (Kanon) · 286 Zitierungen
    SCORE 7.37 Mechanismus MUST-CITE Zitierungen: 286 DOI ↗
📈 HPLC-Gradient — Optimierer (LSS) VORLAGE

Gradient basierend auf PubChem XLogP3 + LSS (Snyder et al. 2010, Kap. 9).

  • Säule: C18
  • Puffer: phosphate
  • Fluss: 1 mL/min
  • logP: 3.3 (PubChem XLogP3)
  • Rampe: 31% → 95% B, 15 min
  • Gesamtanalysenzeit: 28 min
t (min) %A %B flow (mL/min) Kommentar
0 69 31 1 Start (Gleichgewicht)
2 69 31 1 Ende der Anfangshaltezeit
17 5 95 1 Ende der LSS-Rampe
22 5 95 1 Säulenspülung
23 69 31 1 Rückkehr zu init
28 69 31 1 Reäquilibrierung
📚 Wissenschaftliche Referenzen (Chicago Author-Date)
  1. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley. — Chapter 9 — gradient elution, LSS theory (cited as Snyder et al. 2010 in tool description).
  2. Schoenmakers, Peter J. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier. — Numerical optimization of gradient programs.
  3. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley. — Foundational LSS reference for the %B_init = 5 + 8·logP heuristic implemented here.
  4. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. [DOI ↗] — Modern review of gradient retention models — basis for non-LSS extensions.
  5. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. [DOI ↗]
  6. Dong, Michael W. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793. — Modern UHPLC gradient programming, sub-2 µm scaling rules.
  7. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. [DOI ↗]
  8. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. [DOI ↗] — Reference for orthogonal gradient design (2D-LC second dimension).
  9. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199.
  10. Meyer, Veronika R. 2010. Practical High-Performance Liquid Chromatography. Wiley. — Chapter 7 — practical gradient design with isokratyczny scouting.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531. [DOI ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. [DOI ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. [DOI ↗]
  14. Engelhardt, Heinz. 2014. 100 Years of Chromatography. Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531. [DOI ↗]

REST: /wp-json/molgod/v1/hplc/gradient/80-05-7

📐 HPLC-Peaksymmetrie-Rechner (USP Tf / As)

Berechnen Sie den USP-Tailing-Faktor (T) und die Asymmetrie (As) aus den Peak-Halbwertsbreiten. Geben Sie a (linke Halbbreite) und b (rechte Halbbreite) an, gemessen bei 5% oder 10% der Peakhöhe.

📚 Referenzen (Chicago Author-Date)
  1. USP General Chapter <621>. 2024. "Chromatography." United States Pharmacopeial Convention. [link ↗] — Defines USP Tailing Factor T = (a+b)/(2a) measured at 5% peak height.
  2. International Council for Harmonisation (ICH). 2023. "Validation of Analytical Procedures Q2(R2)." ICH Expert Working Group. [link ↗] — Tailing factor is a system suitability parameter (Section 6).
  3. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." Analytical Chemistry 55: 730-737 https://doi.org/10.1021/ac00255a033 [link ↗] — Original asymmetry factor As = b/a at 10% height (Foley & Dorsey 1983).
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." Wiley. https://doi.org/10.1002/9780470508183 [link ↗] — Chapter 2.4 — peak shape diagnostics and remedies.
  5. Dolan, John W.. 2003. "Peak tailing and resolution." LCGC North America 21: 610-614 [link ↗] — How tailing factor degrades effective resolution.
  6. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗] — Modern numerical deconvolution for asymmetric peaks.
  7. Kromidas, Stavros. 2017. "HPLC Made to Measure: A Practical Handbook for Optimization." Wiley-VCH. — Practical Tf and As thresholds for routine QC.
  8. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." Wiley. https://doi.org/10.1002/9781119313793 [link ↗]
  9. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." Wiley.
  10. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." Journal of Chromatography B 877: 2120-2129 https://doi.org/10.1016/j.jchromb.2008.10.052 [link ↗]
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗]
📊 Rechner für Auflösung und Bodenzahl (Rs, N, H)

Berechnen Sie die Auflösung Rs, die theoretische Bodenzahl N und HETP (H) für ein Paar von HPLC-Peaks. Geben Sie die Retentionszeiten, Peakbreiten (bei 50% oder an der Basis) und die Säulenlänge an.

📚 Referenzen (Chicago Author-Date)
  1. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. John Wiley & Sons. ISBN 978-0-470-16754-0. https://doi.org/10.1002/9780470508183 [link ↗] — Chapter 2 covers resolution, plate count and HETP fundamentals (Snyder et al. 2010).
  2. USP General Chapter <621>. 2024. "Chromatography." USP-NF 2024 ed. United States Pharmacopeial Convention. [link ↗] — Defines Rs >= 1.5 acceptance criterion and N calculation methods.
  3. Dolan, John W.. 2003. "How much resolution is enough?." LCGC North America 21: 350-353 [link ↗] — Practical guidance on Rs targets for routine method development.
  4. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." Chemical Engineering Science 5: 271-289 https://doi.org/10.1016/0009-2509(56)80003-1 [link ↗] — Origin of N = 5.54·(tr/w0.5)² half-height plate count formulation.
  5. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory." Marcel Dekker. ISBN 978-0-8247-1357-7. — Resolution equation Rs = (1/4)·√N·(α-1)/α·k/(1+k) (master equation).
  6. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." Analytical Chemistry 55: 730-737 https://doi.org/10.1021/ac00255a033 [link ↗] — Skewed-peak corrections to apparent N.
  7. Knox, John H.. 1977. "Practical aspects of LC theory." Journal of Chromatographic Science 15: 352-364 https://doi.org/10.1093/chromsci/15.9.352 [link ↗]
  8. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  9. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. ISBN 978-1-119-31378-3. https://doi.org/10.1002/9781119313793 [link ↗]
  10. Meyer, Veronika R.. 2010. "Practical High-Performance Liquid Chromatography." 5th ed. Wiley. ISBN 978-0-470-68218-0.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial." Analytical Chemistry 89: 519-531 https://doi.org/10.1021/acs.analchem.6b03506 [link ↗]
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772 https://doi.org/10.1016/j.chroma.2008.11.094 [link ↗]
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182 https://doi.org/10.1002/jssc.200700026 [link ↗]
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH. ISBN 978-3-527-33473-5.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531 https://doi.org/10.1021/ac101742z [link ↗]

Related products

🧪 Systemeignung — Live-Rechner (USP <621>)

Geben Sie Daten aus 5-6 Injektionen ein (Flächen, tR, Tailing, Böden) — der Rechner berechnet %RSD, Mittelwerte und prüft die Konformität mit USP <621>. Sie können CSV (kommagetrennt) einfügen oder einzelne Werte bearbeiten.

📚 Referenzen (Chicago Author-Date)
  1. USP General Chapter <621>. 2024. "Chromatography (System Suitability section)." USP-NF 2024 ed. United States Pharmacopeial Convention. [link ↗] — Defines RSD area < 2%, tailing < 2.0, N > 2000 acceptance criteria.
  2. International Council for Harmonisation (ICH). 2023. "Validation of Analytical Procedures Q2(R2)." ICH Expert Working Group. [link ↗] — Section 5.4 — system suitability is part of method validation.
  3. US Food and Drug Administration (FDA). 2018. "Reviewer Guidance: Validation of Chromatographic Methods." US Food and Drug Administration. [link ↗] — CDER reviewer perspective on chromatographic validation expectations.
  4. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." 3rd ed. Wiley. — Chapter 2 — system suitability fundamentals (RSD, Tf, N).
  5. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." — Robustness vs. system suitability — design-of-experiments framework.
  6. Rozet, Eric, et al.. 2013. "Analysis of recent pharmaceutical regulatory documents on analytical method validation."
  7. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA. [link ↗] — EMA companion guideline with bioanalytical SS criteria.
  8. Dong, Michael W.. 2019. "HPLC and UHPLC for Practicing Scientists." 2nd ed. Wiley. — UHPLC-specific suitability adjustments (n=5 vs. n=6).
  9. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience.
  10. AOAC International. 2016. "Appendix F: Guidelines for Standard Method Performance Requirements." AOAC INTERNATIONAL. [link ↗] — Alternative SS thresholds for food/dietary samples.
  11. Stoll, Dwight R., and Peter W. Carr. 2017. "Two-Dimensional Liquid Chromatography: A State of the Art Tutorial."
  12. Carr, Peter W.. 2009. "The new physical chemistry of HPLC."
  13. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations."
  14. Engelhardt, Heinz. 2014. "100 Years of Chromatography." 2nd ed. Wiley-VCH.
  15. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography."

Inne produkty z tej kategorii

📋 Status prawny (REACH / TSCA / UK)MolGod_REG_2
JurysdykcjaListaStatusSunset
EUSVHClisted—
📤 Betten Sie dieses Molekül auf Ihrer Website ein

Haben Sie einen Blog, ein Forum oder einen wissenschaftlichen Dienst? Betten Sie das interaktive 3D-Molekül auf Ihrer Website ein — jeder Ihrer Leser sieht es, und darunter gibt es einen Link zu unserem Shop, wo er das Reagenz kaufen kann.

🔗 HTML-iframe-Code (am einfachsten — funktioniert überall)

Kopieren Sie ihn und fügen Sie ihn in den HTML-Editor Ihrer Website ein:

Passen Sie width und height an Ihr Layout an.

⚙ WordPress Shortcode (für andere Shops mit MOL-GOD)

🌐 Direktlink (für E-Mails, Chats, LinkedIn, Twitter)

LinkedIn Twitter/X Facebook
QR code CAS 80-05-7

📱 QR code (zum Druck auf Flyern / Etiketten / Katalogen)

Platzieren Sie ihn in einem Produktkatalog, auf einem Flaschenetikett oder einem Flyer. Der Kunde scannt ihn — sieht das 3D-Molekül auf seinem Telefon, mit einem Link zu Ihrem Shop.

⬇ PNG herunterladen

🖼 Open Graph image (für Social-Media-Meta-Tags)

Wenn Sie den Link teilen, ruft Facebook/LinkedIn/Discord automatisch die Bildvorschau ab:

Preview
📋 Lizenz: Der Embed behält einen Backlink zu DH Scientific (erforderlich — der Shop ist die Datenquelle). Chemische Daten stammen von PubChem (CC0 — gemeinfrei). Der Embed ist KOSTENLOS für Bildungs-, kommerzielle und Hobbyzwecke.
📚 REFERENZEN (Gesammelte Bibliografie, Chicago Author-Date) 107 Einträge

Alle wissenschaftlichen Quellen, die in den Akkordeons oben für CAS 80-05-7 zitiert werden.Format: Chicago Manual of Style, 17. Aufl., Autor-Datum-System.

🗄️ Wissenschaftliche Datenbanken

  1. NIST. 2026. NIST Chemistry WebBook: CAS 80-05-7. Gaithersburg, MD: National Institute of Standards and Technology. https://webbook.nist.gov/cgi/cbook.cgi?ID=80-05-7. (Accessed 2026-11-12.)
  2. AIST. 2026. Spectral Database for Organic Compounds (SDBS): CAS 80-05-7. Tsukuba, Japan: National Institute of Advanced Industrial Science and Technology. https://sdbs.db.aist.go.jp/. (Accessed 2026-11-12.)
  3. PubChem. 2026. PubChem Compound Summary: CAS 80-05-7. Bethesda, MD: National Center for Biotechnology Information (NCBI), National Library of Medicine. https://pubchem.ncbi.nlm.nih.gov/#query=80-05-7. (Accessed 2026-11-12.)
  4. ECHA. 2026. C&L Inventory and REACH Registration: CAS 80-05-7. Helsinki: European Chemicals Agency. https://echa.europa.eu/information-on-chemicals/annex-vi-to-clp. (Accessed 2026-11-12.)

📐 Standards / Richtlinien

  1. ICH. 2026. "ICH Harmonised Guideline: CAS 80-05-7." Geneva: International Council for Harmonisation. https://database.ich.org/sites/default/files/Q1A%28R2%29%20Guideline.pdf. (Accessed 2026-11-12.)
  2. National Fire Protection Association (NFPA). 2024. "NFPA 30: Flammable and Combustible Liquids Code." NFPA, Quincy, MA. https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=30.
  3. Occupational Safety and Health Administration (OSHA). 2023. "29 CFR 1910.106 — Flammable Liquids." U.S. Department of Labor, Federal Register. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.106.
  4. European Chemicals Agency (ECHA). 2024. "Annex VI to Regulation (EC) No 1272/2008 (CLP) — Harmonised Classification and Labelling." ECHA, Helsinki / Official Journal of the European Union. https://echa.europa.eu/regulations/clp/clp-classification.
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=205:110:::::FSP_PROJECT,FSP_ORG_ID:38536,6080&cs=1B0DAA8B85DF42E4A2C70E5D71F0BFA32.
  6. European Committee for Standardization (CEN). 2001. "EN 166:2001 — Personal eye-protection — Specifications." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:6541&cs=1F1A4E0A78C4DB6A28DBE2E8C29D89DCF.
  7. European Committee for Standardization (CEN). 2009. "EN 14605:2005+A1:2009 — Protective clothing against liquid chemicals — Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:21581&cs=1A04A2D3C7CC58E9E6CB58D55F7EBFB7E.
  8. National Institute for Occupational Safety and Health (NIOSH). 2017. "Recommendations for Chemical Protective Clothing: A Companion to the NIOSH Pocket Guide." U.S. Department of Health & Human Services / CDC. https://www.cdc.gov/niosh/ncpc/default.html.
  9. Occupational Safety and Health Administration (OSHA). 2011. "Personal Protective Equipment — General requirements." U.S. Department of Labor — 29 CFR 1910.132. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.132.

📖 Bücher

  1. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook, 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/Hansen-Solubility-Parameters-A-Users-Handbook/Hansen/p/book/9780849372483.
  2. Barton, Allan F. M. 1991. CRC Handbook of Solubility Parameters and Other Cohesion Parameters: 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/CRC-Handbook-of-Solubility-Parameters-and-Other-Cohesion-Parameters/Barton/p/book/9780849301766.
  3. Connors, Kenneth A., Gordon L. Amidon, and Valentino J. Stella. 1986. Chemical Stability of Pharmaceuticals: A Handbook for Pharmacists, 2nd ed.. New York: Wiley. https://doi.org/10.1002/0471734683.
  4. Rumble, John R., ed. 2019. CRC Handbook of Chemistry and Physics: 100th Edition. Boca Raton, FL: CRC Press. https://hbcp.chemnetbase.com/.
  5. Urben, Peter G. 2017. Bretherick's Handbook of Reactive Chemical Hazards, 8th Edition. Academic Press / Elsevier, Oxford. https://www.sciencedirect.com/book/9780081010594.

📘 Monografien

  1. IARC. 2026. IARC Monographs on the Identification of Carcinogenic Hazards to Humans: CAS 80-05-7. Lyon, France: International Agency for Research on Cancer, World Health Organization. (Accessed 2026-11-12.)

📄 Wissenschaftliche Artikel (peer-reviewed)

  1. Stefanis, Emmanuel, and Costas Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." International Journal of Thermophysics 29: 568-585. https://doi.org/10.1007/s10765-008-0415-z.
  2. Stoll, Vincent S., and John S. Blanchard. 1990. "Buffers: Principles and Practice: In Methods in Enzymology, vol. 182." San Diego: Academic Press. https://doi.org/10.1016/0076-6879(90)82008-P.

🌐 Websites

  1. ECHA. 2023. "Guidance on the Application of the CLP Criteria." European Chemicals Agency. https://echa.europa.eu/guidance-documents/guidance-on-clp.
  2. European Parliament. 2006. "Regulation (EC) No 1907/2006 (REACH)." Official Journal of the European Union L 396: 1–849.
  3. ECHA. 2023. "Candidate List of Substances of Very High Concern for Authorisation." European Chemicals Agency. https://echa.europa.eu/candidate-list-table.
  4. European Parliament. 2008. "Regulation (EC) No 1272/2008 on Classification, Labelling and Packaging of Substances and Mixtures (CLP)." Official Journal of the European Union L 353: 1–1355.
  5. ECHA. 2017. "Guidance on the Compilation of Safety Data Sheets." Version 3.1. European Chemicals Agency. ECHA-17-G-01-EN. https://echa.europa.eu/documents/10162/23047722/sds_en.pdf.
  6. ECHA. 2022. "Restrictions Under REACH — Annex XVII." European Chemicals Agency. https://echa.europa.eu/substances-restricted-under-reach.
  7. United Nations. 2021. Globally Harmonized System of Classification and Labelling of Chemicals (GHS). 9th revised ed. ST/SG/AC.10/30/Rev.9. New York and Geneva: United Nations. https://unece.org/ghs-rev9-2021.
  8. ECHA. 2020. "Understanding REACH." European Chemicals Agency. https://echa.europa.eu/regulations/reach/understanding-reach.
  9. U.S. OSHA. 2026. "Occupational Safety and Health Guidance: CAS 80-05-7." Washington, DC: U.S. Occupational Safety and Health Administration. https://www.osha.gov/hazwoper. (Accessed 2026-11-12.)
  10. National Fire Protection Association (2018) — NFPA 472: Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents https://www.nfpa.org/codes-and-standards/nfpa-472.
  11. European Union. 2026. "EUR-Lex Legal Database: CAS 80-05-7." Luxembourg: Publications Office of the European Union. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex:32012L0018. (Accessed 2026-11-12.)
  12. U.S. National Institute for Occupational Safety and Health (2024) — NIOSH Pocket Guide to Chemical Hazards https://www.cdc.gov/niosh/npg/.
  13. Snyder, Lloyd R., John W. Dolan, and Joseph J. Kirkland. 2010. Introduction to Modern Liquid Chromatography. Wiley.
  14. Schoenmakers, Peter J.. 1986. Optimization of Chromatographic Selectivity: A Guide to Method Development. Elsevier.
  15. Snyder, L. R., and J. W. Dolan. 2007. High-Performance Gradient Elution: The Practical Application of the Linear-Solvent-Strength Model. Wiley.
  16. Nikitas, Pavlos, and Adrian Pappa-Louisi. 2009. "Retention models for isocratic and gradient elution in reversed-phase liquid chromatography." Journal of Chromatography A 1216: 1737-1755. https://doi.org/10.1016/j.chroma.2008.10.005.
  17. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." Journal of Chromatography A 1216: 1764-1772. https://doi.org/10.1016/j.chroma.2008.11.094.
  18. Dong, Michael W.. 2019. HPLC and UHPLC for Practicing Scientists. Wiley. https://doi.org/10.1002/9781119313793.
  19. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." Journal of Separation Science 30: 1167-1182. https://doi.org/10.1002/jssc.200700026.
  20. Dolan, John W.. 2013. "When to Modify Method Conditions." LCGC North America 31: 192-199. https://www.chromatographyonline.com/view/when-modify-method-conditions.
  21. Meyer, Veronika R.. 2010. Practical High-Performance Liquid Chromatography. Wiley.
  22. Engelhardt, Heinz. 2014. 100 Years of Chromatography. Wiley-VCH.
  23. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." Analytical Chemistry 82: 8525-8531. https://doi.org/10.1021/ac101742z.
  24. Van Deemter, J. J., F. J. Zuiderweg, and A. Klinkenberg. 1956. "Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography." https://doi.org/10.1016/0009-2509(56)80003-1.
  25. Giddings, J. Calvin. 1965. "Dynamics of Chromatography, Part I: Principles and Theory." Marcel Dekker.
  26. Poppe, Hans. 1997. "Some reflections on speed and efficiency of modern chromatographic methods." https://doi.org/10.1016/S0021-9673(97)00376-2.
  27. Wu, Naijun, and Anton M. Clausen. 2007. "Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations." https://doi.org/10.1002/jssc.200700026.
  28. Carr, Peter W.. 2009. "The new physical chemistry of HPLC." https://doi.org/10.1016/j.chroma.2008.11.094.
  29. Knox, John H.. 1977. "Practical aspects of LC theory." https://doi.org/10.1093/chromsci/15.9.352.
  30. Snyder, L. R., J. J. Kirkland, and J. L. Glajch. 1997. "Practical HPLC Method Development." Wiley.
  31. Vivó-Truyols, Gabriel, and Hans-Gerd Janssen. 2010. "Probabilistic approach to peak deconvolution in chromatography." https://doi.org/10.1021/ac101742z.
  32. Sadek, Paul C.. 2002. "The HPLC Solvent Guide." Wiley-Interscience.
  33. Snyder, L. R.. 1978. "Classification of the solvent properties of common liquids." https://doi.org/10.1093/chromsci/16.6.223.
  34. Reichardt, Christian, and Thomas Welton. 2010. "Solvents and Solvent Effects in Organic Chemistry." Wiley-VCH.
  35. Vailaya, Anant, and Csaba Horváth. 1998. "Retention thermodynamics in hydrophobic interaction chromatography." https://doi.org/10.1021/ie980212h.
  36. Krstulović, Andrea M., and Phyllis R. Brown. 1981. "Reversed-phase High-Performance Liquid Chromatography." Wiley.
  37. Boysen, Reinhard I., and Milton T. W. Hearn. 2009. "Multi-modal HPLC of proteins." https://doi.org/10.1093/chromsci/47.8.645.
  38. USP General Chapter <621>. 2024. "Chromatography." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  39. Foley, Joe P., and John G. Dorsey. 1983. "Equations for calculation of chromatographic figures of merit for ideal and skewed peaks." https://doi.org/10.1021/ac00255a033.
  40. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." Wiley. https://doi.org/10.1002/9780470508183.
  41. Dolan, John W.. 2003. "Peak tailing and resolution." https://www.chromatographyonline.com/view/peak-tailing-and-resolution.
  42. Kromidas, Stavros. 2017. "HPLC Made to Measure: A Practical Handbook for Optimization." Wiley-VCH.
  43. Heyden, Yvan Vander, et al.. 2009. "Robustness of pharmaceutical liquid chromatographic methods." https://doi.org/10.1016/j.jchromb.2008.10.052.
  44. United States Pharmacopeial Convention. 2024. "USP <621> Chromatography." In United States Pharmacopeia and National Formulary, USP 47-NF 42. Rockville, MD: USP. https://www.uspnf.com/.
  45. European Pharmacopoeia Commission. 2024. "2.2.46 Chromatographic Separation Techniques." In European Pharmacopoeia, 11th ed. Strasbourg: Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  46. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories." Geneva: ISO. https://www.iso.org/standard/66912.html.
  47. Kolthoff, Izaak Maurits, and Philip J. Elving, eds. 1978. Treatise on Analytical Chemistry, Part I: Theory and Practice. 2nd ed. New York: Wiley-Interscience.
  48. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2018. Principles of Instrumental Analysis. 7th ed. Boston: Cengage Learning.
  49. Christian, Gary D., Purnendu K. Dasgupta, and Kevin A. Schug. 2014. Analytical Chemistry. 7th ed. Hoboken, NJ: Wiley.
  50. EURACHEM/CITAC. 2012. "Quantifying Uncertainty in Analytical Measurement." 3rd ed. EURACHEM/CITAC Guide CG 4. https://www.eurachem.org/images/stories/Guides/pdf/QUAM2012_P1.pdf.
  51. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. "Introduction to Modern Liquid Chromatography." John Wiley & Sons. https://doi.org/10.1002/9780470508183.
  52. Dolan, John W.. 2003. "How much resolution is enough?." https://www.chromatographyonline.com/view/how-much-resolution-enough.
  53. USP General Chapter <621>. 2024. "Chromatography (System Suitability section)." United States Pharmacopeial Convention. https://www.usp.org/harmonization-standards/pdg/general-chapters/chromatography.
  54. U.S. FDA. 2026. "FDA Guidance and Resources: CAS 80-05-7." Silver Spring, MD: U.S. Food and Drug Administration. https://www.fda.gov/media/74954/download. (Accessed 2026-11-12.)
  55. Rozet, Eric, et al.. 2013. "Analysis of recent pharmaceutical regulatory documents on analytical method validation." https://doi.org/10.1016/j.chroma.2007.03.111.
  56. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  57. Kazakevich, Yuri V., and Rosario LoBrutto, eds.. 2007. "HPLC for Pharmaceutical Scientists." Wiley-Interscience. https://doi.org/10.1002/9780470087954.
  58. AOAC International. 2016. "Appendix F: Guidelines for Standard Method Performance Requirements." AOAC INTERNATIONAL. https://www.aoac.org/wp-content/uploads/2019/08/app_f.pdf.
  59. International Organization for Standardization. 1994. "ISO 5725-2:1994 Accuracy (Trueness and Precision) of Measurement Methods and Results — Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method." Geneva: ISO. https://www.iso.org/standard/11834.html.
  60. Grubbs, Frank E. 1950. "Sample Criteria for Testing Outlying Observations." Annals of Mathematical Statistics 21 (1): 27–58.
  61. Dixon, Wilfrid J. 1950. "Analysis of Extreme Values." Annals of Mathematical Statistics 21 (4): 488–506.
  62. Snedecor, George W., and William G. Cochran. 1989. Statistical Methods. 8th ed. Ames, IA: Iowa State University Press.
  63. Student [William Sealy Gosset]. 1908. "The Probable Error of a Mean." Biometrika 6 (1): 1–25.
  64. International Organization for Standardization. 2005. "ISO 3534-1:2006 Statistics — Vocabulary and Symbols — Part 1: General Statistical Terms and Terms Used in Probability." Geneva: ISO. https://www.iso.org/standard/40145.html.
  65. Thompson, Michael, Stephen L. R. Ellison, and Roger Wood. 2002. "Harmonized Guidelines for Single-Laboratory Validation of Methods of Analysis." Pure and Applied Chemistry 74 (5): 835–855.
  66. United Nations Economic Commission for Europe. 2024. European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR), Applicable as from 1 January 2025 (ECE/TRANS/352). Geneva: UNECE. https://unece.org/transport/dangerous-goods/adr-2025-edition.
  67. International Air Transport Association. 2026. Dangerous Goods Regulations (DGR). 67th ed. Montreal: IATA. https://www.iata.org/en/programs/cargo/dgr/.
  68. International Maritime Organization. 2024. International Maritime Dangerous Goods (IMDG) Code, 2024 Edition (Amendment 42-24). London: IMO. https://www.imo.org/en/OurWork/Safety/Pages/DangerousGoods-default.aspx.
  69. United Nations. 2025. Recommendations on the Transport of Dangerous Goods: Model Regulations (Orange Book). 24th revised ed. ST/SG/AC.10/1/Rev.24. New York and Geneva: United Nations. https://unece.org/transport/dangerous-goods/un-model-regulations.
  70. International Civil Aviation Organization. 2025. Technical Instructions for the Safe Transport of Dangerous Goods by Air (Doc 9284). 2025–2026 ed. Montreal: ICAO. https://www.icao.int/safety/DangerousGoods/Pages/technical-instructions.aspx.
  71. United States Pharmacopeia (USP) Convention. 2024. "USP General Chapter <621> Chromatography." USP. https://www.usp.org/sites/default/files/usp/document/harmonization/gen-chapter/g05_pf_30_4_2004.pdf.
  72. European Medicines Agency (EMA). 2011. "Guideline on bioanalytical method validation EMEA/CHMP/EWP/192217/2009." EMA Committee for Medicinal Products for Human Use. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-bioanalytical-method-validation_en.pdf.
  73. Sejm RP. 2026. "Internetowy System Aktow Prawnych (ISAP): CAS 80-05-7." Warszawa: Kancelaria Sejmu Rzeczypospolitej Polskiej. https://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20200000010. (Accessed 2026-11-12.)
  74. Ministerstwo Klimatu i Srodowiska. 2026. "Baza Danych o Odpadach (BDO): CAS 80-05-7." Warszawa: Ministerstwo Klimatu i Srodowiska. https://bdo.mos.gov.pl/. (Accessed 2026-11-12.)
  75. Pohanish, Richard P.. 2017. "Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens." Elsevier.
  76. Lewis, Richard J.. 2012. "Sax's Dangerous Properties of Industrial Materials." Wiley.
  77. NIOSH. 2024. "Pocket Guide to Chemical Hazards." U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/npg/.
  78. United Nations Economic Commission for Europe (UNECE). 2023. "European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." UNECE. https://unece.org/transport/standards/transport/dangerous-goods/adr-2025.
  79. IPCS INCHEM. 2024. "International Programme on Chemical Safety — Waste Management Guidelines." WHO/UNEP/ILO. https://www.inchem.org/.
  80. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories." ISO. https://www.iso.org/standard/66912.html.
  81. World Health Organization. 2010. "WHO Good Manufacturing Practices for Pharmaceutical Products: Main Principles (WHO Technical Report Series No. 957, Annex 3)." WHO Press. https://www.who.int/publications/m/item/trs957-annex3.
  82. European Medicines Agency. 2014. "Guideline on Process Validation for Finished Products — Information and Data to Be Provided EMA/CHMP/CVMP/QWP/BWP/70278/2012." European Medicines Agency. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-process-validation-finished-products-information-data-be-provided-regulatory-submissions-revision-1_en.pdf.
  83. United States Pharmacopeial Convention. 2024. "United States Pharmacopeia and National Formulary, USP 47-NF 42." USP. https://www.uspnf.com/.
  84. European Pharmacopoeia Commission. 2024. "European Pharmacopoeia 11th Edition." Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  85. Pharmaceutical Inspection Co-operation Scheme (PIC/S). 2021. "Guide to Good Manufacturing Practice for Medicinal Products PE 009-15." PIC/S Secretariat, Geneva. https://picscheme.org/en/publications.
  86. International Pharmaceutical Excipients Council (IPEC) and Pharmaceutical Quality Group (PQG). 2017. "Joint IPEC-PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients." IPEC-Americas. https://ipecamericas.org/sites/default/files/IPECPQGGMPGuide2017.pdf.
📥 BibTeX herunterladen📥 RIS herunterladenImport in Zotero/Mendeley/EndNote/Papers.